View Full Version : utlite pro mSATA install possible?
I've got a utilite pro on the way, 2GB ram 32GB mSATA, is it possible to install kali onto the mSata storage?
I can see writeups on SD card booting as with the BBB, issues I have with the BBB for instance is the lack of emc access, kali runs from the SD card.
Possible to liveboot and install maybe somehow?
alone@::1
2014-05-03, 19:47
Yes, you can install and boot Kali from the SSD.
I have got me the same hardware, but can't use it as an accesspoint.
Seems to be a either a driver problem or my lack of knowledge for me.
nice thanks, I too intend to use it as an AP,
---
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): using nl80211 for WiFi device control
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): new 802.11 WiFi device (driver: 'mwifiex_sdio' ifindex: 5)
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): exported as /org/freedesktop/NetworkManager/Devices/2
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): now managed
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): bringing up device.
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): preparing device.
Apr 7 07:20:05 utilite-desktop NetworkManager[2723]: <info> (mlan0): deactivating device (reason 'managed') [2]
---
Could be the driver as you suspect, I also have a Alfa AWUS036NH I can attach via USB though for a fall back.
I'll be placing Suricata on this also taking advantage of the two NIC devices, see how far I can push this hardware
Yes, you could install it, but you'll definitely need to be familiar with installing Linux since it won't be automated.
Hi, Is there a script. I have built the Img file and installed it on an SD card- Boots fine. So I have a blank SDD and a boot Kali on SD card. IS there a script to install this on the SSD ( I guess it would be the same script as in Old backtrack to install to HDD?
Install Kali on SSD
Hi,
I have both built and Image and download the Kali 106 image using this:
http://www.kali.org/penetration-testing ... 3-utilite/. Installed on SD card and boot fine.
Then I am lost -- doing a DD just give me 6 gig out of 32 on the SSD.
However, how do I install it on the SSD? I am new to this so please be gentle. I have looked and cross checked. I was hoping that I could use a modified version of the installer from the Utilite SSD install alas the skill is missing.
Any help would be appreciated.
http://trimslice.com/forum/viewtopic.php?f=62&t=1616&p=7488#p7488
This is the summary of what I did:
Make two SD Cards
Plug both SD cards into Utilite Pro
One via normal slot the other via an adapter.
Boot into Kali 1.0.6
root@kali:~# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 6.7G 1.8G 4.6G 28% /
/dev/root 6.7G 1.8G 4.6G 28% /
devtmpfs 980M 0 980M 0% /dev
tmpfs 196M 2.7M 194M 2% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 392M 0 392M 0% /run/shm
root@kali:~# fdisk -l
The SSD Drive
Disk /dev/sda: 32.0 GB, 32017047552 bytes
255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf0b6748f
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 c W95 FAT32 (LBA)
/dev/sda2 206848 62533295 31163224 83 Linux
The Second SD Card:
Disk /dev/mmcblk0: 31.5 GB, 31486640128 bytes
4 heads, 32 sectors/track, 480448 cylinders, total 61497344 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000084f6
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 2048 264191 131072 c W95 FAT32 (LBA)
/dev/mmcblk0p2 264192 14335999 7035904 83 Linux
Device Boot Start End Blocks Id System
/dev/sdb1 2048 264191 131072 c W95 FAT32 (LBA)
/dev/sdb2 264192 14335999 7035904 83 Linux
Install a terminal that does cut and paste if needed:
apt-get install gnome-terminal
Install wget and dosfstools if needed:
apt-get install dosfstools
Create and mount the vfat filesystem:
mkfs.vfat /dev/sda1
mkdir boot
mount /dev/sda1 boot
Create and mount the ext4 filesystem:
mkfs.ext4 /dev/sda2
mkdir root
mount /dev/sda2 root
Mount 2nd SD Card
cd /
cd media/
mkdir sdcarda
mkdir sdcardb
mount /dev/sdb1 /media/sdcarda
mount /dev/sdb2 /media/sdcardb
cd /root/boot
cp -avr /media/sdcarda/* .
`/media/sdcarda/uImage-cm-fx6' -> `./uImage-cm-fx6'
cd ..
cd root
cp -avr /media/sdcardb/* .
sync; sync
removed cards and reboot
All credit to http://archlinuxarm.org/platforms/armv7 ... le/utilite and pepedog.
Cheers,
zenroth
Install Kali on SSD
Hi,
I have both built and Image and download the Kali 106 image using this:
http://www.kali.org/penetration-testing ... 3-utilite/. Installed on SD card and boot fine.
Then I am lost -- doing a DD just give me 6 gig out of 32 on the SSD.
However, how do I install it on the SSD? I am new to this so please be gentle. I have looked and cross checked. I was hoping that I could use a modified version of the installer from the Utilite SSD install alas the skill is missing.
Any help would be appreciated.