View Full Version : How to remote desktop your Nethunter from other linux Desktop

2015-05-03, 19:29
On this toturial i will show you how to create a remote desktop connection from any other computer on your network to your nethunter tablet .

Note : take note of your ip address that will show you when you open nethunter icon on your tablet .

1st step: connect to your wifi and open your Kali nethunter in your tablet and on the left menu select "Kali Laucher"
http://s11.postimg.org/dnnrs2can/kalimenu.jpg (http://postimg.org/image/dnnrs2can/)

Then select "Launch Kali Menu in Terminal"
http://s24.postimg.org/6m1ouv7q9/kalimenu1.jpg (http://postimg.org/image/6m1ouv7q9/)

After that , this menu will open :
http://s17.postimg.org/gd4940ip7/rdesktop.jpg (http://postimg.org/image/gd4940ip7/)

2nd Step : Fist we need to configure a VNC password and desktop settings , for that press 8 on your tablet and "Enter" , and you will enter in the submenu "VNC Setup"

http://s9.postimg.org/vgx36wd7f/rdesktopsetup.jpg (http://postimg.org/image/vgx36wd7f/)

part 1 ........

2015-05-03, 19:30
part 2 ....

Select 1 to configure a password .
Note : Use a 6 characters password , if you are successful with this process then nethunter will ask you to verify the password again .
Many people try "toor" as password , but that dont work .

When you finish this step then you must configure "VNC default resolution" witch is step 2 in VNC setting menu .
Press Enter in all questions and everything will be fine , and you will return to VNC settings menu and then press 0 and "enter" to return to main nethunter menu.

3rd Step : Select Services on the menu and this menu will popup .
http://s2.postimg.org/opvogoqkl/rdesktop2.jpg (http://postimg.org/image/opvogoqkl/)

Select "Start VNC Server" , and your VNC server will start on port 5901 (default) on your current tablet ip address .

4th step : Go to your desktop computer and open a terminal .
type "xtightvncviewer" , if terminal says that program is not found , then you need to install it , and for that you need to write this :

sudo apt-get update
sudo apt-get install xtightvncviewer

After the installation is completed on your linux desktop all you have to do is to write :

xtightvncviewer nethunterip:vncport
(my case was : xtightvncviewer

Note : In case you have for some reason difficulties to know your nethunter ip address then open the terminal and write :
ifconfig , if you are using your wifi then it should be wlan0 , you can ask the ip directly by typing in terminal
ifconfig wlan0 and your ip address should popup next to inet address .

http://s24.postimg.org/7bgccuztt/rdesktop7.jpg (http://postimg.org/image/7bgccuztt/)

xtightvncviewer will ask you for a password , the password is the one you configured in nethunter before .

after that point vnc will popup with your kali remote desktop from your nethunter .
http://s10.postimg.org/ipypr8ko5/rdesktop6.jpg (http://postimg.org/image/ipypr8ko5/)

You can use your desktop mouse and keyboard on your remote desktop nethunter .