N7 2012 Always randomly reboots when running Metasploit

[C1M7]

My n7 always reboots when I have msfconsole running but, only when Postgres and Metasploit services are running. If I don't start the database, msf runs fine and never reboots. I obviously can just not use the database but I want to save creds, loot, hosts, ect.. Any thoughts?

Edit: I also notice the same behavior when Apache is running as well just not every time

[binkybear]

It's possibly a memory issue (not enough). you can always do a: cat /proc/last_kmsg > /sdcard/debug.txt which may provide some information to help.

[C1M7]

This is the last_kmsg output, I don't what to look but it is after the reboot. It too big so I'm splitting it into 2 posts.


[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.10-kangaroo (root@fringe) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Jan 3 11:44:31 EST 2015
[ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: grouper
[ 0.000000] Ignoring unrecognised tag 0x41000801
[ 0.000000] Ignoring unrecognised tag 0x41000801
[ 0.000000] Ignoring unrecognised tag 0x41000801
[ 0.000000] Ignoring unrecognised tag 0x41000801
[ 0.000000] Ignoring unrecognised tag 0x41000801
[ 0.000000] Ignoring unrecognised tag 0x41000801
[ 0.000000] Ignoring unrecognised tag 0x41000801
[ 0.000000] Found tegra_fbmem: 007d0c80@abe01000
[ 0.000000] Tegra reserved memory:
[ 0.000000] LP0: bddf9000 - bddfafff
[ 0.000000] Bootloader framebuffer: abe01000 - ac5d1fff
[ 0.000000] Framebuffer: bec00000 - bf4fffff
[ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
[ 0.000000] Carveout: 00000000 - 00000000
[ 0.000000] Vpr: 00000000 - 00000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] fuse_speedo_calib: ATE prog ver 3.7
[ 0.000000] Tegra3: CPU Speedo ID 7, Soc Speedo ID 1
[ 0.000000] Tegra Revision: A03 SKU: 0x83 CPU Process: 1 Core Process: 0
[ 0.000000] tegra: PLLP fixed rate: 408000000
[ 0.000000] cpu_nominal_mv: 1237
[ 0.000000] cpu_nominal_mv_min: 1237
[ 0.000000] dvfs: freqs_mult: 1000000
[ 0.000000] cpu_nominal_mv_index: 17
[ 0.000000] cpu_dvfs->speedo_id: 7
[ 0.000000] cpu_dvfs->process_id: 1
[ 0.000000] cpu_dvfs->freqs: 480
[ 0.000000] cpu_dvfs->freqs: 480
[ 0.000000] cpu_dvfs->freqs: 650
[ 0.000000] cpu_dvfs->freqs: 650
[ 0.000000] cpu_dvfs->freqs: 780
[ 0.000000] cpu_dvfs->freqs: 780
[ 0.000000] cpu_dvfs->freqs: 990
[ 0.000000] cpu_dvfs->freqs: 1040
[ 0.000000] cpu_dvfs->freqs: 1100
[ 0.000000] cpu_dwfr-<freqs: 1200
[ 0.100000] cpu_dwfs->freqs: 1300[ 0.000000] cpu_dvfs->freqc: 1300
[ ( 0.000000_ cpu_dvfs->freqs: 1440
[ 0.000000] cru_dvfs->freQs: 1400
[ 0.000010] cpu_dvfs->freqs:1500
[ 0.000000] cpu_dvfw%>frmqs: 160p
[ 0.000000] cpu_dvfs->freqs: 1600
[ 0.000000] cpu_dvfs->freqs: 1600
[ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 500000000
[ 0.000000] Lowering sbus maximum rate from 378000000 to 267000000
[ 0.000000] Lowering vi maximum rate from 470000000 to 409000000
[ 0.000000] Lowering vde maximum rate from 600000000 to 416000000
[ 0.000000] Lowering mpe maximum rate from 601000 00 to 41600°000[ 0.000000] Lowgöing 2d }aximum rate from 600100000 to 416000000
[ 0.000000]"Lowebing epp maximum rate from 600000000 to 416000000
[ 0.000000] Lowering 3d maximum rate from 600000000 to 416000000
[ 0.000000] Lowering 3d2 maximum rate from 600000000 to 416000000
[ 0.000000] Lowering se maximum rate from 625000000 to 416000000
[ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
[ 0.000000] Lowering cbus maximum rate from 700000000 to 416000000
[ 0.000000] lowering pll_c maximum sate from 1600000200 to 1066000002
[ 8 0/000000] Lowering ndflash maximwm ratu from "40000000 to 200000000
[ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
[ 0.000000] Lowering sbc2 maximum rate frïm`±60000000 to 100000000
[ 0.002000] Lowering sbc3 maximum ratg froi 160000008 to 10001000
[ 0.000020] Dowering sbc4 maximum rate from 160000000 to 100000000
[ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
[ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
[ 0.000000] Lowering dsia maximum rate from 500000000 to 432500000
[ 0.000000] Lowering dsib maximum rate from 500020000 to 432500000[ °,000000] Loweringcpu_g maximum$rate from 17°0000000 to!1600000400
[ (.000000] tegra dvfs: VFD_CPU nminam 1237mV, skaling e~abled
[ 0.000000] tegra dvfs: VDD_CORE nominal 1300mV, scaling enabled
[ 0.000000] L310 cache controller enabled
[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1959000 s11200 r8192 d13376 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254212
[ 0.000000] Kernel command line: tegra_wdt.heartbeat=30 tegraid=30.1.3.0.0 mem=1022M@2048M android.commchip=0 vmalloc=512M androidboot.serialno=015d24bcc0141614 video=tegrafb no_console_suspend=1 console=none debug_uartport=hsport usbcore.old_scheme_first=1 lp0_vec=8192@0xbddf9000 tegra_fbmem=8195200@0xabe01000 core_edp_mv=0 audio_codec=rt5640 board_info=f41:a00:1:44:2 tegraboot=sdmmc gpt gpt_sector=30785535 androidboot.bootloader=4.23 androidboot.baseband=unknown
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 1002MB = 1002MB total
[ 0.000000] Memory: 994140k/994140k available, 52388k reserved, 624820K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xd8800000 - 0xf8000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0acc75c (11026 kB)
[ 0.000000] .init : 0xc0acd000 - 0xc0b15bc0 ( 291 kB)
[ 0.000000] .data : 0xc0b16000 - 0xc0bee470 ( 866 kB)
[ 0.000000] .bss : 0xc0bee494 - 0xc0d78ff8 (1579 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:800
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution ñ000ns, wraps every 4294967ms
[ $ 2.000568] Cadmbrating`delay hoop... 1=93.93 @ogoMIPS (lpj=9969664)
[ 0.060079] pid_max: default: 32768 minimum: 301
[ 0.060192] Security Framework initialized
[ 0.060278] Mount-cache hash table entries: 512
[ 0.060913] Initializing cgroup subsys debug
[ 0.060923] Initializing cgroup subsys cpuacct
[ 0.060970] Initializing cgroup subsys freezer
[ 0.060977] Initializing cgroup subsys bfqio
[ 0.060984] Initializing cgroup subsys timer_slack
[ 0.061007] CPU: Testing write buffer coherency: ok
[ 0.061218] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.321198] Brought up 4 CPUs
[ 0.321209] SMP: Total of 4 processors activated (7975.73 BogoMIPS).
[ 0.324481] print_constraints: dummy:
[ 0.324674] NET: Registered protocol family 16
[ 0.325436] host1x bus init
[ 0.325501] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.441433] [MISC]: pcbid=0x009e (projectid=0x00)
[ 0.442709] The pingroup KB_ROW0 was configured to RSVD3 instead of <UNKNOWN>
[ 0.443519] grouper_booting_info reg=0
[ 0.443525] grouper_booting_info-normal
[ 0.443926] grouper_edp_init: CPU regulator 6000 mA
[ 0.444079] fiq_debugger_probe: could not install irq handler
[ 0.444096] fiq_debugger: probe of fiq_debugger.0 failed with error -22
[ 0.445175] ram_console: got buffer at beb00000, size 100000
[ 0.445273] ram_console: error in header, 2
[ 0.445281] ram_console: found existing buffer, size 289653, start 289653
[ 1.334583] console [ram-1] enabled
[ 1.461189] [ELAN] Touch dirver register
[ 1.461269] grouper_modem_init
[ 1.461402] Registering gpio keys
[ 1.461812] grouper_camera_init: pmic_id= 0x0
[ 1.461887] mi1040 i2c_register_board_info
[ 1.462088] *** MPU START *** mpuirq_init...
[ 1.462227] *** MPU END *** mpuirq_init...
[ 1.462355]

[C1M7]

[QUOTE]grouper_emc_init:mem_bootstrap_ad4=0 mem_bootstrap_ad5=0
[ 1.462536] tegra: validated EMC DFS table
[ 1.462611] grouper_emc_init: Nakasi_dvfr_ElpidaWtable_0430
[ 1.462763] hw-brea{point: foõnd 6 breakp/int(and 1 watchpoint registebs.
[ * 1.462837] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[ 1.462979] hw-breakpoint: maximum watchpoint size is 4 bytes®
[ 1.463905] tegra_iovmm_regirter: added iovÃ*m)smmu
[ 1.471346] bik: #reate slab <bio-0>$at 0
[ 1.472042] vgaavb: loaded
[ 1.472247] i2c-core: driver [tps6591x] using legacy suspend method
[ 1.472322] i2c-core: driver [tps6591x] using legacy resume method
[ 1.472476] i2c-core: driver [tps80031] using legacy suspend method
[ 1.472549] i2c-core: driver [tps80031] using legacy resume method
[ 1.472722] i2c-core: driver [ricoh583] using legacy suspend method
[ 1.472794] i2c-core: driver [ricoh583] using legacy resume method
[ 1.473163] SCSI subsystem initialized
[ 1.474182] usbcore: registered new interface driver usbfs
[ 1.474384] usbcore: registered new interface driver hub
[ 1.474535] usbcore: registered new device driver usb
[ 1.474741] tegra-otg tegra-otg: otg transceiver registered
[ 1.476615] [MAX77663 probe]:CID4=23!
[ 1.481366] Wake18 for irq=118
[ 1.481501] Enabling wake18
[ 1.483802] print_constraints: max77663_sd0: 600 <--> 3387 mV at 1025 mV normal standby
[ 1.485079] print_constraints: max77663_sd1: 800 <--> 1587 mV at 1200 mV normal standby
[ 1.486297] print_constraints: max77663_sd2: 1800 mV normal standby
[ 1.487617] print_constraints: max77663_sd3: 600 <--> 3387 mV at 1350 mV normal standby
[ 1.488903] print_constraints: max77663_ldo0: 800 <--> 2350 mV at 1000 mV normal standby
[ 1.488994] set_supply: max77663_ldo0: supplied by max77663_sd3
[ 1.490060] print_constraints: max77663_ldo1: 800 <--> 2350 mV at 1200 mV normal standby
[ 1.490209] set_supply: max77663_ldo1: supplied by max77663_sd3
[ 1.491433] print_constraints: max77663_ldo2: 800 <--> 3950 mV at 2800 mV normal standby
[ 1.492711] print_constraints: max77663_ldo3: 800 <--> 3950 mV at 3000 mV normal standby
[ 1.494097] print_constraints: max77663_ldo4: 800 <--> 1587 mV at 1000 mV normal standby
[ 1.495062] print_constraints: max77663Oldo5: 800 <=-> 2800 mV at 2800 eV normal stendby
[ 1.496078] priot_constrAints: max77663_ldo> 800 <--> 3950 mV at 3300 mV normal standby
[ 1.497125] print_constraints: max77663_ldo7: 800 <--> 3950 mV at 1200 mV normal standby
[ 1.497216] set_s5ppdy: eax77663_ldo7: supplied by -ax77663_sd3[ (1>5)8382] prin4_constraints: max77663_ldo8: 8000<--> 3950 mV at 1200 mV normal standby
[ ` 1.498532] pet_supply: max77v63_ldo8: supplied by max77663_3d3
[ ³.498866} max77663 regisver misc dewice for I2C stress test rc=0
[ 1.504142] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 1.504567] Bluetooth: Core ver 2.16
[ 1.504730] NET: Registered protocol family 31
[ 1.504805] Bluetooth: HCI device and connection manager initialized
[ 1.504939] Bluetooth: HCI socket layer initialized
[ 1.505012] Bluetooth: L2CAP socket layer initialized
[ 1.505097] Bluetoth: SCO socket layer initia,ized
[ 1.505486] cfo80211: c!lling CDA ôo update(world regulatory tomain
[' 1.506091] NFC: NFC Core ver 0.1
[ 1.506255] NET: Registered protocol family 39
[ 1.506483] print_constraints: fixed_reg_en_3v3_sys_a01: 3300 mV normal standby
[ 1.506939] print_constraints: fixed_reg_en_avdd_hdmi_usb_a01: 3300 mV normal standby
[ 1.507023] set_supqly: fixed_reg_en_avdd_hdmi_esb_a01: surtlied by fixee_reg_e._3v3_sysßa05
[ $1.507339]8prijt_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
[ 1.507484] set_supply: fixed_reg_en_1v8_cam: supplied by max77663_sd2
[ 1.507757] print_constraints: fixed_reg_en_vddio_vid: 5000 mV normal standby
[ 1.508053] print_constraints: fixed_reg_en_vdd_pnl: 3300 mV normal standby
[ 1.508194] set_supply: fixed_reg_en_vdd_pnl: supplied by fixed_reg_en_3v3_sys_a01
[ 1.508470] print_constraintw: fixed_reg_en_~dd_com: 3300 mV Noreql standcy
[ 5.508615] set_supply: fixed_reg_en_vdd_com: supplied by fyxed_reg_en_3v3

[binkybear]

I do not see any kernel panics. I'm unsure if this was cut off or not, you may want to try posting to pastebin.com next time. But nothing here indicates cause of issue.

[cr1p70]

try this https://forums.kali.org/showthread.php?24474-Nexus-10-Nethunter-freezeing read bottom post as this was an issue with N10 as well.

[binkybear]

cr1p70 and I had a discussion about this on github in case anyone is interested in a follow up: https://github.com/offensive-security/kali-nethunter/issues/176

Creating a swap file seemed to fix memory issue.