Acer CB5-311 Chromebook, Kali ARM no sound after installation
Hi,
I have chromebook Acer CB5-311 arm. I have installed Kali ARM on SD cards as it is in the instruction:
https://docs.kali.org/kali-on-arm/ka...-chromebook-13
everything is fine but there is one trouble: absolutely no sound (speakers and headphones too). I' ve searched for some informations and I've checked it by command:
and this is what I got:
Code:
pacmd list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.platform-sound.8.stereo-fallback>
driver: <module-alsa-card.c>
flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9000
volume: front-left: 48211 / 74% / -8.00 dB, front-right: 48211 / 74% / -8.00 dB
balance 0.00
base volume: 58409 / 89% / -3.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 185.76 ms
card: 0 <alsa_card.platform-sound.8>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "Playback HiFi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "NVIDIA Tegra Venice2"
alsa.long_card_name = "NVIDIA Tegra Venice2"
alsa.driver_name = "snd_soc_tegra_max98090"
device.bus_path = "platform-sound.8"
sysfs.path = "/devices/soc0/sound.8/sound/card1"
device.form_factor = "internal"
device.string = "hw:1"
device.buffering.buffer_size = "32768"
device.buffering.fragment_size = "4096"
device.access_mode = "mmap+timer"
device.profile.name = "stereo-fallback"
device.profile.description = "Stereo"
device.description = "Built-in Audio Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-headphones>
and for:
Code:
systemctl --user status pulseaudio
Code:
ines 1-15/15 (END)...skipping...
● pulseaudio.service - Sound Service
Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; vendor preset: enable
Drop-In: /usr/lib/systemd/user/pulseaudio.service.d
└─kali_pulseaudio.conf
Active: active (running) since Tue 2019-09-03 16:46:47 UTC; 34min ago
Main PID: 579 (pulseaudio)
CGroup: /user.slice/user-1000.slice/[email protected]/pulseaudio.service
└─579 /usr/bin/pulseaudio --daemonize=no
Sep 03 16:46:45 kali systemd[563]: Starting Sound Service...
Sep 03 16:46:46 kali pulseaudio[579]: E: [pulseaudio] shm.c: shared memfd open() failed: Fu
Sep 03 16:46:46 kali pulseaudio[579]: W: [pulseaudio] core.c: Failed to allocate shared mem
Sep 03 16:46:47 kali pulseaudio[579]: E: [pulseaudio] module-alsa-card.c: Failed to find a
Sep 03 16:46:47 kali pulseaudio[579]: E: [pulseaudio] module.c: Failed to load module "modu
Sep 03 16:46:47 kali systemd[563]: Started Sound Service.
I do not know that to do. Could please help me?
