BCM4352 + kali-linux-2017.1-amd64 + kali-linux-2017-W20-amd64

downloading kali-linux-2017-W21-amd64 as i type this.

running from a usb stick.

lspci is picking up the bcm4352 device
modprobe shows the b43 driver running.

iwconfig shows nothing.
ifconfig shows no wireless devices.

what i would like is to have this device working out of box with no internet connection.

i have tried:
service networking stop
service networking start
service networking restart

service network-manager stop
service network-manager start
service network-manager restart

im sure i should be able to get this to work with no internet connection with a couple commands.

i know there is tons of howtos on how to get the b43 or compat-wireless or linux drivers going on an "installed kali linux" but i running live usb and im pretty sure its just a couple commands.

thanks

Look at dmesg to see what's going on.

https://pastebin.com/QVYw370g

dmesg most important part
[ 13.747169] bcma: bus0: Found chip with id 0x4352, rev 0x03 and package 0x00
[ 13.761869] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[ 13.763762] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[ 13.767026] bcma: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[ 13.769890] bcma: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[ 13.771795] bcma: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[ 13.810859] bcma: Unsupported SPROM revision: 11
[ 13.812703] bcma: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[ 13.814594] bcma: bus0: Using fallback SPROM failed (err -2)
[ 13.816481] bcma: bus0: No SPROM available
[ 13.824194] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 13.825900] ACPI: Battery Slot [BAT1] (battery present)
[ 13.827560] ACPI: AC Adapter [ACAD] (on-line)
[ 13.835867] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.846902] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 13.849327] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 13.852419] bcma: bus0: Bus registered
[ 13.869907] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 13.871508] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 13.873115] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 13.874741] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 13.876360] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 13.996999] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.066219] dell_laptop: Using dell-rbtn acpi driver for receiving events
[ 14.144267] pstore: using zlib compression
[ 14.199611] pstore: Registered efi as persistent store backend
[ 14.212615] dell_wmi: Detected Dell WMI interface version 0
[ 14.214526] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 14.462809] iTCO_vendor_support: vendor-support=0
[ 14.464087] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.465974] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 14.467155] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.889467] media: Linux media interface: v0.10
[ 15.016586] intel_rapl: Found RAPL domain package
[ 15.016588] intel_rapl: Found RAPL domain core
[ 15.016590] intel_rapl: Found RAPL domain uncore
[ 15.016592] intel_rapl: Found RAPL domain dram
[ 15.016597] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 15.017116] Linux video capture interface: v2.00
[ 15.026612] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 15.026615] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.026617] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 15.026619] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.026620] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.026623] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 15.026625] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 15.026627] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 15.283114] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.310766] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad)
[ 15.352292] uvcvideo 1-1.8:1.0: Entity type for entity Extension 4 was not initialized!
[ 15.354113] uvcvideo 1-1.8:1.0: Entity type for entity Extension 3 was not initialized!
[ 15.355914] uvcvideo 1-1.8:1.0: Entity type for entity Processing 2 was not initialized!
[ 15.357664] uvcvideo 1-1.8:1.0: Entity type for entity Camera 1 was not initialized!
[ 15.359489] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input10
[ 15.361408] usbcore: registered new interface driver uvcvideo
[ 15.363271] USB Video Class driver (1.1.1)
[ 15.503775] Bluetooth: Core ver 2.22
[ 15.505697] NET: Registered protocol family 31
[ 15.507532] Bluetooth: HCI device and connection manager initialized
[ 15.509332] Bluetooth: HCI socket layer initialized
[ 15.511021] Bluetooth: L2CAP socket layer initialized
[ 15.512792] Bluetooth: SCO socket layer initialized
[ 15.576559] usbcore: registered new interface driver btusb
[ 15.583274] Bluetooth: hci0: BCM: chip id 63
[ 15.601276] Bluetooth: hci0: BCM20702A
[ 15.605656] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 15.627566] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0b05-17cf.hcd (-2)
[ 15.628578] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cf.hcd failed with error -2
[ 15.629581] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cf.hcd not found
[ 16.062902] b43-phy0: Broadcom 4352 WLAN found (core revision 42)
[ 16.065090] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
[ 16.066951] b43: probe of bcma0:1 failed with error -95
[ 16.069122] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 16.238878] Netfilter messages via NETLINK v0.30.
[ 17.667131] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.705043] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 17.754486] r8169 0000:01:00.0 eth0: link down
[ 17.754491] r8169 0000:01:00.0 eth0: link down
[ 17.757936] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.922027] r8169 0000:01:00.0 eth0: link up
[ 19.922041] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.627891] fuse init (API version 7.26)
root@kali:~#

ok here is how i did it and i also believe monitor mode is working

i used my dell laptop that has (only) Windows 10 x64 on a single ssd.
i then created kali linux amd 64 week 22 live usb (with persistent partition)
i then booted into kali and did update and upgrade
after that this is the important part if you want broadcom wireless working

apt-get install linux-headers-$(uname -r | sed ‘s,[^-]*-[^-]*-,,’) broadcom-sta-dkms
modprobe -r b44 b43 b43legacy ssb brcmsmac
modprobe wl

now whenever i reboot i still have wifi and monitor mode if needed

i use airmon-ng to create the monitor interface which is called prism0

have fun

if someone would like to tell me if i need to blacklist anything i would appreciate it.
i dont think i do as everything appears to be working but not sure.

thanks