2x GTX780 and Pyrit doesnt work, helpme please!

Printable View

2014-07-27
Privateer

2x GTX780 and Pyrit doesnt work, helpme please!

Hello friends,
since 1.5 weeks now I'm trying in vain to install already pyrite Supports with Cuda. To my Configuration:

Kali Linux 1.0.8
CPU Intel 4770k
2x EVGA GTX 780 Hydro Copper
Board Gigabyte GA-Z97X-SOC Force
16 GB Ram

Ursrpünglich it was the Kali version 1.0.7, but I have updated it with apt-get distr-upgrade.
Then I have the nvidia driver installed (I think it also has to function properly, as it appears in the applications as "NVIDIA X Server Settings".

When I enter the following commands in the terminal, the following issues appear

Code:

lspci | grep -i vga 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1004 (rev a1)

Code:

root@kai:~/pyrit-0.4.0# pyrit list_cores ERROR: could not insert 'nvidia_uvm': Invalid argument Pyrit 0.4.0 (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com This code is distributed under the GNU General Public License v3+ The following cores seem available... #1: 'CPU-Core (SSE2)' #2: 'CPU-Core (SSE2)' #3: 'CPU-Core (SSE2)' #4: 'CPU-Core (SSE2)' #5: 'CPU-Core (SSE2)' #6: 'CPU-Core (SSE2)' #7: 'CPU-Core (SSE2)' #8: 'CPU-Core (SSE2)'

Code:

root@kai:~/pyrit-0.4.0# nvcc --version nvcc: NVIDIA (R) Cuda compiler driver Copyright (c) 2005-2012 NVIDIA Corporation Built on Fri_Sep_21_17:28:58_PDT_2012 Cuda compilation tools, release 5.0, V0.2.1221

Could you please help me in this matter because I'm very puzzled what I could do yet? If you think it makes the most sense again to reinstall the operating system, then that's no problem for me!

I should mention that currently only 1x GTX 780 is installed and the second card the next week which will only be installed ....
2014-07-29
staticn0de

You have installed a very old version of CUDA. Having not seen the NVIDIA version you are using, i'm going to hazard a guess its around the 331.XX version. That does not work out of the box with CUDA. This error gives it away:

ERROR: could not insert 'nvidia_uvm': Invalid argument

When you see the above error appear, run the command:

Code:

dmesg

Do you see errors about symbols?

Or you could download some newer drivers and get CUDA 6.0.

Failing that, search for blackmoreops has he has written a guide on installing NVIDA which is very good.
2014-08-02
Privateer

Thank you for answer!

I have formated my old system and installed the new Kali Version, with the new Nvidia Driver and Cuda.
After the Install i write the full Package in my Repositories /etc/apt/sources.list from this site http://kaligr3y.blogspot.ie/2013/04/...ali-linux.html

Now i would like to install the GPU and stopped with etc/init.d/gdm3 stop and i startet the chmod +x NVIDIA-Linux-x86_64-340.24 and ./NVIDIA-Linux-x86_64-340.24
I accepted the EULA, and now come an Error Message, my Kernel is not okay and i can look in the logfile

Code:

GNU nano 2.2.6 Datei: nvidia-installer.log nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Sat Aug 2 01:35:33 2014 installer version: 340.24 PATH: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin nvidia-installer command line: ./nvidia-installer Using: nvidia-installer ncurses user interface -> The file '/tmp/.X0-lock' exists and appears to contain the process ID '3977'$ ERROR: You appear to be running an X server; please exit X before installing. $ ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer$

Then i go step by step with this tutorial http://www.blackmoreops.com/2014/06/...le-cuda-pyrit/

By Line Step 4: Install CPyrit-cuda

Code:

root@kali:~/cpyrit-cuda-0.4.0# python setup.py build The CUDA compiler and headers required to build kernel were not found. Trying to continue anyway... svn: ».« ist keine Arbeitskopie running build running build_ext /bin/sh: 1: nvcc: not found None Failed to execute command 'nvcc -V' Traceback (most recent call last): File "setup.py", line 175, in <module> setup(**setup_args) File "/usr/lib/python2.7/distutils/core.py", line 151, in setup dist.run_commands() File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands self.run_command(cmd) File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command cmd_obj.run() File "/usr/lib/python2.7/distutils/command/build.py", line 128, in run self.run_command(cmd_name) File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command self.distribution.run_command(command) File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command cmd_obj.run() File "setup.py", line 82, in run raise SystemError("Nvidia's CUDA-compiler 'nvcc' can't be " \ SystemError: Nvidia's CUDA-compiler 'nvcc' can't be found. root@kali:~/cpyrit-cuda-0.4.0#
2014-08-02
Privateer

dmesg is to big so i can’t post here

Code:

root@kali:~# dmesg [ 0.000000] CPU0 microcode updated early to revision 0x1a, date = 2014-05-23 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14-kali1-amd64 ([email protected]) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.14.5-1kali1 (2014-06-07) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.14-kali1-amd64 root=/dev/mapper/kali-root ro initrd=/install/initrd.gz quiet [ 0.000000] e820: BIOS-provided physical RAM [ 0.699464] ohci-pci 0000:03:04.0: new USB bus registered, assigned bus number 5 [ 0.699465] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.699467] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 6 [ 0.699490] ohci-pci 0000:03:04.0: irq 18, io mem 0xf7202000 [ 0.699623] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.699625] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.699626] usb usb6: Product: xHCI Host Controller [ 0.699626] usb usb6: Manufacturer: Linux 3.14-kali1-amd64 xhci_hcd [ 0.699627] usb usb6: SerialNumber: 0000:00:14.0 [ 0.699743] hub 6-0:1.0: USB hub found

Code:

root@kali:~# lspci 00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x4 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Device 8cb1 00:16.0 Communication controller: Intel Corporation Device 8cba 00:1a.0 USB controller: Intel Corporation Device 8cad 00:1b.0 Audio device: Intel Corporation Device 8ca0 00:1c.0 PCI bridge: Intel Corporation Device 8c90 (rev d0) 00:1c.2 PCI bridge: Intel Corporation Device 8c94 (rev d0) 00:1c.3 PCI bridge: Intel Corporation Device 8c96 (rev d0) 00:1d.0 USB controller: Intel Corporation Device 8ca6 00:1f.0 ISA bridge: Intel Corporation Device 8cc4 00:1f.2 SATA controller: Intel Corporation Device 8c82 00:1f.3 SMBus: Intel Corporation Device 8ca2 01:00.0 VGA compatible controller: NVIDIA Corporation GK110 [GeForce GTX 780] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GK110 HDMI Audio (rev a1) 02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) 03:04.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) 03:04.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) 03:04.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04) 05:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41) 07:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 10) root@kali:~#
2014-08-05
staticn0de

Hey there,

The nvcc not found is likely that cuda has not been added to $path.

Run 'find / - name nvcc' and note where nvcc is. Add this path to your bashrc file. Make sure the libraries are also added. The steps you need are included in a how to I wrote on these forums. You don't need the bumblebee stuff but can follow the cuda components.

As for dmesg, just the tail end is fine