Results 1 to 1 of 1

Thread: DHCP issues on network connection

  1. #1
    Join Date
    2015-Jun
    Posts
    1

    DHCP issues on network connection

    *Dual Boot WIN8.1 with Kali*

    No DHCP offers received (when /etc/networks/interfaces is : auto eth0; iface eth0 inet dhcp
    I have tried both managed and un-managed through network manager
    I have also tried static IP: auto eth0; iface eth0 inet static; address 192.168.0.19; netmask 255.255.255.0; gateway 192.168.0.1; network 192.168.0.0; broadcast 192.168.0.255
    I have done: route add default gw 192.168.0.1 and verified with route -n

    It will either not work statically nor with DHCP.

    I have also tried commenting out the " r34323..." or whatever line in the dhclient.conf as well tried the send vendor-class-indentifier "MSFT 5.0".

    My home router is set up for DHCP, but will work if I do static. My last open IP is .20. I prefer to have DHCP working so that when I travel, I dont always have to reassign a new IP every time.

    *Edit*

    I have tred multiple drivers ( Realtek for my GA-990FXA-UD3) I did a msinfo32.exe while on win to verify what version I needed. I tried 2 drivers dwnld from Realtek for Linux for my version. The first didn't take and the second established a wired connection (not notification only) I was still unable to receive any dhcp offers or establish a static connection. I have also tried the settings in my router.

    Does anyone have this MB and fixed this issue?

    Thanks for the help

    ChuchTesta
    Last edited by chucktesta; 2015-06-23 at 02:53. Reason: Update

Similar Threads

  1. Broadcom BCM43228 wireless network card having issues with connection
    By caliban in forum TroubleShooting Archive
    Replies: 4
    Last Post: 2019-01-16, 13:21
  2. Internet connection Issues no network drivers wired & wireless
    By Ahvaz in forum TroubleShooting Archive
    Replies: 2
    Last Post: 2013-09-13, 20:40
  3. Your Network is probably not using the DHCP protocol.
    By rox21 in forum Installing Archive
    Replies: 3
    Last Post: 2013-09-09, 07:30

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •