enshem
2018-03-13, 17:31
Hello guys i installed the latest version of Kali Linux 32bit (2018.1) on USB persistence
i run it mostly with my laptop
and i have Alfa AWUS036NH wireless card and its not appear when i use the command
its detect only the chipset of my laptop the builtin wireless card
airmon-ng i see
PHY Interface Driver Chipset
phy0 wlan0 ath9k Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
any chance that i can do something about it?
i cant find driver for it i did some research and its said that this card no need driver for Linux and should work without any problem
maybe because i use in laptop it do not recognize it?
when i used it on VMware back then it worked great
ifconfig :
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.8 netmask 255.255.255.0 broadcast 10.0.0.255
inet6 fe80::9cb5:132f:6d16:4916 prefixlen 64 scopeid 0x20<link>
ether 18:31:bf:71:39:f5 txqueuelen 1000 (Ethernet)
RX packets 32981 bytes 43967718 (41.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20741 bytes 1677612 (1.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 27 bytes 1389 (1.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 27 bytes 1389 (1.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
i run it mostly with my laptop
and i have Alfa AWUS036NH wireless card and its not appear when i use the command
its detect only the chipset of my laptop the builtin wireless card
airmon-ng i see
PHY Interface Driver Chipset
phy0 wlan0 ath9k Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
any chance that i can do something about it?
i cant find driver for it i did some research and its said that this card no need driver for Linux and should work without any problem
maybe because i use in laptop it do not recognize it?
when i used it on VMware back then it worked great
ifconfig :
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.8 netmask 255.255.255.0 broadcast 10.0.0.255
inet6 fe80::9cb5:132f:6d16:4916 prefixlen 64 scopeid 0x20<link>
ether 18:31:bf:71:39:f5 txqueuelen 1000 (Ethernet)
RX packets 32981 bytes 43967718 (41.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20741 bytes 1677612 (1.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 27 bytes 1389 (1.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 27 bytes 1389 (1.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0