Results 1 to 5 of 5

Thread: After fresh install, I get error "Unfortunately, Nethunter has stopped"

  1. #1
    Join Date
    2013-Mar
    Posts
    8

    After fresh install, I get error "Unfortunately, Nethunter has stopped"

    I've been using https://github.com/offensive-security/nethunter-LRT in an attempt to install Nethunter 3 on a Nexus 10. Every time the install completes, I only get the error "Unfortunately, Nethunter has stopped"

    I've gone through the steps multiple times. Nethunter 2 was working on this Nexus 10 previously.

    I've tried the first release of Android 5.1.1 (LMY47V) and the latest release (LMY49J) with the same results.

    Does anyone have an idea of something else I should try?

    Thanks

  2. #2
    Join Date
    2013-May
    Posts
    21
    hi, pls put full output of every LRT script

  3. #3
    Join Date
    2013-Mar
    Posts
    8
    Here you go:

    ~/nethunter-LRT on master
    $ ./stockNexusFlash.sh
    NETHUNTER LINUX FLASH (STOCK NEXUS GOOGLE IMAGES)

    NOTE: THIS WILL FACTORY RESET THE DEVICE (15 secs to cancel using 'ctrl + c')

    CHECKING PRE-REQUISITES

    Checking if adb is installed
    adb FOUND
    Checking if adb is installed DONE

    Checking if fastboot is installed
    fastboot FOUND
    Checking if fastboot is installed DONE

    Adb connection check
    ADB device detected.
    Adb connection check DONE

    Checking if tar is installed
    tar FOUND
    Checking if tar is installed DONE

    Checking stock image existence
    Dir stockImage/ has files
    Checking stock rom existence DONE

    CHECKING PRE-REQUISITES DONE

    Creating tmp dir _extracted
    Creating tmp dir _extracted DONE

    Extracting stockImage/mantaray-lmy47v-factory-91a865a6.tgz
    x mantaray-lmy47v/
    x mantaray-lmy47v/bootloader-manta-mantamf01.img
    x mantaray-lmy47v/image-mantaray-lmy47v.zip
    x mantaray-lmy47v/flash-all.bat
    x mantaray-lmy47v/flash-all.sh
    x mantaray-lmy47v/flash-base.sh
    EXTACTING stockImage/mantaray-lmy47v-factory-91a865a6.tgz DONE

    cd to _extracted
    cd to _extracted DONE

    Rebooting into bootloader
    Rebooting into bootloader DONE

    Flasing Stock Rom
    !!!! DONT UNPLUG THE DEVICE !!!!
    < waiting for any device >
    erasing 'boot'...
    OKAY [ 0.024s]
    finished. total time: 0.025s
    ******** Did you mean to fastboot format this partition?
    erasing 'cache'...
    OKAY [ 0.103s]
    finished. total time: 0.103s
    erasing 'recovery'...
    OKAY [ 0.029s]
    finished. total time: 0.029s
    ******** Did you mean to fastboot format this partition?
    erasing 'system'...
    OKAY [ 0.449s]
    finished. total time: 0.449s
    ******** Did you mean to fastboot format this partition?
    erasing 'userdata'...
    OKAY [ 0.428s]
    finished. total time: 0.428s
    sending 'bootloader' (1280 KB)...
    OKAY [ 0.170s]
    writing 'bootloader'...
    OKAY [ 0.108s]
    finished. total time: 0.278s
    rebooting into bootloader...
    OKAY [ 0.001s]
    finished. total time: 0.001s
    < waiting for any device >
    archive does not contain 'boot.sig'
    archive does not contain 'recovery.sig'
    archive does not contain 'system.sig'
    archive does not contain 'vendor.img'
    Creating filesystem with parameters:
    Size: 29783752704
    Block size: 4096
    Blocks per group: 32768
    Inodes per group: 8192
    Inode size: 256
    Journal blocks: 32768
    Label:
    Blocks: 7271424
    Block groups: 222
    Reserved block group size: 1024
    Created filesystem with 11/1818624 inodes and 158176/7271424 blocks
    Creating filesystem with parameters:
    Size: 553648128
    Block size: 4096
    Blocks per group: 32768
    Inodes per group: 6768
    Inode size: 256
    Journal blocks: 2112
    Label:
    Blocks: 135168
    Block groups: 5
    Reserved block group size: 39
    Created filesystem with 11/33840 inodes and 4363/135168 blocks
    --------------------------------------------
    Bootloader Version...: MANTAMF01
    Baseband Version.....: no modem
    Serial Number........: R32--------
    --------------------------------------------
    checking product...
    OKAY [ 0.001s]
    checking version-bootloader...
    OKAY [ 0.001s]
    sending 'boot' (4930 KB)...
    OKAY [ 0.643s]
    writing 'boot'...
    OKAY [ 0.126s]
    sending 'recovery' (5496 KB)...
    OKAY [ 0.727s]
    writing 'recovery'...
    OKAY [ 0.126s]
    erasing 'system'...
    OKAY [ 0.153s]
    sending 'system' (656838 KB)...
    OKAY [ 85.937s]
    writing 'system'...
    OKAY [ 16.275s]
    erasing 'userdata'...
    OKAY [ 0.367s]
    sending 'userdata' (139141 KB)...
    OKAY [ 18.192s]
    writing 'userdata'...
    OKAY [ 3.541s]
    erasing 'cache'...
    OKAY [ 0.095s]
    sending 'cache' (10372 KB)...
    OKAY [ 1.358s]
    writing 'cache'...
    OKAY [ 0.280s]
    rebooting...

    finished. total time: 127.830s
    Flasing Stock Rom DONE

    Deleting tmp dir _extracted
    Deleting _extracted DONE

    The device should be rebooting, once it is booted,
    do the initial setup, enable developer options and USB debugging again.

    Next step is flashing TWRP && superSU && Kali Nethunter using twrpFlash.sh script


    ~/nethunter-LRT on master
    $ ./twrpFlash.sh
    NETHUNTER LINUX FLASH (TWRP, SuperSU and Kali Nethunter)

    CHECKING PRE-REQUISITES

    Checking if adb is installed
    adb FOUND
    Checking if adb is installed DONE

    Checking if fastboot is installed
    fastboot FOUND
    Checking if fastboot is installed DONE

    Adb connection check
    ADB device detected.
    Adb connection check DONE

    Checking TWRP image existence
    Dir twrpImage/ has files
    Checking TWRP image existence DONE

    Checking SuperSu existence
    Dir superSu/ has files
    Checking SuperSu existence DONE

    Checking Kali Nethunter zip existence
    Dir kaliNethunter/ has files
    Checking Kali Nethunter zip existence DONE

    CHECKING PRE-REQUISITES DONE

    Sending Kali Nethunter zip to the device
    Transferring: 684614479/684614479 (100%)
    7566 KB/s (684614479 bytes in 88.354s)
    Sending Kali Nethunter zip to the device DONE

    Sending SuperSu zip to the device
    Transferring: 4288330/4288330 (100%)
    5785 KB/s (4288330 bytes in 0.723s)
    Sending SuperSu zip to the device DONE

    Rebooting into bootloader
    Rebooting into bootloader DONE

    Flashing TWRP image
    < waiting for any device >
    sending 'recovery' (9296 KB)...
    OKAY [ 1.212s]
    writing 'recovery'...
    OKAY [ 0.201s]
    finished. total time: 1.413s
    Flashing TWRP image DONE

    Booting into TWRP (20 secs dont worry)
    downloading 'boot.img'...
    OKAY [ 1.213s]
    booting...
    OKAY [ 0.513s]
    finished. total time: 1.726s
    Booting into TWRP DONE

    Installing SuperSU
    Installing zip file '/sdcard/supersu.zip'
    Checking for MD5 file...
    Skipping MD5 check: no MD5 file found

    *****************
    SuperSU installer
    *****************
    - Mounting /system, /data and rootfs
    - Extracting files
    - System mode
    - Disabling OTA survival
    - Removing old files
    - Creating space
    - Placing files
    - Restoring files
    - Post-installation script
    - Unmounting /system
    - Done !
    Done processing script file
    Installing SuperSU DONE!

    Installing Kali Linux Nethunter
    Installing zip file '/sdcard/kaliNethunter.zip'
    Checking for MD5 file...
    Skipping MD5 check: no MD5 file found

    Starting AROMA INSTALLER version 3.00
    (c) 2013-2015 by amarullz.com

    AROMA INSTALLER Finished...

    Done processing script file
    Installing Kali Linux Nethunter DONE!
    Rebooting into Kali Linux Nethunter
    error: no devices found
    Everything is installed. Phone should be booting up! Enjoy

  4. #4
    Join Date
    2016-May
    Posts
    1
    Have the same issue too. Has anyone found a solution? TIA

  5. #5
    Join Date
    2013-Mar
    Posts
    8
    @pr0xc

    I also wrote up an issue here: https://github.com/offensive-securit...-LRT/issues/13

    If you add your platform and such, we might get more traction on this issue.

Similar Threads

  1. Replies: 2
    Last Post: 2023-09-02, 03:25
  2. Kali NetHunter on S22 ultra VNC server ERROR "Help Please"
    By $CashTagLimited in forum General Archive
    Replies: 1
    Last Post: 2023-01-23, 01:31
  3. Please Introduce "Termux" instead of "NetHunter Terminal" !!!
    By mrdatta in forum NetHunter Suggestions
    Replies: 3
    Last Post: 2021-04-18, 21:08
  4. Replies: 0
    Last Post: 2014-10-12, 06:56

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •