Alfa AWUS036NH not usable when i connect it

Hello guys i installed the latest version of Kali Linux 32bit (2018.1) on USB persistence
i run it mostly with my laptop
and i have Alfa AWUS036NH wireless card and its not appear when i use the command
its detect only the chipset of my laptop the builtin wireless card
airmon-ng i see

PHY Interface Driver Chipset

phy0 wlan0 ath9k Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

any chance that i can do something about it?
i cant find driver for it i did some research and its said that this card no need driver for Linux and should work without any problem
maybe because i use in laptop it do not recognize it?
when i used it on VMware back then it worked great

ifconfig :

Code:

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.0.8 netmask 255.255.255.0 broadcast 10.0.0.255 inet6 fe80::9cb5:132f:6d16:4916 prefixlen 64 scopeid 0x20<link> ether 18:31:bf:71:39:f5 txqueuelen 1000 (Ethernet) RX packets 32981 bytes 43967718 (41.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 20741 bytes 1677612 (1.5 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 27 bytes 1389 (1.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 27 bytes 1389 (1.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lsusb should indicate whether is it plugged or not. Look also in dmesg to see if there is any error about it. Clear dmesg before plugging the card using "dmesg -c" to have only relevant info.

Quote:

Originally Posted by Mister_X

lsusb should indicate whether is it plugged or not. Look also in dmesg to see if there is any error about it. Clear dmesg before plugging the card using "dmesg -c" to have only relevant info.

even when i plug and use dmesg and when i unplug its same

Code:

[ 245.439917] usb 1-4.1: USB disconnect, device number 10 [ 254.880094] usb 1-4.1: new full-speed USB device number 11 using xhci_hcd [ 255.170580] usb 1-4.1: New USB device found, idVendor=0951, idProduct=16a4 [ 255.170594] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 255.170601] usb 1-4.1: Product: HyperX 7.1 Audio [ 255.170608] usb 1-4.1: Manufacturer: Kingston [ 255.170614] usb 1-4.1: SerialNumber: 00000000 [ 255.322279] input: Kingston HyperX 7.1 Audio as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.3/0003:0951:16A4.0009/input/input25 [ 255.380516] hid-generic 0003:0951:16A4.0009: input,hiddev1,hidraw5: USB HID v1.11 Device [Kingston HyperX 7.1 Audio] on usb-0000:00:14.0-4.1/input3