PDA

View Full Version : Ports on Firewall



karlsatch
2023-06-09, 20:47
Hi,

I have these ports enabled in my firewall
Is this unsafe or not?

2000/tcp open cisco-sccp
4444/tcp open krb524
5060/tcp open sip
8000/tcp open http-alt
8001/tcp open vcom-tunnel


53/udp open domain
500/udp open isakmp
5060/udp open|filtered sip

Thanks.

Gavin Justin
2023-07-07, 10:05
Ports in computer firewall control whether or not a program can access or be accessed by your computer. There are altogether 65,535 ports available for both TCP and UDP.

Free-Mind
2023-07-14, 16:50
The ports you have enabled in your firewall are used for a variety of purposes, some of which are more secure than others.



2000/tcp open cisco-sccp is used for Cisco IP telephony. It is a relatively secure protocol, but it is still possible for attackers to exploit it.
4444/tcp open krb524 is used for Kerberos authentication. Kerberos is a secure authentication protocol, but it is also possible for attackers to exploit it.
5060/tcp open sip is used for Session Initiation Protocol (SIP). SIP is a widely used protocol for voice over IP (VoIP) calls. It is not as secure as some other protocols, but it is still considered to be secure enough for most applications.
8000/tcp open http-alt is an alternate HTTP port. It is not used by any major applications, so it is not a security concern.
8001/tcp open vcom-tunnel is used by the VCOM remote access software. It is not a widely used protocol, so it is not a security concern.
53/udp open domain is used for Domain Name System (DNS) queries. DNS is a critical service, so it is important to keep this port open.
500/udp open isakmp is used for the Internet Security Association and Key Management Protocol (ISAKMP). ISAKMP is used to establish secure tunnels between two hosts. It is a secure protocol, but it is also possible for attackers to exploit it.
5060/udp open|filtered sip is a filtered version of the SIP port. This means that only certain types of traffic are allowed to pass through this port. It is a more secure configuration than simply opening the port to all traffic.


Overall, the ports you have enabled in your firewall are a mix of secure and less secure protocols. It is important to assess your specific needs and risks to determine which ports you need to keep open and which ones you can close.

marshray
2023-10-14, 12:41
Hi,

I have these ports enabled in my firewall
Is this unsafe or not?

2000/tcp open uae visa check (https://emiratesidofficial.com/uae-visa-status-check/) cisco-sccp
4444/tcp open krb524
5060/tcp open qatar visa check (https://idvisahub.com/qatar-visa-check/) sip
8000/tcp open http-alt
8001/tcp open vcom-tunnel


53/udp open domain
500/udp open isakmp
5060/udp open|filtered sip

Thanks.


Certainly, having certain ports open in your firewall does not inherently signify an unsafe network configuration. The safety of these open ports depends on the services running behind them and how well those services are secured. For instance, ports like 53/udp (domain) and 5060/udp (sip) are standard and essential for DNS resolution and SIP communication, respectively. Keeping these open is necessary for regular network operations. However, ports like 4444/tcp (krb524) and 500/udp (isakmp) should be approached with caution. While they serve legitimate purposes, such as Kerberos authentication and VPN setup, respectively, they can pose security risks if not configured properly. Additionally, non-standard ports like 8000/tcp (http-alt) and 8001/tcp (vcom-tunnel) warrant attention. It's crucial to verify the necessity of these ports and ensure that any services using them are securely configured and up-to-date. Regular monitoring, updating security measures, and restricting ports to only necessary services are essential practices in maintaining a safe and secure network environment.

miafrance
2023-10-28, 11:10
Hi,

I have these ports enabled in my firewall
Is this unsafe or not?

2000/tcp open cisco-sccp
4444/tcp open krb524
5060/tcp open sip
8000/tcp open http-alt
8001/tcp open vcom-tunnel


53/udp open domain
500/udp open isakmp
5060/udp open|filtered sip

Thanks.
The safety of having these ports open in your firewall depends on several factors, including your specific network configuration, the services running on these ports, and your security requirements. Here's a brief overview of the ports you've mentioned: 2000/tcp (cisco-sccp): This port is commonly associated with the Cisco Skinny Client Control Protocol. If you have Cisco devices in your network that rely on this protocol, you might need it. However, if not, it's generally a good practice to close unnecessary ports. 4444/tcp (krb524): This port is often used for the Kerberos 524 service. It's typically associated with authentication services. Ensure that only authorized users and services can access this port. 5060/tcp (sip): This port is used for the Session Initiation Protocol (SIP), which is commonly used for VoIP and multimedia communication. If your network uses SIP services, it's necessary, but you should implement strong security measures as SIP can be a target for attacks. 8000/tcp (http-alt): Port 8000 is not a standard HTTP port (which is 80). If it's used in your network for a specific application or service, make sure that it's secured, and only authorized users have access. 8001/tcp (vcom-tunnel): The specific use of port 8001 might depend on the application or service using it. If it's not needed, consider closing it to reduce potential attack vectors. 53/udp (domain): Port 53 is associated with DNS (Domain Name System). This is a necessary service for internet connectivity. It's generally safe to keep this port open, but make sure your DNS servers are properly configured and secure. 500/udp (isakmp): ISAKMP (Internet Security Association and Key Management Protocol) is used for establishing security associations and key management, similar to ensuring the smooth operation of a glass shower door hinge (https://www.bellerhardware.com/) for safety and security. It's part of IPsec VPNs. If you're using VPN services, it's necessary. 5060/udp (sip): Similar to port 5060/tcp, this is used for SIP. If you're using SIP services, it's essential, Ensuring that your SIP infrastructure is secure is crucial for maintaining the overall safety of your network. Just like you carefully evaluate and manage open ports to safeguard your system, it's essential to extend this diligence when exploring content like. Always prioritize security in your network setup, allowing only necessary ports to remain open for functionality. Regularly reviewing and adjusting firewall rules ensures they align with your security policies. If you're uncertain about the safety of any specific port, seeking advice from a network or security professional is a wise step for a thorough analysis of your network's security posture.