Results 1 to 4 of 4

Thread: Installing Kali with RAID 0

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    2016-Feb
    Posts
    4

    Installing Kali with RAID 0

    During the installation it asks for iscsi login along with connection address to the iscsi disks so I am stuck at this point of installation, Can anyone give me some information on how I can get the information to the iscsi disks so I can finish the install? I have two 500GB HDDs configured as a RAID 0. Any help is much appreciated. Sorry if this is a repost I could not find the last one I posted

  2. #2
    Join Date
    2015-Jul
    Location
    /home/duxim
    Posts
    408
    in my opinion when you install any system with configured raid the better approach is to disable raid,
    then install system and from that point configure raid again.
    Repetitio est mater studiorum

  3. #3
    Join Date
    2016-Feb
    Posts
    4
    Thanks...I did what you said even though i was reluctant at first but it worked. I just disabled the raid then installed windows on one disk and linux on the other and used EasyBCD for the bootloader and now everything works fine

  4. #4
    Join Date
    2015-Jul
    Location
    /home/duxim
    Posts
    408
    sometimes is good to accept another advice.
    glad to make it

    Cheers
    duxim
    Repetitio est mater studiorum

Similar Threads

  1. How do you do a new install Kali onto a new RAID-0?
    By madrat in forum Installing Archive
    Replies: 0
    Last Post: 2021-02-02, 01:03
  2. Installing Kali Linux On RAID 0 (DUAL BOOT)
    By varundbest in forum Installing Archive
    Replies: 0
    Last Post: 2014-01-22, 11:28
  3. Installing Kali on Hardware Raid (5)
    By Lupinia in forum Installing Archive
    Replies: 0
    Last Post: 2013-05-28, 08:19
  4. Install Kali on Raid 0
    By MEgray in forum Installing Archive
    Replies: 0
    Last Post: 2013-03-28, 18:57

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •