On my HP laptop, I am having issues connecting via ethernet.
lspci -vnn:
ifconfig eth0:Code:00:02.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: b4000000-b5ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff Capabilities: [40] Subsystem: NVIDIA Corporation C51 PCI Express Bridge [10de:0000] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:03.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 25 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: b6000000-b7ffffff Capabilities: [40] Subsystem: NVIDIA Corporation C51 PCI Express Bridge [10de:0000] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:09.0 RAM memory [0500]: NVIDIA Corporation MCP51 Host Bridge [10de:0270] (rev a2) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- 00:0a.0 ISA bridge [0601]: NVIDIA Corporation MCP51 LPC Bridge [10de:0260] (rev a3) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at 1d00 [size=128] 00:0d.0 IDE interface [0101]: NVIDIA Corporation MCP51 IDE [10de:0265] (rev f1) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) I/O ports at 3080 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd, ata_generic 00:0e.0 IDE interface [0101]: NVIDIA Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1) (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 30c0 [size=8] I/O ports at 30b4 [size=4] I/O ports at 30b8 [size=8] I/O ports at 30b0 [size=4] I/O ports at 3090 [size=16] Memory at b0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv Kernel modules: sata_nv, ata_generic 00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64 Memory behind bridge: b8000000-b80fffff Capabilities: [b8] Subsystem: Device [0000:0000] Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269] (rev a3) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at b0008000 (32-bit, non-prefetchable) [size=4K] I/O ports at 30e0 [size=8] Capabilities: [44] Power Management version 2 Kernel driver in use: forcedeth Kernel modules: forcedeth 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Flags: fast devsel 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Flags: fast devsel Kernel modules: amd64_edac_mod 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) Subsystem: Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller [103c:1374] Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at b6000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 22-bf-73-ff-ff-60-00-1a Capabilities: [16c] Power Budgeting <?> Kernel driver in use: b43-pci-bridge Kernel modules: ssb
iwconfig:Code:eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::84:ad63:d0b3:41c3 prefixlen 64 scopeid 0x20<link> ether 00:1b:24:57:f5:e6 txqueuelen 1000 (Ethernet) RX packets 17 bytes 5250 (5.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 99 bytes 16962 (16.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
dmesg | grep b43:Code:lo no wireless extensions. eth0 no wireless extensions.
Code:[ 8.862146] b43-phy0: Broadcom 4311 WLAN found (core revision 13) [ 8.892049] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9 [ 8.892072] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0 [ 8.937461] b43 ssb0:0: firmware: direct-loading firmware b43/ucode13.fw [ 8.947793] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0initvals13.fw [ 8.955485] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0bsinitvals13.fw [ 16.644056] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Originally Posted by grid
