Hi guys,

I am using Kali Linux 2020.4 installed on a new RPi4 (8GB). This RPi is not scanning 5GHz networks as some higher channels are not being displayed. My 5GHz network is operating on the channel 149 and I do not see this being listed here:

wlan0 32 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 34 : 5.17 GHz
Channel 36 : 5.18 GHz
Channel 38 : 5.19 GHz
Channel 40 : 5.2 GHz
Channel 42 : 5.21 GHz
Channel 44 : 5.22 GHz
Channel 46 : 5.23 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Channel 100 : 5.5 GHz
Channel 104 : 5.52 GHz
Channel 108 : 5.54 GHz
Channel 112 : 5.56 GHz
Channel 116 : 5.58 GHz
Channel 120 : 5.6 GHz
Channel 124 : 5.62 GHz
Current Frequency:2.442 GHz (Channel 7)


kali@kali:~$ sudo iw reg get
[sudo] password for kali:
global
country IN: DFS-UNSET
(2402 - 2482 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 30), (N/A)
(5250 - 5350 @ 80), (N/A, 24), (N/A)
(5470 - 5725 @ 160), (N/A, 24), (N/A)
(5725 - 5875 @ 80), (N/A, 30), (N/A)



I have tried to set the country using `iw reg set` and even through `raspi-config` however, despite trying these methods, the country seems to be hardcoded on the same and there's no change. How do I enable some higher channels on this Pi?

Some additional details:
kali@kali:~$ vcgencmd version
Apr 27 2020 14:33:37
Copyright (c) 2012 Broadcom
version 3a8f1793b758d6fb7f375edaa260e069ecd34c88 (clean) (release) (start)

kali@kali:~$ uname -a
Linux kali 4.19.118-Re4son-v8l+ #1 SMP PREEMPT Thu May 7 02:54:03 UTC 2020 aarch64 GNU/Linux