upgrading to kali 1.0.5 not working with apt-get dist-upgrade

Printable View

2013-09-19
bahha

upgrading to kali 1.0.5 not working with apt-get dist-upgrade

HI guys

one of the reasons i switched to kali is to be able to upgrade without reinstalling the distro .

I'm trying to upgrade kali to the latest version with these commands

apt-get update && apt-get dist-upgrade

I can see that some of the software are updated when their updates are available . but for the whole distro it doesn't show anything that newly released with it .

for example in the change log of ver 1.0.5 there a GNU radio app in wireless attacks tab . but I can't see it here

when I do lsb_release -a I get this

Code:

Distributor ID: Debian Description: Debian GNU/Linux Kali Linux 1.0 Release: Kali Linux 1.0 Codename: n/a

so apparently after many upgrade I'm still on ver 1.0
I checked the source list it'll normal .
please how can I fix this I looked for a solution enough I didn't get any .
2013-10-02
barry99705

I'm in the same boat.
2013-10-02
russ

try apt-get install kali-linux-full
2013-10-02
Perrin21

Quote:

Originally Posted by russ

try apt-get install kali-linux-full

I Have tried that and it states on latest version, same issue as the OP, says on 1.0
2013-10-02
su_Tron

I've run into this issue as well.

Try adding

Quote:

deb http://http.kali.org/kali kali main contrib non-free

to /etc/apt/sources.list
2013-10-03
maverik35

Check your repos first, make sure they are the ones you need:
deb http://http.kali.org/kali kali main non-free contrib
deb http://security.kali.org/kali-security kali/updates main contrib non-free

Then do this:
aptitude safe-upgrade

It will update, then repeat the process to make sure no new package version came up: aptitude safe-upgrade.

If nothing new, go ahead and do the rest:
aptitude full-upgrade

Then just reboot.

Luck.
2013-10-03
M@rc0

I have the same problem.

So far I have tried everything on this thread and still at version 1.0 in /etc/issue and in lsb_release -a
2013-10-04
Perrin21

Quote:

Originally Posted by maverik35

Check your repos first, make sure they are the ones you need:
deb http://http.kali.org/kali kali main non-free contrib
deb http://security.kali.org/kali-security kali/updates main contrib non-free

Then do this:
aptitude safe-upgrade

It will update, then repeat the process to make sure no new package version came up: aptitude safe-upgrade.

If nothing new, go ahead and do the rest:
aptitude full-upgrade

Then just reboot.

Luck.

I have followed your instructions and i get no packages to install message in terminal. Still says V1.0
2013-10-04
Perrin21

## Security updates
deb http://security.kali.org/kali-security kali/updates main contrib non-free
deb http://http.kali.org/ /wheezy main contrib non-free
deb http://http.kali.org/kali kali-dev main contrib non-free
deb http://http.kali.org/kali kali-dev main/debian-installer
deb-src http://http.kali.org/kali kali-dev main contrib non-free
deb http://http.kali.org/kali kali main contrib non-free
deb http://http.kali.org/kali kali main/debian-installer
deb-src http://http.kali.org/kali kali main contrib non-free
deb http://security.kali.org/kali-security kali/updates main contrib non-free
deb-src http://security.kali.org/kali-security kali/updates main contrib non-free

root@kali:~# aptitude safe-upgrade
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.

root@kali:~# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux Kali Linux 1.0
Release: Kali Linux 1.0
Codename: n/a
2013-10-04
martimarti

that's what I get after following the instructions above:

root@kali:~# aptitude safe-upgrade
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.

root@kali:~# aptitude full-upgrade
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
2013-10-05
maverik35

Quote:

Originally Posted by Perrin21

## Security updates
deb http://security.kali.org/kali-security kali/updates main contrib non-free
deb http://http.kali.org/ /wheezy main contrib non-free
deb http://http.kali.org/kali kali-dev main contrib non-free
deb http://http.kali.org/kali kali-dev main/debian-installer
deb-src http://http.kali.org/kali kali-dev main contrib non-free
deb http://http.kali.org/kali kali main contrib non-free
deb http://http.kali.org/kali kali main/debian-installer
deb-src http://http.kali.org/kali kali main contrib non-free
deb http://security.kali.org/kali-security kali/updates main contrib non-free
deb-src http://security.kali.org/kali-security kali/updates main contrib non-free

root@kali:~# aptitude safe-upgrade
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.

root@kali:~# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux Kali Linux 1.0
Release: Kali Linux 1.0
Codename: n/a

Please read the documantation: http://docs.kali.org/general-use/kal...t-repositories

Read carefully the paragraph in red letters.

I do not know why are you using so many url's. You just need the ones the documantation explains about.
2013-10-09
speakeasy

For whats its worth. I downloaded and install the current version of Kali (kali-linux-1.0.5-emd64.iso) into a VM earlier today.
I did all the normal updates and dist-upgrades, and then did all the commands listed so far in this thread.
I also added all the sources in the main documentation page and included Bleeding Edge sources too.

My lsb_release -a still shows Version 1.0
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux Kali Linux 1.0
Release: Kali Linux 1.0
Codename: n/a
2013-10-10
hausoo

Quote Originally Posted by dookie View Post
The lsb_release information will only be updated for major versions, not minor ones.
Not all of the new tools were added to the default iso as it helps us keep the iso smaller while still having all the core tools. You will need to apt-get the ones you want manually.
2013-10-11
maverik35

As a matter of fact, the kali version is 1.0(5), so I guess the output of lsb_release and the issue command will output version 1.0.

I remember when I upgraded from squeeze to wheezy (stable to testing) and from wheezy to Jessie from (stable to testing), only then the lsb command as well as "cat /etc/issue.net" will output the Testing version as wheezy and jessie accordingly, this is when sid was moved to testing and testing to stable.

So I guess there is nothing wrong with the versions since we all are still working with version 1.0, either is 1.0.5, 1.0.6, 1.0.7, 1.0.x..Still version 1.0.

When Kali release version 2.0, if any, then the commands will output the new version.

By the way, personally, the sensible matter is the content of kali as to packages versions.

Luck.
2013-12-10
OnceRemoved

http://wiki.debian.org/Derivatives/Census/Kali apt-get update
2013-12-11
Quispiam

Great, but still not working :(
How should look correct sources.list file?
2014-02-02
aurora

I feel for everyboyd here. hope I get my problem solved also
2014-02-04
undersc0re

Quote:

Originally Posted by maverik35

As a matter of fact, the kali version is 1.0(5), so I guess the output of lsb_release and the issue command will output version 1.0.

I remember when I upgraded from squeeze to wheezy (stable to testing) and from wheezy to Jessie from (stable to testing), only then the lsb command as well as "cat /etc/issue.net" will output the Testing version as wheezy and jessie accordingly, this is when sid was moved to testing and testing to stable.

So I guess there is nothing wrong with the versions since we all are still working with version 1.0, either is 1.0.5, 1.0.6, 1.0.7, 1.0.x..Still version 1.0.

When Kali release version 2.0, if any, then the commands will output the new version.

By the way, personally, the sensible matter is the content of kali as to packages versions.

Luck.

I upgraded today and immediately after upgrading, I got a good version response. I have not tried after rebooting though.

root@kali:~# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux Kali Linux 1.0.6
Release: Kali Linux 1.0.6
Codename: n/a