I done that with an older version of FrankenScript and still had problems and needed to change things, I might see what I can do after I've completed this version for kali2.0.
Thanks for considering it. The redundancy of having 2 of the same programs is the only way to make FS time proof. That would also prevent you from experiencing 'groundhog days' http://www.imdb.com/title/tt0107048/ Personally I would include everything that FS uses. I do not trust anything they do upstream.
On a different note, do not hesitate to upload/post beta versions so we can start testing the latest monster :cool:
scrip launcher will use aircrack-ng RC1 (mon0) ?
so the scripts that haven't been updated to the new Aircrack-ng RC2 (wlan1mon) will work?
That's the idea when I re-requested script launcher, was to make the defunct scripts work again in post #322 https://forums.kali.org/showthread.p...ll=1#post45168
If the script only accepts that exact format then the answer would be no, I could change it if its a problem?.
I made a mistake in my earlier post, mon1 should be wlan0mon1.
FrankenScript creates the names for the monitor mode interfaces by taking the WiFi interface name (eg: wlan0) and then adding monX to the end of the WiFi device name.
Heres an example:
If you used wlan0 to create 5 monitor mode interfaces the interfaces would be named.
wlan0mon1
wlan0mon2
wlan0mon3
wlan0mon4
wlan0mon5
not a problem at all, it would be however a neat feature to resurrect older scrips that worked well with Aircrack-ng RC1 :)
So anyways let'see what you come up with in the next release!
Hi slim76,
I'm very new to Linux but from my fickle understanding, the new Aircrack-ng calls the monitor device wlan0mon, instead of mon0.
So I'm guessing, older scripts look for instances of monX instead of looking for wlanXmonX.
For example, I tried to use ReVdK3-r1.sh last night running the latest version of Kali Live Persistence.
When asked to enter my monitor device (or words to that effect) it was looking for wlanX, and when I tried entering wlan0, wlan1 or wlan0mon, it kept stating no device could be found.
Going to give your script a go now. Thanks for your effort in creating it.
Regards,
OT
It's a mon0 vs wlan0mon issue where some scripts use the old monitor mode interface of RC1.
Yes. Whether it's only scripts that put the card in monitor mode or all of them is not clear. I stop using Kali shortly after RC2 was introduced. I've read many complaints about scripts not working with RC2. Ignore it if it's not an issue.
Hi,
Are there any versions of Kali Linux live that the current version works with?
Thanks in advance,
OT
If the old scripts enable monitor mode then you could simply swap the new airmon-ng with the old airmon-ng, or you could edit the old script to work with the new version of airmon-ng.
Heres a test version of FrankenScript:
This test version is incomplete at this time, the wep and wps attacks are not yet setup.
wmctrl needs to be installed for FrankenScript to function properly.
I've included a check function to check that wmctrl is installed, if its not installed then FrrankenScript will install it from the archives folder.
Download Link:
----------------------
http://multimirrorupload.com/ib14gyv...Kali2.0.tar.gz
Dling nioooowwwww
:cool:
EDIT1: here is the direct DL link gawd damnit
http://www97.zippyshare.com/d/UaT5eH...Kali2.0.tar.gz
I'm totally lost with this horrible kali 2 interface. How do you install FS and how do you start it?
Kali2.0 isn't that bad dude.
FrankenScript doesn't need to be installed.
Login as root, or open a root terminal if you're logged in as a normal restricted user.
1) Unpack the FrankenScript archive.
2) Look in the unpacked FrankenScript folder for FrankenScript.sh, then drag FrankenScript.sh onto the terminal and press the enter button to start FrankenScript.
Simples :-)
Oh works now. That is what I did but it opens the script in notpad or something. I'm hating this kali.
:cool:Quote:
wmctrl is required but doesn't appear to be installed in Kali.
[1] = Install wmctrl
[q] = Exit FrankenScript
Please choose an option: 1
Selecting previously unselected package wmctrl.
(Reading database ... 323492 files and directories currently installed.)
Preparing to unpack .../wmctrl_1.07-7_i386.deb ...
Unpacking wmctrl (1.07-7) ...
Setting up wmctrl (1.07-7) ...
Processing triggers for man-db (2.7.0.2-5) ...
weeeee Hi Frank!!!! long time no see =]Quote:
########### Main Menu ###########
# #
# [1] = Network Attacks #
# [2] = View Recovered Passkeys #
# [3] = Script Launcher #
# [q] = Exit FrankenScript #
# #
#################################
Please choose an option:
quick observation:
Tryed on 3 diferent wep APs, doesn't work.
PHP Code:
Target list is empty, returning to Scan Results.
[3;J
It's fine here also. There are some problems with the menus, and I wish to show you a pic, but I cannot do graphics on this horrible kali 2.
wait got it now. *geezz not having fun here if it was not clear*Quote:
Detected WiFi Interfaces:
1: wlan0 iwlwifi Intel
2: wlan1 ath9k_htc Atheros
#################################
# #
# [1-2] = Select An Interface To Use # <----- problem here where the text seems too long for the 'box'
# [m] = Return To The Main Menu #
# [q] = Exit FrankenScript #
# #
#################################
Please input an option:
Attachment 916
actually it's the only one.
I saw others but it was the same as in the pic, when lauching a scipt.
Attachment 917
Edit: good job so far Slim :) I really like the [i] (info) option when scaning.
I might have to reinstall on a USB 3.0
KL2 is so slow on a normal USB it's unworkable.
if you can make it a 'portable' install like before, and bring back all the reavers and bully, that would be a good start me thinks.
Script launcher works.
Blimey dude you don't want much do ya!. LOL
You do know that the so-called portable setup wasn't really that portable lol, for it to work you still needed to have the tools installed to kali as well as FrankenScript.
I'm not sure if the portable setup would still work ok with all the updates to kali and the apps, but I guess time will tell.
the way it installed (decompressed) itself was brilliant. I would really like to see that packaging back even if it is not 'portable'.
I hate these f******* ******* ******** ******* links. I have over a TB of Dropbox storage and can add you guys as Users, then you can upload and change the script as much as you want without any ********** spam *** pop-ups. These zippyshare multimirror upload links make me sick.
Edit:
Swearing
yup had to try about 7 times before it gave the right link. We told Slim numerous times, but he persist wanting to use it, so sanely I give up, and just post the direct DL link.
I see that even the direct link trick is not working anymore! :(
Jar, upload it to your account and post the DL link please. I will do the same so we always have many DL sources for others that want to DL it without punching their screen.
Test-FrankenSript-Kali2.0.tar.gz
File size: 58.6 KB
Uploaded: 2015-10-07 16:06:27
http://www.mediafire.com/download/qu...Kali2.0.tar.gz
voila.
FrankenScript V2
https://www.dropbox.com/s/1whikauw99....0.tar.gz?dl=0
Test-FrankenSript-Kali2.0.tar.gz
File size: 58.6 KB
Uploaded: 2015-10-07 16:06:27
Remember if you break it you own it.......
there we go. Can't stop progress :p
Slim, here is an opening for the first post..
FrankenScript, is designed to facilitate wireless network auditing under Linux on WEP and WPA/2 protected access points (APs) by liberating the user from the tedious task of building elaborated command lines, as some of these attacks can be quite complex, saving the Operator time, minimizing inputs and errors. FrankenScript offers a wide spectrum of solutions to attack APs.
Test-FrankenSript-Kali2.0.tar.gz
File size: 58.6 KB
Uploaded: 2015-10-07 16:06:27
http://www.mediafire.com/download/qu...Kali2.0.tar.gz
https://www.dropbox.com/s/1whikauw99....0.tar.gz?dl=0
Cheers matey I'll add it to the front page if I ever manage to get FrankenScript fully up and running.
It looks like I might have to change the monitor mode setup AGAIN as I can't get reaver to work, airodump-ng works ok with the current monitor mode setup but reaver doesn't like it for some reason. :-(
I have a bad feeling that the only way to solve the issue might be to use airmon-ng check kill and lose internet access while performing the attacks, I'll only do that if all else fails.
I'm going to have a play with the old airmon and see how that goes.
yep I believe you. All that because you are working with a dud. KL2.
If FS can restore Internet connection after the attacks, that would be somewhat acceptable, but really, ***.
Cheers buddy. We all know what is going on... ;)
Y'all may wanna check this out also :D https://forums.kali.org/showthread.p...rkManager-conf
:cool: Words of wisdom from above!
I've seen it before but dare not propose it, but seems like kcdtv is on to something there..
I've already blacklisted the interfaces by adding them to /etc/network/interfaces.
The only problem I'm having at the moment is reaver keeps giving me the failed to associate error message, the strange thing is airodump-ng works fine.
I'm sure I'll solve the issue soon, I just need a clear head so I can focus properly.