Nexus 7 hangs in boot after rooting the device

I follow the guide and after rooting, it hangs on the four circles at the start, does someone know what to do?

Thanks in advance

same problem here ...

Have you tried the installer ? Make sure you are flashing the right version of image on your device.

I had the same issue, Nexus 2013 (Wi-Fi) hung at boot!
I was using the correct FW and everything, it seems to not like my Tablet.
Booting to the recovery the system reported weird errors like no space remaining on device, and unable to find system folders etc!

Here is the fix! for this issue, seems to be related to the installed android version!

Go download the original firmware for yout tablet from: https://developers.google.com/android/nexus/images

I specifically used this version (2013 Wi-Fi): https://dl.google.com/dl/android/aos...y-4f77b811.tgz

Once downloaded extract it.

cd into the directory razor-jss15q

There is a script in there called flash-all.sh, ignore it and do the following:

Press power up and volume down to start your tablet to boot into recovery.

On kali run the following:

nexus-fastboot flash bootloader bootloader-flo-flo-03.14.img

The console should echo:

sending 'bootloader' (3911 KB)...
OKAY [ 0.169s]
writing 'bootloader'...
OKAY [ 1.313s]
finished. total time: 1.483s

Then do:

nexus-fastboot -w update image-razor-jss15q.zip

The console will echo:

archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: FLO-03.14
Baseband Version.....: none
Serial Number........: xxxxxxxx
--------------------------------------------
checking product...
OKAY [ 0.003s]
checking version-bootloader...
OKAY [ 0.013s]
sending 'boot' (6880 KB)...
OKAY [ 0.284s]
writing 'boot'...
OKAY [ 0.237s]
sending 'recovery' (7424 KB)...
OKAY [ 0.303s]
writing 'recovery'...
OKAY [ 0.285s]
erasing 'system'...
OKAY [ 0.163s]
sending 'system' (603355 KB)...
OKAY [ 30.199s]
writing 'system'...
OKAY [ 25.890s]
erasing 'userdata'...
OKAY [ 2.793s]
formatting 'userdata' partition...
Creating filesystem with parameters:
Size: 28521246720
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 6963195
Block groups: 213
Reserved block group size: 1024
Created filesystem with 11/1741488 inodes and 153337/6963195 blocks
sending 'userdata' (139065 KB)...
writing 'userdata'...
OKAY [ 13.057s]
erasing 'cache'...
OKAY [ 0.076s]
formatting 'cache' partition...
Creating filesystem with parameters:
Size: 587202560
Block size: 4096
Blocks per group: 32768
Inodes per group: 7168
Inode size: 256
Journal blocks: 2240
Label:
Blocks: 143360
Block groups: 5
Reserved block group size: 39
Created filesystem with 11/35840 inodes and 4616/143360 blocks
sending 'cache' (10984 KB)...
writing 'cache'...
OKAY [ 1.102s]
rebooting...

finished. total time: 74.426s

That's it, let the tablet restart into Android, (you will have to do a bunch of first time setup stuff)

Then repeat the Kali install from scratch. (things seem to be working for me now, just waiting on the kali install to complete.)

Hope this helps folk out who think they just bricked their tablet!

Edit!

If you use the firmware I suggested from the site, Wi-Fi is broken! I have tried this again with the latest image for my Nexus and it is just fine.
Install 4.4.4 (KTU84P for my Nexus Wi-Fi 2013 model) instead, and follow the instructions above!

When you change bootloaders, you will need to 'reload' the bootloader (There is an option on the recovery screen to do this on the nexus) before it will accept the zip you install.

Get your factory firmwares for your Nexus from https://developers.google.com/android/nexus/images

I managed thanks for the help
I just restarted the prose's and it worked

Hi, I have tried and carefully follow your procedure and it turn out to be fine just like the output you have shown above after the command "nexus-fastboot -w update image-razor-jss15q.zip". However when it says rebooting... it stuck up with only a white google logo with a small white padlock below it and it does not boot up in android even after several attempts....PLEASE HELP

originally my nexus 7 2013 wifi hungs on fastboot mode when I did the last part of the prepare when I finished "./root-linux.sh" and stops there. I never seen even the big red android logo....Then when I reboot the nexus it stays in the white google logo and never boots up. So I tried restoring it with plazmatron procedure. It seems to be ok when I tried the procedure but when it reboots. it is the same thing it stuck on the white google logo...Please help how to restore my nexus for me to install the nethunter....

Try my utility I made: https://forums.kali.org/showthread.p...OS-X-and-Linux

Select your device, then select restore to stock. It has a bunch of capabilities, but it automates device recovery.

HI Photonicgeek, I have tried your procedure "Nethunter installer for OS X and Linux" on my kali linux and still the outcome is the same after rebooting it stays on the white google logo with white padlock below it. I hope you can help me....

The echoe output is the following:
######
Kali Flash Utility v1.8.2

Select your device:

[1] Nexus 4 2012 Cellular [Mako] [EXPERIMENTAL]
[2] Nexus 5 2013 Cellular [Hammerhead]
[3] Nexus 7 2012 Wifi [Grouper]
[4] Nexus 7 2012 Cellular [Tilapia]
[5] Nexus 7 2013 Wifi [Flo]
[6] Nexus 7 2013 LTE [Deb]
[7] Nexus 10 2012 Wifi [Manta]

[8] Other Unsupported Device [Use at your own risk. Make a backup]

[Q] Exit

Please make a selection: 5


Kali Flash Utility v1.8.2
Current Device: Nexus 7 2013 Wifi (flo)

Please make a selection:
[1] Install Kali NetHunter [6] Erase device and restore to stock
[2] Unlock Bootloader [7] Delete All Existing Files
[3] Install MultiROM [8] Build Kali (Kali Linux Only)
[4] Remove MultiROM and Secondary ROMs [9] Select A Different Device
[5] Install Additional Tools [10] Update Script

[Q] Exit

Please make a selection: 6


WARNING: THIS WILL DELETE ALL FILES ON YOUR NEXUS DEVICE. DO NOT CONTINUE IF YOU WISH TO
KEEP YOUR FILES.

Press [Enter] to continue, or [Q] to go back


Downloading restore file

################################################## ###################### 100.0%


Unzipping restore file



Please reboot into the bootloader by turning the device off and holding the volume down and
power buttons.

Press [Enter] to continue


Flashing stock ROM


sending 'bootloader' (3911 KB)...
OKAY [ 0.162s]
writing 'bootloader'...
OKAY [ 1.421s]
finished. total time: 1.583s
rebooting into bootloader...
OKAY [ 0.006s]
finished. total time: 0.006s
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: FLO-04.02
Baseband Version.....: none
Serial Number........: 08e9bd19
--------------------------------------------
checking product...
OKAY [ 0.003s]
checking version-bootloader...
OKAY [ 0.004s]
sending 'boot' (7050 KB)...
OKAY [ 0.295s]
writing 'boot'...
OKAY [ 0.412s]
sending 'recovery' (7598 KB)...
OKAY [ 0.304s]
writing 'recovery'...
OKAY [ 0.291s]
sending 'system' (736772 KB)...
OKAY [ 29.229s]
writing 'system'...
OKAY [ 32.476s]
erasing 'userdata'...
OKAY [ 21.572s]
erasing 'cache'...
OKAY [ 0.463s]
rebooting...

finished. total time: 85.068s