Morning Folks.

Nvidia 4070TI

I have Kali installed on a separate Drive, The install went fine, but upon boot, There was an error Unknown Chipset.
So I booted into Recovery, Disabled Nouveau, and installed the Nvidia Drivers from the .run along with Kernel-Headers.
Upon boot I do not get the message, but I do get a black screen, I am also unable to change tty.

If I boot into Recovery Mode, Nouveau isnt loaded and Nvidia is, and it all runs fine. Any ideas where to look for this issue?

Code:
crc_t10dif             16384  1 t10_pi
aesni_intel           360448  0
drm                   802816  17 gpu_sched,drm_kms_helper,drm_exec,drm_suballoc_helper,drm_display_helper,nvidia,drm_buddy,amdgpu,drm_ttm_helper,nvidia_drm,ttm,amdxcp
crct10dif_generic      12288  0
usbcore               405504  6 xhci_hcd,usbhid,usb_storage,btusb,xhci_pci,uas
mdio_devres            12288  1 r8169
scsi_mod              331776  5 sd_mod,usb_storage,uas,libata,sg
crypto_simd            16384  1 aesni_intel
crct10dif_pclmul       12288  1
crc64                  16384  2 crc64_rocksoft,crc64_rocksoft_generic
libphy                237568  3 r8169,mdio_devres,realtek
cryptd                 28672  2 crypto_simd,ghash_clmulni_intel
i2c_piix4              32768  0
video                  77824  3 asus_wmi,amdgpu,nvidia_modeset
scsi_common            16384  6 scsi_mod,sd_mod,usb_storage,uas,libata,sg
usb_common             20480  2 xhci_hcd,usbcore
crct10dif_common       12288  3 crct10dif_generic,crc_t10dif,crct10dif_pclmul
gpio_amdpt             16384  0
wmi                    40960  3 video,asus_wmi,wmi_bmof
gpio_generic           20480  1 gpio_amdpt
button                 24576  0

Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=1280x720,1280x800,auto
  load_video
  insmod gfxterm
fi
terminal_output gfxterm
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
insmod gfxmenu
insmod png
set theme=($root)/boot/grub/themes/kali/theme.txt
export theme
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=5
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_gpt
insmod ext2
search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
insmod png
if background_image /usr/share/grub/themes/kali/grub-16x9.png; then
  set color_normal=white/black
  set color_highlight=black/white
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
        set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Kali GNU/Linux' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
        load_video
        insmod gzio
        if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
        insmod part_gpt
        insmod ext2
        search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
        echo    'Loading Linux 6.6.9-amd64 ...'
        linux   /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro  quiet splash
        echo    'Loading initial ramdisk ...'
        initrd  /boot/initrd.img-6.6.9-amd64
}
submenu 'Advanced options for Kali GNU/Linux' $menuentry_id_option 'gnulinux-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
        menuentry 'Kali GNU/Linux, with Linux 6.6.9-amd64' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.6.9-amd64-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
                load_video
                insmod gzio
                if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
                insmod part_gpt
                insmod ext2
                search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
                echo    'Loading Linux 6.6.9-amd64 ...'
                linux   /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro  quiet splash
                echo    'Loading initial ramdisk ...'
                initrd  /boot/initrd.img-6.6.9-amd64
        }
        menuentry 'Kali GNU/Linux, with Linux 6.6.9-amd64 (recovery mode)' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.6.9-amd64-recovery-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
                load_video
                insmod gzio
                if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
                insmod part_gpt
                insmod ext2
                search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
                echo    'Loading Linux 6.6.9-amd64 ...'
                linux   /boot/vmlinuz-6.6.9-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro single 
                echo    'Loading initial ramdisk ...'
                initrd  /boot/initrd.img-6.6.9-amd64
        }
        menuentry 'Kali GNU/Linux, with Linux 6.5.0-kali3-amd64' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.5.0-kali3-amd64-advanced-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
                load_video
                insmod gzio
                if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
                insmod part_gpt
                insmod ext2
                search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
                echo    'Loading Linux 6.5.0-kali3-amd64 ...'
                linux   /boot/vmlinuz-6.5.0-kali3-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro  quiet splash
                echo    'Loading initial ramdisk ...'
                initrd  /boot/initrd.img-6.5.0-kali3-amd64
        }
        menuentry 'Kali GNU/Linux, with Linux 6.5.0-kali3-amd64 (recovery mode)' --class kali --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.5.0-kali3-amd64-recovery-4c71f4ae-c160-491e-a522-dc879a9b56ce' {
                load_video
                insmod gzio
                if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
                insmod part_gpt
                insmod ext2
                search --no-floppy --fs-uuid --set=root 4c71f4ae-c160-491e-a522-dc879a9b56ce
                echo    'Loading Linux 6.5.0-kali3-amd64 ...'
                linux   /boot/vmlinuz-6.5.0-kali3-amd64 root=UUID=4c71f4ae-c160-491e-a522-dc879a9b56ce ro single 
                echo    'Loading initial ramdisk ...'
                initrd  /boot/initrd.img-6.5.0-kali3-amd64
        }
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/nvme0n1p1)' --class windows --class os $menuentry_id_option 'osprober-efi-B46E-697F' {
        insmod part_gpt
        insmod fat
        search --no-floppy --fs-uuid --set=root B46E-697F
        chainloader /efi/Microsoft/Boot/bootmgfw.efi
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'UEFI Firmware Settings' $menuentry_id_option 'uefi-firmware' {
        fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg
fi
### END /etc/grub.d/41_custom ###