Bloodbound696
2017-10-12, 04:44
Current situation: User-name and password not working to login into Kali Linux
Version: Kali Linux 2017.2 -iso-64Bit - https://www.kali.org/downloads/
Hardware and software scenario: Dual booted with a Mac OSX
Current abilities: I can fully go into my OSX operating system or to the GNU GRUB and the Kali Linux login screen.
So let me try to make this simple and easy to understand, I cannot login into Kali Linux. For some reason, the username and password I put did not function as promised. For the record: yes i have tried "root" as the user-name and "toor" and the password- that also did not work. I went all over the internet and have seen if not all the youtube videos of the "Reset kali linux username and password tutorials" and even on some fourms but they did not help due to a minor detail.. I noticed all the tutorials were pretty much the same, Go into your GNU GRUB in your kali linux, Here you have two options " *Kali GNU/Linux " and " Advanced options for Kali GNU/Linux " select Advanced options, and now you have another two options " *Kali GNU/Linux, with Linux 4.12.0-kali1-amd64 " and " Kali GNU/Linux, with Linux 4.12.0-kali1-amd64 (recovery mode) " next to press the " E " key and on what it seems to be the recovery mode option, and you get this code I will show you in this next image.
2815
Now the next steps was to change code in this page which was to change where it says " ro " to " rw " and then at the end of that same line you add " init=/bin/bash " which then you hit the " F10 " key to boot, which then I should have recieved this prompt. - will demonstrate in the next image.
2816
But this was not possible for me because i noticed something.. The code/script/program to be run... was not the same on my page as what the tutorial had shown, this goes for every tutorial i found btw... This is because this is what my page looked like, Keep in mind what im about to show you is the GNU GRUB for the recovery mode option i had press the " E " key on.
The vertical and horizonal symbols represent the box surrounding the code, to show you exactly what the code looked like for me and the red " . " represent the space
GNU GRUB version 2.02-2
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
|setparams 'Kali GNU/Linux, with Linux 4.12.0-kali1-amd64 (recovery mode)'
|...............load_video
|...............insmod gzio
|...............if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
|...............insmod part_gpt
|...............insmod ext2
|...............set root='hd0,gpt5'
|...............if [ x$feature_platform_search_hint =xy ]; then
|.................search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 c7949d41-4d4f-4002-af4d-1d294c763c1e
|...............else
|.................search --no-floppy --fs-uuid --set=root c7949d41-4d4f-4002-af4d-1d294c763c1e
|................fi
|................echo 'Loading Linux 4.12.0-kali1-amd64 ...'
|................linux /boot/vmlinuz-4.12.0-kali1-amd64 root=UUID=c7949d41-4d4f-4002-1d294c763c1e ro single
|................echo 'Loading initial ramdisk ...'
|................initrd /boot/initrd.img-4.12.0-kali1-amd64
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
So its because of this I dont know what to do, except ask you guys as a fourm to help me out on this. fustrated :/
Version: Kali Linux 2017.2 -iso-64Bit - https://www.kali.org/downloads/
Hardware and software scenario: Dual booted with a Mac OSX
Current abilities: I can fully go into my OSX operating system or to the GNU GRUB and the Kali Linux login screen.
So let me try to make this simple and easy to understand, I cannot login into Kali Linux. For some reason, the username and password I put did not function as promised. For the record: yes i have tried "root" as the user-name and "toor" and the password- that also did not work. I went all over the internet and have seen if not all the youtube videos of the "Reset kali linux username and password tutorials" and even on some fourms but they did not help due to a minor detail.. I noticed all the tutorials were pretty much the same, Go into your GNU GRUB in your kali linux, Here you have two options " *Kali GNU/Linux " and " Advanced options for Kali GNU/Linux " select Advanced options, and now you have another two options " *Kali GNU/Linux, with Linux 4.12.0-kali1-amd64 " and " Kali GNU/Linux, with Linux 4.12.0-kali1-amd64 (recovery mode) " next to press the " E " key and on what it seems to be the recovery mode option, and you get this code I will show you in this next image.
2815
Now the next steps was to change code in this page which was to change where it says " ro " to " rw " and then at the end of that same line you add " init=/bin/bash " which then you hit the " F10 " key to boot, which then I should have recieved this prompt. - will demonstrate in the next image.
2816
But this was not possible for me because i noticed something.. The code/script/program to be run... was not the same on my page as what the tutorial had shown, this goes for every tutorial i found btw... This is because this is what my page looked like, Keep in mind what im about to show you is the GNU GRUB for the recovery mode option i had press the " E " key on.
The vertical and horizonal symbols represent the box surrounding the code, to show you exactly what the code looked like for me and the red " . " represent the space
GNU GRUB version 2.02-2
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
|setparams 'Kali GNU/Linux, with Linux 4.12.0-kali1-amd64 (recovery mode)'
|...............load_video
|...............insmod gzio
|...............if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
|...............insmod part_gpt
|...............insmod ext2
|...............set root='hd0,gpt5'
|...............if [ x$feature_platform_search_hint =xy ]; then
|.................search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5 c7949d41-4d4f-4002-af4d-1d294c763c1e
|...............else
|.................search --no-floppy --fs-uuid --set=root c7949d41-4d4f-4002-af4d-1d294c763c1e
|................fi
|................echo 'Loading Linux 4.12.0-kali1-amd64 ...'
|................linux /boot/vmlinuz-4.12.0-kali1-amd64 root=UUID=c7949d41-4d4f-4002-1d294c763c1e ro single
|................echo 'Loading initial ramdisk ...'
|................initrd /boot/initrd.img-4.12.0-kali1-amd64
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
So its because of this I dont know what to do, except ask you guys as a fourm to help me out on this. fustrated :/