Somehow I corrupted my 16gb Is there a way to force the format? Gparted just keeps scanning..... It wont mount. In windows DISKPART wont work. Is there a fix or am I screwed?
Printable View
Somehow I corrupted my 16gb Is there a way to force the format? Gparted just keeps scanning..... It wont mount. In windows DISKPART wont work. Is there a fix or am I screwed?
dmesg data
Code:[ 2859.584154] Sense Key : Not Ready [current]
[ 2859.584156] Info fld=0x0
[ 2859.584157] sd 9:0:0:0: [sde]
[ 2859.584159] Add. Sense: Medium not present
[ 2859.584160] sd 9:0:0:0: [sde] CDB:
[ 2859.584161] Read(10): 28 00 00 00 20 78 00 00 08 00
[ 2859.584165] end_request: I/O error, dev sde, sector 8312
[ 2859.585772] sd 9:0:0:0: [sde] Device not ready
[ 2859.585775] sd 9:0:0:0: [sde]
[ 2859.585776] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2859.585778] sd 9:0:0:0: [sde]
[ 2859.585778] Sense Key : Not Ready [current]
[ 2859.585780] Info fld=0x0
[ 2859.585781] sd 9:0:0:0: [sde]
[ 2859.585783] Add. Sense: Medium not present
[ 2859.585784] sd 9:0:0:0: [sde] CDB:
[ 2859.585785] Read(10): 28 00 00 00 20 10 00 00 08 00
[ 2859.585788] end_request: I/O error, dev sde, sector 8208
[ 2859.585791] Buffer I/O error on device sde1, logical block 2
[ 2859.586476] sd 9:0:0:0: [sde] Test WP failed, assume Write Enabled
[ 2859.587224] sd 9:0:0:0: [sde] Asking for cache data failed
[ 2859.587227] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 2859.590096] sde: detected capacity change from 15920529408 to 0
you could try writing zeros across the entire sdcard with dd in kali: dd if=/dev/zero of=/dev/sdX. make sure your sd card is really sde first. if its physically damaged, you will probably have to circular file it.
Code:root@kali:~# dd if=/dev/zero of=/dev/sde
dd: writing to `/dev/sde': Input/output error
17+0 records in
16+0 records out
8192 bytes (8.2 kB) copied, 8.77837 s, 0.9 kB/s
root@kali:~# dd if=/dev/zero of=/dev/sde
dd: writing to `/dev/sde': Input/output error
9+0 records in
8+0 records out
4096 bytes (4.1 kB) copied, 9.35877 s, 0.4 kB/s
Code:[11452.546075] <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
[11452.546077] sd 9:0:0:0: [sde] CDB:
[11452.546078] Read(10): 28 00 00 00 20 78 00 00 08 00
[11452.546082] end_request: I/O error, dev sde, sector 8312
[11452.546084] quiet_error: 22 callbacks suppressed
[11452.546085] Buffer I/O error on device sde1, logical block 15
[11457.232112] sd 9:0:0:0: [sde] Device not ready
[11457.232115] sd 9:0:0:0: [sde]
[11457.232117] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[11457.232118] sd 9:0:0:0: [sde]
[11457.232119] Sense Key : Not Ready [current]
[11457.232121] Info fld=0x0
[11457.232122] sd 9:0:0:0: [sde]
[11457.232124] <<vendor>> ASC=0xff ASCQ=0xffASC=0xff <<vendor>> ASCQ=0xff
[11457.232126] sd 9:0:0:0: [sde] CDB:
[11457.232127] Read(10): 28 00 00 00 20 18 00 00 08 00
[11457.232131] end_request: I/O error, dev sde, sector 8216
[11457.818638] sd 9:0:0:0: [sde] Test WP failed, assume Write Enabled
[11457.820553] sd 9:0:0:0: [sde] No Caching mode page found
[11457.820556] sd 9:0:0:0: [sde] Assuming drive cache: write through
I'm gonna guess it's screwed.
Give this a shot:
fdisk /dev/sde
Brings you to a the fdisk prompt. D for delete partition. N for new partition, just hit enter to accept the defaults. T to tell what kind of filesystem. Safe to go with fat32, should be code C. Can check with L.
Finish with the W command to write the new partition.
Pop it into your windows box and see what happens. Might ask you to format it.
-- Charonsecurity