How to upgrade the kernel on the Raspberry pi

Hello,
I've noticed that "apt update" and "apt upgrade" never update the kernel on the raspberry pi. I guess this is by design, am I correct? I've tried installing the linux-image-armmp and I get a nice new kernel, but the raspberry always boots with the old kernel (by the way, I have to manually mount /boot before installing this package, otherwise apt happily copies the new kernel into /boot the mountpoint, instead of /boot the FAT partition). I've tried renaming the new kernel file into kernel7.img (I have a rpi 3), but all I get is an unbootable pi.
Are there some docs on how to upgrade the kernel on kali for the raspberry pi? I've done quite a bit of googling but couldn't find anything.

Thanks,
Silla

Hi there! You must use the "rpi-update" to update kernel and modules mister :) If not installed, "apt-cache search rpi-update"

Hello,
thanks for your answer, but rpi-update is nowhere to be found. I think that is a raspbian command.

Regards,
Silla

hello, have you try dist-upgrade instead of upgrade ?

Yes, still no joy.

Try this:

Quote:

---

sudo curl -L --output /usr/bin/rpi-update https://raw.githubusercontent.com/He...ter/rpi-update && sudo chmod +x /usr/bin/rpi-update

---

Then:

Quote:

---

sudo rpi-update

---

In my case it works:
Attachment 2228

Quote:

---

Originally Posted by martinii

Try this:


Then:


In my case it works:
Attachment 2228

---

Did this, everything downloaded, told me to reboot.. still at 4.1 is there something im missing? /boot shows the update is there but still no actual update

Why don't you use my kernel?

https://whitedome.com.au/re4son/re4son-kernel/

i think i figured it out..

before running rpi-update and I had to mount boot

mount /dev/mmcblk0p1 /boot

running now, will report back if it works

Quote:

---

Originally Posted by re4son

Why don't you use my kernel?

https://whitedome.com.au/re4son/re4son-kernel/

---

i'm looking for wifi divers for my Archer T2UH dual band USB dongle.. does your kernel support it?

Quote:

---

Originally Posted by drarkanex

i'm looking for wifi divers for my Archer T2UH dual band USB dongle.. does your kernel support it?

---

It does but you still need the drivers.
I've just compiled them on my pi without any problems but I cannot test it without the adapter.

Why don't you give this a try:

Install my kernel from here: https://whitedome.com.au/re4son/re4son-kernel/
download, compile and install the drivers:

Code:

---

cd /usr/local/src
git clone https://github.com/Myria-de/mt7610u_wifi_sta_v3002_dpo_20130916.git
cd mt7610u_wifi_sta_v3002_dpo_20130916
make
sudo make install

---

This all works on my test bed.
I've read to continue with the following, but haven't tested it:

Code:

---

sudo make install
sudo mkdir /etc/RT2870STA  ##This should probably read: "sudo mkdir /etc/Wireless/RT2870STA/"
sudo cp RT2870STA.dat  /etc/Wireless/RT2870STA/RT2870STA.dat

---

You probale want to copy the directory "mt7610u_wifi_sta_v3002_dpo_20130916" away so you can easily reinstall the drivers if you have to.

Please let us know how you go.

Same driver I've been using. The driver is from 2013 and when I compile it as a module and load it, no monitor mode and when I unplug the adapter, it locks up the kernel tight and I have to reboot.