Results 1 to 2 of 2

Thread: Raspberry pi4 + 3.5 Waveshare lcd Can't make it work

  1. #1
    Join Date
    2020-May
    Posts
    1

    Exclamation Raspberry pi4 + 3.5 Waveshare lcd Can't make it work

    Hi Everyone
    First of all im sorry for my bad english, im learning.
    Im working on a kali project with a parspberrypi4 and a 3.5 TFT Waveshade inch lcd V.B
    https://ibb.co/F41C6Wr
    in future id?like to add an internal battery and buy a allin1 bluetooth mouse and keyboard.
    If you know of some project like that you can suggest me important sources.
    for the moment im using ssh connection only. because im not able to get working in other way
    I?ve bought a raspberrypi4 and a 3.5 inch lcd but i cannot make it working together.
    i?ve tried a lot of images Kali 2020.2, 2019.3 and the last StickyFingers-Kali-Pi-armh https://whitedome.com.au/re4son/sticky- ? led-image/) that seems to work but i cannot find a proper way.

    I know im doing something wrong because before applying settings to the rp4 i put the lcd on the board.
    that?s because im not able to get the board working form start with the lcd installed on it? 🙄 🙄

    I commonly flash the image into the sd
    put inside the raspberry
    open ssh connecction
    followed the guide i?ve posted before
    i?ve also setup my lcd with
    Code: Select all

    kalipi-tft-config
    (Waveshade lcd 3.5 (B)) trought the setup menu.
    and when i press reboot command like in all the case i?ve tried the raspberry is refusing ssh connection and the lcd stays black. 😳

    Then need to remove the lcd to get again an ssh connection, or flash a new image.
    Followed a lot of video and guides, but none of this works

    I know i am so noob and first-experience user with raspberry world. Fresh registred im asking your help if someone have arleady installed a kali version using
    a rpi4 with that lcd, im looking for a kali image working with that lcd.
    Can you raccomand a good tft ldc working with pi4 and kali?

    Is normal that my rp4 is refusing ssh connection while the lcd is on? Do you sugget to return the lcd and buy another model??

  2. #2
    Join Date
    2020-Aug
    Location
    Colombia
    Posts
    1

    Raspberry pi4 3 5 Waveshare lcd Cant make it work

    vc4-fkms-v3d overlay is required by OpenAuto Pro. It cannot be removed.It is also default parameter for the Raspberry PI. That looks like your LCD is not fully compatible with Raspberry PI.

Similar Threads

  1. Replies: 0
    Last Post: 2021-04-18, 21:49
  2. Using a waveshare 3.5 touch screen with the raspberry pi
    By makeitjustin in forum ARM Archive
    Replies: 7
    Last Post: 2017-04-09, 00:51
  3. Raspberry PI B+ with WaveShare SpotPear 3.2 LCD
    By Scarecrow01 in forum ARM Archive
    Replies: 2
    Last Post: 2015-09-25, 03:02

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •