Overheating Problem

Hi.
I have installed kali-linux in my HP dv6-7070 laptop. everything works fine, but after working with kali-linux for 5 minutes my laptop gets very hot. :(
I installed lm-senors packge,and here is output of "sensors" command:

Code:

acpitz-virtual-0 Adapter: Virtual device temp1: +78.0°C temp2: +78.0°C (crit = +120.0°C) temp3: +30.0°C (crit = +120.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +79.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +70.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +71.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +71.0°C (high = +86.0°C, crit = +100.0°C) nouveau-pci-0100 Adapter: PCI adapter temp1: +64.0°C (high = +95.0°C, crit = +105.0°C)

lspci Command:

Code:

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0a:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

also I have a Windows 7 x64 OS in my laptop, and I don't have any overheating problem in it, except when playing 3D Games.

Well that temp seems quite "usual", I am having around 60°C however my room is quite cold and the window's always open.
What I don't get is "acpitz-virtual-0" how can a Virtual Device have a Temperature? :P

However: Install conky

Code:

apt-get install conky; conky&

and see whatthe Frequency does. I have 1.2GHz at 1% CPU-Usage all the time.
I guess there is the problem: High load requiring high CPU-Freq, unable to control CPU-Freq or CPU doesn't support low freqs (or maybe not configured)

I do not see any overheating numbers in the output, my friend.

try this may be it can help http://forums.kali.org/showthread.ph...p-Mode-in-Kali!

As you play 3D games interestingly, this will be quite informative for you..
http://techwikasta.com/2013/05/evolu...ames-consoles/
Have a look!