Installing 1.0.6 and 1.0.7 fails.

Hello,

I've tried many possibilities and every install fails..

I'm now trying to install 1.0.6 amd64

I've extracted all iso's with win32 disk imager

Downloaded all iso's from official kali website..

And still I got a failing install

Specs are
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 23
/proc/cpuinfo: model name : Intel(R) Celeron(R) CPU E3300 @ 2.50GHz
/proc/cpuinfo: stepping : 10
/proc/cpuinfo: microcode : 0xa07
/proc/cpuinfo: cpu MHz : 2500.054
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dtherm tpr_shadow vnmi flexpriority
/proc/cpuinfo: cache_alignment : 64
/proc/meminfo: MemTotal: 4058884 kB

I've included all infologs
xorglog http://pastebin.com/kBCwvhKZ
syslog http://pastebin.com/8ThvFhg2
hardware http://pastebin.com/VU52ZLcG

I hope someone can help me out

You said you have extracted the iso with win32 disk imager?.have you create a disk image on a usb flash drive?..also at which stage did the installation failed?..a little more details will be helpful...:)

Quote:

---

Originally Posted by repzeroworld

You said you have extracted the iso with win32 disk imager?.have you create a disk image on a usb flash drive?..also at which stage did the installation failed?..a little more details will be helpful...:)

---

Yes I extracted the iso to an usb flash drive.

It fails at the installation part.. Everything goes well the installation part runs for +- 15 sec and than I get a message with something like an installation step failed, you try to run the failing item again from the menu

now I get an error reading release file that's a new one..

Quote:

---

Originally Posted by Iced

Yes I extracted the iso to an usb flash drive.

It fails at the installation part.. Everything goes well the installation part runs for +- 15 sec and than I get a message with something like an installation step failed, you try to run the failing item again from the menu

now I get an error reading release file that's a new one..

---

hmm..when the pc rebooted it loaded the kali linux image from the usb at startup..you see kali linux main menu?...you select 'graphical installation'?

Quote:

---

Originally Posted by repzeroworld

hmm..when the pc rebooted it loaded the kali linux image from the usb at startup..you see kali linux main menu?...you select 'graphical installation'?

---

I tried both text and graphical installation but with the same result

Quote:

---

Originally Posted by Iced

I tried both text and graphical installation but with the same result

---

it could be that your the iso did not download properly. browse to your kali linux 1.0.6 folder, there should be a file named 'kali-linux-1.0.6-amd64.txt.sha1sum'. open this file and correspond the SHA1SUM digits with the string below

281ddb3d14619a973e254b8f484b7fe27defa822 (this is how mine is)

now go to the link

http://onlinemd5.com/

this link can generate a SHA1SUM hash for your iso file...if the SHA1SUM digits generated are the same as compared to the one in your file..then most likely your file has been downloaded properly
NOTE: ENSURE YOU SELECT SHA1SUM OPTION ON THIS SITE INSTEAD OF MD5!..

if the SHA1SUM digits are the same as compared to the ones in your file...... follow the thread below

https://forums.kali.org/showthread.php?19596-Error-reading-Release-file

probably you can try imaging the iso file on a usb with the program LinuxLive USB Creator
download link

http://www.linuxliveusb.com/

The Installation stops at network check(DHCP) and hngs for both 6 & 7. I have old i3 processor and dell laptop. I went shop and checked 4th Gen i3 processor, it works. no error

Quote:

---

Originally Posted by repzeroworld

it could be that your the iso did not download properly. browse to your kali linux 1.0.6 folder, there should be a file named 'kali-linux-1.0.6-amd64.txt.sha1sum'. open this file and correspond the SHA1SUM digits with the string below

281ddb3d14619a973e254b8f484b7fe27defa822 (this is how mine is)

now go to the link

http://onlinemd5.com/

this link can generate a SHA1SUM hash for your iso file...if the SHA1SUM digits generated are the same as compared to the one in your file..then most likely your file has been downloaded properly
NOTE: ENSURE YOU SELECT SHA1SUM OPTION ON THIS SITE INSTEAD OF MD5!..

if the SHA1SUM digits are the same as compared to the ones in your file...... follow the thread below

https://forums.kali.org/showthread.php?19596-Error-reading-Release-file

probably you can try imaging the iso file on a usb with the program LinuxLive USB Creator
download link

http://www.linuxliveusb.com/

---

I've done all steps the SHA1 is correct

I've used LiLi as usb creator now but I still got

An installation step failed. You can try to run the failing item again from the menu, or skip it and choose something else. The failing step is: Install the system.

I have used an E4500 2.19Ghz CPU which is a much lower model than yours...i do not think it can be a hardware problem...have you tried formating your usb flash before writting the iso or try another flash drive to install the live image? OR TRY SKIPPING THE CONFIGURING TO NETWORK STAGE AND START FROM THE SETTING UP PASSWORD STAGE IN THE INSTALLATION MENU. DISCONNECT ANY NETWORK DEVICE IF NEEDED

To Iced

You may be doing nothing wrong. See our comment in the thread this section

Can not install on Hard Disk kali linux 106/1.07

MTA