No IP for eth0

Printable View

2016-09-29
intvl

No IP for eth0

On my HP laptop, I am having issues connecting via ethernet.

lspci -vnn:

Code:

00:02.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: b4000000-b5ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff Capabilities: [40] Subsystem: NVIDIA Corporation C51 PCI Express Bridge [10de:0000] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:03.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 25 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: b6000000-b7ffffff Capabilities: [40] Subsystem: NVIDIA Corporation C51 PCI Express Bridge [10de:0000] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:09.0 RAM memory [0500]: NVIDIA Corporation MCP51 Host Bridge [10de:0270] (rev a2) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- 00:0a.0 ISA bridge [0601]: NVIDIA Corporation MCP51 LPC Bridge [10de:0260] (rev a3) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at 1d00 [size=128] 00:0d.0 IDE interface [0101]: NVIDIA Corporation MCP51 IDE [10de:0265] (rev f1) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) I/O ports at 3080 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd, ata_generic 00:0e.0 IDE interface [0101]: NVIDIA Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1) (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 30c0 [size=8] I/O ports at 30b4 [size=4] I/O ports at 30b8 [size=8] I/O ports at 30b0 [size=4] I/O ports at 3090 [size=16] Memory at b0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv Kernel modules: sata_nv, ata_generic 00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64 Memory behind bridge: b8000000-b80fffff Capabilities: [b8] Subsystem: Device [0000:0000] Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269] (rev a3) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at b0008000 (32-bit, non-prefetchable) [size=4K] I/O ports at 30e0 [size=8] Capabilities: [44] Power Management version 2 Kernel driver in use: forcedeth Kernel modules: forcedeth 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Flags: fast devsel 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Flags: fast devsel Kernel modules: amd64_edac_mod 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) Subsystem: Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller [103c:1374] Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at b6000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 22-bf-73-ff-ff-60-00-1a Capabilities: [16c] Power Budgeting <?> Kernel driver in use: b43-pci-bridge Kernel modules: ssb

ifconfig eth0:

Code:

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::84:ad63:d0b3:41c3 prefixlen 64 scopeid 0x20<link> ether 00:1b:24:57:f5:e6 txqueuelen 1000 (Ethernet) RX packets 17 bytes 5250 (5.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 99 bytes 16962 (16.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

iwconfig:

Code:

lo no wireless extensions. eth0 no wireless extensions.

dmesg | grep b43:

Code:

[ 8.862146] b43-phy0: Broadcom 4311 WLAN found (core revision 13) [ 8.892049] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 9 [ 8.892072] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0 [ 8.937461] b43 ssb0:0: firmware: direct-loading firmware b43/ucode13.fw [ 8.947793] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0initvals13.fw [ 8.955485] b43 ssb0:0: firmware: direct-loading firmware b43/b0g0bsinitvals13.fw [ 16.644056] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
2016-09-30
grid

From the logs, it looks like Kali sees the device. Are the services network-manager and network running? If you're using DHCP, have you tried dhclient eth0 to see if you get an IP address? Any chance you have a bad cable, or bad port on your switch/router?
2016-09-30
intvl

The services are running. dhclient eth0 hangs. Nothing is returned. The cable and port are working fine. I have no problems connecting using other computers.
2016-09-30
intvl

cat /var/log/syslog

Code:

Sep 30 18:33:39 serv kernel: [24382.335339] forcedeth 0000:00:14.0 eth0: link up Sep 30 18:33:39 serv kernel: [24382.335686] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sep 30 18:33:39 serv NetworkManager[396]: <info> [1475278419.0175] device (eth0): link connected Sep 30 18:33:39 serv NetworkManager[396]: <info> [1475278419.0187] device (eth0): state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1457] keyfile: add connection in-memory (ec23b3bc-654f-4a10-b7f6-3d71ef900a5f,"Auto Ethernet") Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1536] device (eth0): Activation: starting connection 'Auto Ethernet' (ec23b3bc-654f-4a10-b7f6-3d71ef900a5f) Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1562] keyfile: update /etc/NetworkManager/system-connections/Auto Ethernet (ec23b3bc-654f-4a10-b7f6-3d71ef900a5f,"Auto Ethernet") and persist connection Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1580] audit: op="connection-add-activate" uuid="ec23b3bc-654f-4a10-b7f6-3d71ef900a5f" name="Auto Ethernet" pid=766 uid=0 result="success" Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1626] device (eth0): state change: disconnected -> prepare (reason 'none') [30 40 0] Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1751] device (eth0): state change: prepare -> config (reason 'none') [40 50 0] Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1831] device (eth0): state change: config -> ip-config (reason 'none') [50 70 0] Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1856] dhcp4 (eth0): activation: beginning transaction (timeout in 45 seconds) Sep 30 18:33:43 serv NetworkManager[396]: <info> [1475278423.1917] dhcp4 (eth0): dhclient started with pid 3741 Sep 30 18:33:43 serv dhclient[3741]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Sep 30 18:33:51 serv dhclient[3741]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 Sep 30 18:34:01 serv dhclient[3741]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 Sep 30 18:34:13 serv dhclient[3741]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20 Sep 30 18:34:28 serv NetworkManager[396]: <warn> [1475278468.6823] dhcp4 (eth0): request timed out Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.6825] dhcp4 (eth0): state changed unknown -> timeout Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.7153] dhcp4 (eth0): canceled DHCP transaction, DHCP client pid 3741 Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.7154] dhcp4 (eth0): state changed timeout -> done Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.7177] device (eth0): state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] Sep 30 18:34:28 serv NetworkManager[396]: <warn> [1475278468.7199] device (eth0): Activation: failed for connection 'Auto Ethernet' Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.8874] device (eth0): state change: failed -> disconnected (reason 'none') [120 30 0] Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.9090] policy: auto-activating connection 'Auto Ethernet' Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.9144] device (eth0): Activation: starting connection 'Auto Ethernet' (ec23b3bc-654f-4a10-b7f6-3d71ef900a5f) Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.9155] device (eth0): state change: disconnected -> prepare (reason 'none') [30 40 0] Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.9174] device (eth0): state change: prepare -> config (reason 'none') [40 50 0] Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.9215] device (eth0): state change: config -> ip-config (reason 'none') [50 70 0] Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.9228] dhcp4 (eth0): activation: beginning transaction (timeout in 45 seconds) Sep 30 18:34:28 serv NetworkManager[396]: <info> [1475278468.9283] dhcp4 (eth0): dhclient started with pid 3757 Sep 30 18:34:28 serv dhclient[3757]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 Sep 30 18:34:31 serv dhclient[3757]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Sep 30 18:34:35 serv dhclient[3757]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 Sep 30 18:34:40 serv dhclient[3757]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 Sep 30 18:34:48 serv dhclient[3757]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 Sep 30 18:34:59 serv dhclient[3757]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 Sep 30 18:35:13 serv NetworkManager[396]: <warn> [1475278513.6849] dhcp4 (eth0): request timed out Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.6850] dhcp4 (eth0): state changed unknown -> timeout Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7018] dhcp4 (eth0): canceled DHCP transaction, DHCP client pid 3757 Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7020] dhcp4 (eth0): state changed timeout -> done Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7031] device (eth0): state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] Sep 30 18:35:13 serv NetworkManager[396]: <warn> [1475278513.7045] device (eth0): Activation: failed for connection 'Auto Ethernet' Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7084] device (eth0): state change: failed -> disconnected (reason 'none') [120 30 0] Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7277] policy: auto-activating connection 'Auto Ethernet' Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7351] device (eth0): Activation: starting connection 'Auto Ethernet' (ec23b3bc-654f-4a10-b7f6-3d71ef900a5f) Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7375] device (eth0): state change: disconnected -> prepare (reason 'none') [30 40 0] Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7396] device (eth0): state change: prepare -> config (reason 'none') [40 50 0] Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7455] device (eth0): state change: config -> ip-config (reason 'none') [50 70 0] Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7505] dhcp4 (eth0): activation: beginning transaction (timeout in 45 seconds) Sep 30 18:35:13 serv NetworkManager[396]: <info> [1475278513.7587] dhcp4 (eth0): dhclient started with pid 3773 Sep 30 18:35:13 serv dhclient[3773]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Sep 30 18:35:17 serv dhclient[3773]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 Sep 30 18:35:27 serv dhclient[3773]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
2016-10-03
grid

Hmm, can you use Wireshark to sniff packets in promiscuous mode...to verify your LAN card is working? Can you manually set an IP address on the card?
2016-10-05
intvl

Quote:

Originally Posted by grid

Hmm, can you use Wireshark to sniff packets in promiscuous mode...to verify your LAN card is working? Can you manually set an IP address on the card?

I reinstalled the operating system using kali-linux-2016.2-i386.iso (before I was using the light version) and now eth0 is working properly.