Can Boot Windows 7 after installing Kali Linux
Hi Guys,
I installed Kali Linux with Windows 7. I wanted to dual boot both the operating systems. So I used the option of Grub Loader while installing Kali. When I try to boot Windows 7 a blue screen comes up after booting and the system restarts. Kali runs fine with no issues but Windows 7 is not.
Here are some details that I could extract from Kali Linux.
fdisk -l -u
Code:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xd6f9c10c
Device Boot Start End Blocks Id System
/dev/sda1 63 2047 992+ 42 SFS
Partition 1 does not start on physical sector boundary.
/dev/sda2 2048 206847 102400 42 SFS
/dev/sda3 * 206848 424343551 212068352 42 SFS
/dev/sda4 424343552 534935551 55296000 83 Linux
parted /dev/sda unit s print
Code:
Model: ATA HGST HTS721010A9 (scsi)
Disk /dev/sda: 1953525168s
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 63s 2047s 1985s primary
2 2048s 206847s 204800s primary ntfs
3 206848s 424343551s 424136704s primary ntfs boot
4 424343552s 534935551s 110592000s primary ext4
dd if=/dev/sda of=sda-2by.mbr bs=512 count=1
Code:
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000110032 s, 4.7 MB/s
dd if=/dev/sda of=sda3-2by.pbr bs=512 count=1 skip=1407862784
Code:
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.0161039 s, 31.8 kB/s
Please find the files "sda-2by.mbr" and "sda3-2by.pbr" in the links below:
1st URL:
https://www.dropbox.com/s/xmyxoypo4md3ekn/sda-2by.mbr
https://www.dropbox.com/s/ri5laxqddbme5wd/sda3-2by.pbr
Please help me out guys.
Thanks in advance.
Best Regards
plasma33
