pr0xibus
2024-02-06, 08:30
Morning Folks.
Nvidia 4070TI
I have Kali installed on a separate Drive, The install went fine, but upon boot, There was an error Unknown Chipset.
So I booted into Recovery, Disabled Nouveau, and installed the Nvidia Drivers from the .run along with Kernel-Headers.
Upon boot I do not get the message, but I do get a black screen, I am also unable to change tty.
If I boot into Recovery Mode, Nouveau isnt loaded and Nvidia is, and it all runs fine. Any ideas where to look for this issue?
crc_t10dif 16384 1 t10_pi
aesni_intel 360448 0
drm 802816 17 gpu_sched,drm_kms_helper,drm_exec,drm_suballoc_hel per,drm_display_helper,nvidia,drm_buddy,amdgpu,drm _ttm_helper,nvidia_drm,ttm,amdxcp
crct10dif_generic 12288 0
usbcore 405504 6 xhci_hcd,usbhid,usb_storage,btusb,xhci_pci,uas
mdio_devres 12288 1 r8169
scsi_mod 331776 5 sd_mod,usb_storage,uas,libata,sg
crypto_simd 16384 1 aesni_intel
crct10dif_pclmul 12288 1
crc64 16384 2 crc64_rocksoft,crc64_rocksoft_generic
libphy 237568 3 r8169,mdio_devres,realtek
cryptd 28672 2 crypto_simd,ghash_clmulni_intel
i2c_piix4 32768 0
video 77824 3 asus_wmi,amdgpu,nvidia_modeset
scsi_common 16384 6 scsi_mod,sd_mod,usb_storage,uas,libata,sg
usb_common 20480 2 xhci_hcd,usbcore
crct10dif_common 12288 3 crct10dif_generic,crc_t10dif,crct10dif_pclmul
gpio_amdpt 16384 0
wmi 40960 3 video,asus_wmi,wmi_bmof
gpio_generic 20480 1 gpio_amdpt
button 24576 0
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=1280x720,1280x800,auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
insmod gfxmenu
insmod png
set theme=($root)/boot/grub/themes/kali/theme.txt
export theme
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
insmod png
if background_image /usr/share/grub/themes/kali/grub-16x9.png; then
set color_normal=white/black
set color_highlight=black/white
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Kali GNU/Linux' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.6.9-amd64 ...'
linux /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.6.9-amd64
}
submenu 'Advanced options for Kali GNU/Linux' $menuentry_id_option 'gnulinux-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
menuentry 'Kali GNU/Linux, with Linux 6.6.9-amd64' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.6.9-amd64-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.6.9-amd64 ...'
linux /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.6.9-amd64
}
menuentry 'Kali GNU/Linux, with Linux 6.6.9-amd64 (recovery mode)' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.6.9-amd64-recovery-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.6.9-amd64 ...'
linux /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.6.9-amd64
}
menuentry 'Kali GNU/Linux, with Linux 6.5.0-kali3-amd64' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.5.0-kali3-amd64-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.5.0-kali3-amd64 ...'
linux /boot/vmlinuz-6.5.0-kali3-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.5.0-kali3-amd64
}
menuentry 'Kali GNU/Linux, with Linux 6.5.0-kali3-amd64 (recovery mode)' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.5.0-kali3-amd64-recovery-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.5.0-kali3-amd64 ...'
linux /boot/vmlinuz-6.5.0-kali3-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.5.0-kali3-amd64
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/nvme0n1p1)' --class windows --class os $menuentry_id_option 'osprober-efi-B46E-697F' {
insmod part_gpt
insmod fat
search --no-floppy --fs-uuid --set=root B46E-697F
chainloader /efi/Microsoft/Boot/bootmgfw.efi
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'UEFI Firmware Settings' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg
fi
### END /etc/grub.d/41_custom ###
Nvidia 4070TI
I have Kali installed on a separate Drive, The install went fine, but upon boot, There was an error Unknown Chipset.
So I booted into Recovery, Disabled Nouveau, and installed the Nvidia Drivers from the .run along with Kernel-Headers.
Upon boot I do not get the message, but I do get a black screen, I am also unable to change tty.
If I boot into Recovery Mode, Nouveau isnt loaded and Nvidia is, and it all runs fine. Any ideas where to look for this issue?
crc_t10dif 16384 1 t10_pi
aesni_intel 360448 0
drm 802816 17 gpu_sched,drm_kms_helper,drm_exec,drm_suballoc_hel per,drm_display_helper,nvidia,drm_buddy,amdgpu,drm _ttm_helper,nvidia_drm,ttm,amdxcp
crct10dif_generic 12288 0
usbcore 405504 6 xhci_hcd,usbhid,usb_storage,btusb,xhci_pci,uas
mdio_devres 12288 1 r8169
scsi_mod 331776 5 sd_mod,usb_storage,uas,libata,sg
crypto_simd 16384 1 aesni_intel
crct10dif_pclmul 12288 1
crc64 16384 2 crc64_rocksoft,crc64_rocksoft_generic
libphy 237568 3 r8169,mdio_devres,realtek
cryptd 28672 2 crypto_simd,ghash_clmulni_intel
i2c_piix4 32768 0
video 77824 3 asus_wmi,amdgpu,nvidia_modeset
scsi_common 16384 6 scsi_mod,sd_mod,usb_storage,uas,libata,sg
usb_common 20480 2 xhci_hcd,usbcore
crct10dif_common 12288 3 crct10dif_generic,crc_t10dif,crct10dif_pclmul
gpio_amdpt 16384 0
wmi 40960 3 video,asus_wmi,wmi_bmof
gpio_generic 20480 1 gpio_amdpt
button 24576 0
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=1280x720,1280x800,auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
insmod gfxmenu
insmod png
set theme=($root)/boot/grub/themes/kali/theme.txt
export theme
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
insmod png
if background_image /usr/share/grub/themes/kali/grub-16x9.png; then
set color_normal=white/black
set color_highlight=black/white
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Kali GNU/Linux' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.6.9-amd64 ...'
linux /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.6.9-amd64
}
submenu 'Advanced options for Kali GNU/Linux' $menuentry_id_option 'gnulinux-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
menuentry 'Kali GNU/Linux, with Linux 6.6.9-amd64' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.6.9-amd64-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.6.9-amd64 ...'
linux /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.6.9-amd64
}
menuentry 'Kali GNU/Linux, with Linux 6.6.9-amd64 (recovery mode)' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.6.9-amd64-recovery-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.6.9-amd64 ...'
linux /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.6.9-amd64
}
menuentry 'Kali GNU/Linux, with Linux 6.5.0-kali3-amd64' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.5.0-kali3-amd64-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.5.0-kali3-amd64 ...'
linux /boot/vmlinuz-6.5.0-kali3-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.5.0-kali3-amd64
}
menuentry 'Kali GNU/Linux, with Linux 6.5.0-kali3-amd64 (recovery mode)' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.5.0-kali3-amd64-recovery-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
echo 'Loading Linux 6.5.0-kali3-amd64 ...'
linux /boot/vmlinuz-6.5.0-kali3-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-6.5.0-kali3-amd64
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/nvme0n1p1)' --class windows --class os $menuentry_id_option 'osprober-efi-B46E-697F' {
insmod part_gpt
insmod fat
search --no-floppy --fs-uuid --set=root B46E-697F
chainloader /efi/Microsoft/Boot/bootmgfw.efi
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'UEFI Firmware Settings' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg
fi
### END /etc/grub.d/41_custom ###