Problem with wireless adapter
Hello, i recently bought a TL-WN725N usb wireless adapter. It works normally on Windows 10, but it has problems on Kali Linux. I'm running Kali through VirtualBox from Windows 10 Host. When i try to connect, it usually lists the networks but doesn't connect (Sometimes it can't find any networks). For like 20-30 seconds it's trying to connect, but then it just stops without any error message. I also installed WICD network manager. WICD could connect several times, but the connection dropped after several seconds.
Kali Version - Kali GNU/Linux Rolling
Kernel - 4.7.0-kali1-amd64
Host OS - Windows 10 Pro (14931)
Wireless Adapter - TL-WN725N
Virtualization Software - VirtualBox 5.1.8
ifconfig
Code:
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.113 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::a00:27ff:feb0:ae56 prefixlen 64 scopeid 0x20<link>
ether 08:00:27:b0:ae:56 txqueuelen 1000 (Ethernet)
RX packets 149 bytes 39832 (38.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 112 bytes 18292 (17.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 8617 bytes 5723908 (5.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8617 bytes 5723908 (5.4 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.112 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::11a8:33fd:7789:a090 prefixlen 64 scopeid 0x20<link>
ether 98:de:d0:15:a2:17 txqueuelen 1000 (Ethernet)
RX packets 144 bytes 52112 (50.8 KiB)
RX errors 0 dropped 761 overruns 0 frame 0
TX packets 109 bytes 7613 (7.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
iwconfig
Code:
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"ZoSo" Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency:2.462 GHz Access Point: C8:3A:35:42:5B:C0
Bit Rate:150 Mb/s Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:****-****-****-****-****-****-****-**** Security mode:open
Power Management:off
Link Quality=81/100 Signal level=-46 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless extensions.
Sometimes i get different output from iwconfig
Code:
eth0 no wireless extensions.
wlan0 unassociated Nickname:"<WIFI@REALTEK>"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless extensions.
More Information:
Internet works fine with bridged adapter of NAT.
