Hey guys, so I'm new to Kali Linux and want to study it and I have followed some tutorials and stuff to learn about it. I'm having a problem with the command 'airodump-ng' as it's not showing any results at all no matter how many times I've tried it.
I use a Ralink RT5370 adapter and to my knowledge,it supports packet injection and Kali Linux 2020 on VirtualBox
I've already done the following steps:
-->apt-get update,upgrade,dist-upgrade
--->apt-get install firmware-ralink
-->changed the USB Controller to 3.0 and tried
-->tried it on a fresh install of kali and on a 2018.3 version
-->airmon-ng check kill
-->tried enabling monitor mode using other methods
I'm able to enable monitor mode and everything works perfectly. Can you tell me how to fix this please?
Here's a screenshot of the output: https://ibb.co/Fm6kfH9
Here's the code:
Code:
root@kali:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 fe80::a00:27ff:fe3a:e47c prefixlen 64 scopeid 0x20<link>
ether 08:00:27:3a:e4:7c txqueuelen 1000 (Ethernet)
RX packets 4 bytes 930 (930.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 39 bytes 3216 (3.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 24 bytes 1356 (1.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 24 bytes 1356 (1.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 2e:1a:7c:c1:20:9f txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
root@kali:~# ifconfig wlan0 down
root@kali:~# airmon-ng check kill
Killing these processes:
PID Name
1496 wpa_supplicant
root@kali:~# iwconfig wlan0 mode monitor
root@kali:~# ifconfig wlan0 up
root@kali:~# iwconfig
wlan0 IEEE 802.11 Mode:Monitor Frequency:2.412 GHz Tx-Power=20 dBm
Retry short long limit:2 RTS thr:off Fragment thr:off
Power Management:off
eth0 no wireless extensions.
lo no wireless extensions.
root@kali:~# airodump-ng wlan0