Logitech Mouse only detected 9 from 10 times

1st Time I connected this Mouse to my Notebook running Kali 1904, it worked without problem.
After the next restart it stopped working. 9 reboots later it worked all of a sudden. But only for some hours...
Its a M185 Wireless Mouse.
lsusb isn't showing it, dmesg isn't logging it and reconnecting to different ports doesn't help as well.
Yesterday it worked again and it had this driver assigned: hid-generic

Thx 4ward 4 any help!

All my installed packages:

Code:

ii firmware-ivtv 20190717-2 all Binary firmware for iTVC15-family MPEG codecs (ivtv and pvrusb2 drivers) ii hdmi2usb-fx2-firmware 0.0.0~git20151225-2 all FX2 firmware for hdmi2usb board development ii ixo-usb-jtag 0.0.1-1 all Altera Bus Blaster emulation using Cypress FX2 chip ii libgusb2:amd64 0.3.0-1 amd64 GLib wrapper around libusb1 ii libusb-0.1-4:amd64 2:0.1.12-32 amd64 userspace USB programming library ii libusb-1.0-0:amd64 2:1.0.23-2 amd64 userspace USB programming library ii libusb-1.0-0:i386 2:1.0.23-2 i386 userspace USB programming library ii libusbmuxd6:amd64 2.0.1-2 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library ii python-usb 1.0.2-1 all USB interface for Python ii usb-modeswitch 2.6.0-2 amd64 mode switching tool for controlling "flip flop" USB devices ii usb-modeswitch-data 20191128-2 all mode switching data for usb-modeswitch ii usb.ids 2020.01.09-1 all USB ID Repository ii usbmuxd 1.1.1~git20191130.9af2b12-1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices ii usbutils 1:012-2 amd64 Linux USB utilities

Code:

sudo cat /sys/kernel/debug/usb/devices | grep -E "^([TSPD]:.*|)$" T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 5.04 S: Manufacturer=Linux 5.4.0-kali3-amd64 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.0 T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=8000 Rev= 0.04 T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 9 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 5.04 S: Manufacturer=Linux 5.4.0-kali3-amd64 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0 T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07dc Rev= 0.01 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=2047 ProdID=0855 Rev=11.51 S: Manufacturer=Invensense S: Product=Lenovo Yoga S: SerialNumber=7XYZ... T: Bus=02 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04f3 ProdID=016f Rev= 0.18 S: Manufacturer=ELAN S: Product=Touchscreen T: Bus=02 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bcf ProdID=2c43 Rev= 0.19 S: Manufacturer=J37DBP1NV S: Product=Lenovo EasyCamera T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4 D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev= 5.04 S: Manufacturer=Linux 5.4.0-kali3-amd64 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0

anything in dmesg about the issue?

Like I said, I couldn't find anything suspicious...

dmesg:

Code:

[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2019-02-26 [ 0.000000] Linux version 5.4.0-kali3-amd64 ([email protected]) (gcc version 9.2.1 20200104 (Debian 9.2.1-22)) #1 SMP Debian 5.4.13-1kali1 (2020-01-20) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-kali3-amd64 root=/dev/mapper/Minerva--vg-root ro initrd=/install/gtk/initrd.gz vga=0x0318 splash [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007873ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078740000-0x0000000079b3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079b40000-0x000000009cabefff] usable [ 0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO Kona/Yoga2, BIOS 76CN43WW 03/30/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7F80000000 write-back [ 0.000000] 7 base 025F600000 mask 7FFFE00000 uncachable [ 0.000000] 8 base 025F800000 mask 7FFF800000 uncachable [ 0.000000] 9 base 0260000000 mask 7FE0000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x15f801000, 0x15f801fff] PGTABLE [ 0.000000] BRK [0x15f802000, 0x15f802fff] PGTABLE [ 0.000000] BRK [0x15f803000, 0x15f803fff] PGTABLE [ 0.000000] BRK [0x15f804000, 0x15f804fff] PGTABLE [ 0.000000] BRK [0x15f805000, 0x15f805fff] PGTABLE [ 0.000000] BRK [0x15f806000, 0x15f806fff] PGTABLE [ 0.000000] BRK [0x15f807000, 0x15f807fff] PGTABLE [ 0.000000] BRK [0x15f808000, 0x15f808fff] PGTABLE [ 0.000000] BRK [0x15f809000, 0x15f809fff] PGTABLE [ 0.000000] BRK [0x15f80a000, 0x15f80afff] PGTABLE [ 0.000000] BRK [0x15f80b000, 0x15f80bfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x300b9000-0x34053fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000BC (v01 LENOVO CB-01 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000009CFEB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000009CFDA000 00D141 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000009CFBA000 000040 [ 0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFF0000 00B124 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x000000009CFEE000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: MSDM 0x000000009CFED000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x000000009CFEC000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x000000009CFEA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000009CFE9000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000009CFE8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD7000 002028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x000000009CFD5000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: LPIT 0x000000009CFD4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 0x000000009CFD2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBGP 0x000000009CFD1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCE000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFCD000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFC9000 003496 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFC8000 0007C7 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25f5fb000-0x25f5fffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007873ffff] [ 0.000000] node 0: [mem 0x0000000079b40000-0x000000009cabefff] [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Zeroed struct page in unavailable ranges: 18852 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff] [ 0.000000] On node 0 totalpages: 2075740 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9883 pages used for memmap [ 0.000000] DMA32 zone: 632512 pages, LIFO batch:63 [ 0.000000] Normal zone: 22488 pages used for memmap [ 0.000000] Normal zone: 1439232 pages, LIFO batch:63 [ 0.000000] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x78740000-0x79b3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u262144 [ 0.000000] pcpu-alloc: s178584 r8192 d30312 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2043284 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-kali3-amd64 root=/dev/mapper/Minerva--vg-root ro initrd=/install/gtk/initrd.gz vga=0x0318 splash [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8002052K/8302960K available (10243K kernel code, 1196K rwdata, 3736K rodata, 1668K init, 2056K bss, 300908K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 33931 entries in 133 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 33024, nr_irqs: 760, preallocated irqs: 16 [ 0.000000] random: crng done (trusting CPU's manufacturer) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] printk: console [tty0] enabled [ 0.000000] ACPI: Core revision 20190816 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: PIT calibration matches HPET. 1 loops [ 0.024000] tsc: Detected 2593.895 MHz processor [ 0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2563b4fbe6b, max_idle_ns: 440795330438 ns [ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.79 BogoMIPS (lpj=10375580) [ 0.000014] pid_max: default: 32768 minimum: 301 [ 0.000050] LSM: Security Framework initializing [ 0.000058] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000080] AppArmor: AppArmor initialized [ 0.000083] TOMOYO Linux initialized [ 0.000120] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000137] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000423] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.000439] process: using mwait in idle threads [ 0.000444] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.000446] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.000450] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.000454] Spectre V2 : Mitigation: Full generic retpoline [ 0.000456] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.000459] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.000462] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.000465] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.000468] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.000474] MDS: Mitigation: Clear CPU buffers [ 0.000682] Freeing SMP alternatives memory: 24K [ 0.006679] TSC deadline timer enabled [ 0.006683] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.006797] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.006820] ... version: 3 [ 0.006822] ... bit width: 48 [ 0.006824] ... generic registers: 4 [ 0.006826] ... value mask: 0000ffffffffffff [ 0.006828] ... max period: 00007fffffffffff [ 0.006830] ... fixed-purpose events: 3 [ 0.006832] ... event mask: 000000070000000f [ 0.006871] rcu: Hierarchical SRCU implementation. [ 0.007861] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.007943] smp: Bringing up secondary CPUs ... [ 0.008007] x86: Booting SMP configuration: [ 0.008007] .... node #0, CPUs: #1 [ 0.008007] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.008007] #2 #3 [ 0.009838] smp: Brought up 1 node, 4 CPUs [ 0.009838] smpboot: Max logical packages: 2 [ 0.009838] smpboot: Total of 4 processors activated (20751.16 BogoMIPS) [ 0.012266] devtmpfs: initialized [ 0.012266] x86/mm: Memory block size: 128MB [ 0.012925] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.012925] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.012925] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.012925] pinctrl core: initialized pinctrl subsystem [ 0.012925] NET: Registered protocol family 16 [ 0.012925] audit: initializing netlink subsys (disabled) [ 0.012925] audit: type=2000 audit(1580707226.036:1): state=initialized audit_enabled=0 res=1 [ 0.012925] cpuidle: using governor ladder [ 0.012925] cpuidle: using governor menu [ 0.012925] Simple Boot Flag at 0x44 set to 0x1 [ 0.012925] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.012925] ACPI: bus type PCI registered [ 0.012925] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.012925] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.012925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.012925] PCI: Using configuration type 1 for base access [ 0.012925] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.012925] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.012925] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.012925] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.216282] ACPI: Added _OSI(Module Device) [ 0.216282] ACPI: Added _OSI(Processor Device) [ 0.216282] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.216282] ACPI: Added _OSI(Processor Aggregator Device) [ 0.216282] ACPI: Added _OSI(Linux-Dell-Video) [ 0.216282] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.216282] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.235235] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.237930] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.239159] ACPI: Dynamic OEM Table Load: [ 0.239170] ACPI: SSDT 0xFFFF8950D59D7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.240333] ACPI: Dynamic OEM Table Load: [ 0.240343] ACPI: SSDT 0xFFFF8950D6016000 0005AA (v01 PmRef ApIst 00003000 INTL 20121220) [ 0.241525] ACPI: Dynamic OEM Table Load: [ 0.241533] ACPI: SSDT 0xFFFF8950D5BBEA00 000119 (v01 PmRef ApCst 00003000 INTL 20121220) [ 0.243261] ACPI: EC: EC started [ 0.243265] ACPI: EC: interrupt blocked [ 0.245877] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC [ 0.245881] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.245885] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions [ 0.245887] ACPI: Interpreter enabled [ 0.245928] ACPI: (supports S0 S3 S4 S5) [ 0.245931] ACPI: Using IOAPIC for interrupt routing [ 0.245964] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.246384] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.258589] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.258598] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.259370] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.259374] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.260147] PCI host bridge to bus 0000:00 [ 0.260152] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.260155] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.260158] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.260161] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.260165] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.260177] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.260400] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.260416] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit] [ 0.260424] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.260430] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.260655] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.260668] pci 0000:00:03.0: reg 0x10: [mem 0xb0518000-0xb051bfff 64bit] [ 0.260901] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000 [ 0.260916] pci 0000:00:04.0: reg 0x10: [mem 0xb0510000-0xb0517fff 64bit] [ 0.261193] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.261247] pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit] [ 0.261406] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.261642] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.261699] pci 0000:00:16.0: reg 0x10: [mem 0xb0520000-0xb052001f 64bit] [ 0.261866] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.262120] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.262173] pci 0000:00:1b.0: reg 0x10: [mem 0xb051c000-0xb051ffff 64bit] [ 0.262364] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.262608] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.262859] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.263201] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.263253] pci 0000:00:1d.0: reg 0x10: [mem 0xb0524000-0xb05243ff] [ 0.263454] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.263699] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.264160] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.264206] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.264225] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.264243] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.264262] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.264281] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.264300] pci 0000:00:1f.2: reg 0x24: [mem 0xb0523000-0xb05237ff] [ 0.264399] pci 0000:00:1f.2: PME# supported from D3hot [ 0.264626] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.264672] pci 0000:00:1f.3: reg 0x10: [mem 0xb0521000-0xb05210ff 64bit] [ 0.264725] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.264993] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000 [ 0.265061] pci 0000:00:1f.6: reg 0x10: [mem 0xb0522000-0xb0522fff 64bit] [ 0.265733] pci 0000:01:00.0: [8086:08b2] type 00 class 0x028000 [ 0.265843] pci 0000:01:00.0: reg 0x10: [mem 0xb0400000-0xb0401fff 64bit] [ 0.266241] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.266706] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.266717] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff] [ 0.267964] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.268032] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.268090] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.268146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.268201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.268256] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.268312] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.268367] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.268855] ACPI: EC: interrupt unblocked [ 0.268880] ACPI: EC: event unblocked [ 0.268893] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.268897] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions and events [ 0.268962] iommu: Default domain type: Translated [ 0.268981] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.268981] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.268981] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.268981] vgaarb: loaded [ 0.268981] EDAC MC: Ver: 3.0.0 [ 0.268981] PCI: Using ACPI for IRQ routing [ 0.286747] PCI: pci_cache_line_size set to 64 bytes [ 0.287088] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.287089] e820: reserve RAM buffer [mem 0x78740000-0x7bffffff] [ 0.287090] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff] [ 0.287091] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.287093] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 0.287792] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.287799] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.289038] clocksource: Switched to clocksource tsc-early [ 0.299809] VFS: Disk quotas dquot_6.6.0 [ 0.299832] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.299961] AppArmor: AppArmor Filesystem Enabled [ 0.299980] pnp: PnP ACPI init [ 0.300397] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.300403] system 00:00: [io 0xffff] has been reserved [ 0.300406] system 00:00: [io 0xffff] has been reserved [ 0.300408] system 00:00: [io 0xffff] has been reserved [ 0.300411] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.300414] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.300421] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300468] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.300519] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.300525] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.300555] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.300580] pnp 00:04: Plug and Play ACPI device, IDs SYN2b2c SYN2b00 SYN0002 PNP0f13 (active) [ 0.300722] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.300726] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.300729] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.300732] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.300735] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.300738] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.300741] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.300744] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.300747] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.300750] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved [ 0.300753] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 0.300758] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301098] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301731] pnp: PnP ACPI: found 7 devices [ 0.303052] thermal_sys: Registered thermal governor 'fair_share' [ 0.303052] thermal_sys: Registered thermal governor 'bang_bang' [ 0.303056] thermal_sys: Registered thermal governor 'step_wise' [ 0.303058] thermal_sys: Registered thermal governor 'user_space' [ 0.307580] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.307623] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.307640] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff] [ 0.307659] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.307662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.307665] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.307668] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window] [ 0.307671] pci_bus 0000:01: resource 1 [mem 0xb0400000-0xb04fffff] [ 0.307817] NET: Registered protocol family 2 [ 0.307964] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.307980] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.308067] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.308193] TCP: Hash tables configured (established 65536 bind 65536) [ 0.308227] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.308250] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.308316] NET: Registered protocol family 1 [ 0.308322] NET: Registered protocol family 44 [ 0.308334] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.328130] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x645 took 17594 usecs [ 0.328301] PCI: CLS 64 bytes, default 64 [ 0.328341] Trying to unpack rootfs image as initramfs... [ 1.512665] Freeing initrd memory: 65132K [ 1.512709] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.512716] software IO TLB: mapped [mem 0x98abf000-0x9cabf000] (64MB) [ 1.513257] Initialise system trusted keyrings [ 1.513271] Key type blacklist registered [ 1.513322] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.514748] zbud: loaded [ 1.515013] Platform Keyring initialized [ 1.515018] Key type asymmetric registered [ 1.515020] Asymmetric key parser 'x509' registered [ 1.515028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.515075] io scheduler mq-deadline registered [ 1.515477] pcieport 0000:00:1c.0: PME: Signaling with IRQ 40 [ 1.515633] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.515649] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.515651] vesafb: scrolling: redraw [ 1.515654] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.515673] vesafb: framebuffer at 0xa0000000, mapped to 0x000000002dccced9, using 3072k, total 3072k [ 1.594185] Console: switching to colour frame buffer device 128x48 [ 1.673541] fb0: VESA VGA frame buffer device [ 1.674201] intel_idle: MWAIT substates: 0x11142120 [ 1.674202] intel_idle: v0.4.1 model 0x45 [ 1.674491] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.677160] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.678002] ACPI: Thermal Zone [TZ01] (37 C) [ 1.678892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.680848] Linux agpgart interface v0.103 [ 1.681510] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> [ 1.682500] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 1.683790] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.697286] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.698015] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.698899] mousedev: PS/2 mouse device common for all mice [ 1.699762] rtc_cmos 00:01: RTC can wake from S4 [ 1.700782] rtc_cmos 00:01: registered as rtc0 [ 1.701445] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.702520] intel_pstate: Intel P-state driver initializing [ 1.703586] ledtrig-cpu: registered to indicate activity on CPUs [ 1.706233] drop_monitor: Initializing network drop monitor service [ 1.708783] NET: Registered protocol family 10 [ 1.712891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.725592] Segment Routing with IPv6 [ 1.725946] mip6: Mobile IPv6 [ 1.726220] NET: Registered protocol family 17 [ 1.726745] mpls_gso: MPLS GSO support [ 1.754340] microcode: sig=0x40651, pf=0x40, revision=0x25 [ 1.777051] microcode: Microcode Update Driver: v2.2. [ 1.777054] IPI shorthand broadcast: enabled [ 1.817704] sched_clock: Marking stable (1841685217, -23992017)->(1822081153, -4387953) [ 1.838640] registered taskstats version 1 [ 1.859264] Loading compiled-in X.509 certificates [ 1.910121] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.933261] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 1.954784] zswap: loaded using pool lzo/zbud [ 1.975870] Key type ._fscrypt registered [ 1.996652] Key type .fscrypt registered [ 2.017402] AppArmor: AppArmor sha1 policy hashing enabled [ 2.038846] rtc_cmos 00:01: setting system clock to 2020-02-03T05:20:28 UTC (1580707228) [ 2.061198] Freeing unused kernel image memory: 1668K [ 2.112085] Write protecting the kernel read-only data: 16384k [ 2.153925] Freeing unused kernel image memory: 2036K [ 2.175662] Freeing unused kernel image memory: 360K [ 2.202977] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.224031] x86/mm: Checking user space page tables [ 2.251306] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.272265] Run /init as init process [ 2.434935] button: module verification failed: signature and/or required key missing - tainting kernel [ 2.459141] hidraw: raw HID events driver (C) Jiri Kosina [ 2.482433] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 2.506036] ACPI: Lid Switch [LID0] [ 2.529703] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 2.536021] tsc: Refined TSC clocksource calibration: 2593.994 MHz [ 2.553974] ACPI: Power Button [PWRB] [ 2.577972] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns [ 2.601814] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 2.651392] clocksource: Switched to clocksource tsc [ 2.651437] ACPI: Power Button [PWRF] [ 2.710631] ACPI: bus type USB registered [ 2.710713] SCSI subsystem initialized [ 2.735221] usbcore: registered new interface driver usbfs [ 2.755655] battery: ACPI: Battery Slot [BAT1] (battery present) [ 2.809019] usbcore: registered new interface driver hub [ 2.833672] usbcore: registered new device driver usb [ 2.836191] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 2.882622] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.909351] cryptd: max_cpu_qlen set to 1000 [ 2.934781] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.958722] AVX2 version of gcm_enc/dec engaged. [ 2.960058] libata version 3.00 loaded. [ 2.982615] AES CTR mode by8 optimization enabled [ 3.007106] ehci-pci: EHCI PCI platform driver [ 3.007494] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.055404] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.080760] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 3.105444] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.129859] ahci 0000:00:1f.2: version 3.0 [ 3.130000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.140167] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x2 impl SATA mode [ 3.154552] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.154555] usb usb1: Product: xHCI Host Controller [ 3.179426] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 3.204140] usb usb1: Manufacturer: Linux 5.4.0-kali3-amd64 xhci-hcd [ 3.229033] scsi host0: ahci [ 3.253827] usb usb1: SerialNumber: 0000:00:14.0 [ 3.253951] hub 1-0:1.0: USB hub found [ 3.300308] scsi host1: ahci [ 3.304415] hub 1-0:1.0: 9 ports detected [ 3.329799] ata1: DUMMY [ 3.355799] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.355841] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.355847] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.355867] ehci-pci 0000:00:1d.0: debug port 2 [ 3.359782] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.359796] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0524000 [ 3.378974] ata2: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523180 irq 42 [ 3.380021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.380069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.380070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.380071] usb usb2: Product: EHCI Host Controller [ 3.380072] usb usb2: Manufacturer: Linux 5.4.0-kali3-amd64 ehci_hcd [ 3.380073] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.380280] hub 2-0:1.0: USB hub found [ 3.380285] hub 2-0:1.0: 2 ports detected [ 3.403288] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.403295] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.596616] checking generic (a0000000 300000) vs hw (a0000000 10000000) [ 3.620806] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 3.644870] fb0: switching to inteldrmfb from VESA VGA [ 3.759353] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.780892] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.780894] usb usb3: Product: xHCI Host Controller [ 3.784012] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.824466] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 3.844689] usb usb3: Manufacturer: Linux 5.4.0-kali3-amd64 xhci-hcd [ 3.866846] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded [ 3.866848] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.889420] usb usb3: SerialNumber: 0000:00:14.0 [ 3.912994] hub 2-1:1.0: USB hub found [ 3.933216] ata2.00: NCQ Send/Recv Log not supported [ 3.933338] hub 3-0:1.0: USB hub found [ 3.933354] hub 3-0:1.0: 4 ports detected [ 3.979465] hub 2-1:1.0: 8 ports detected [ 4.002584] ata2.00: ATA-9: SAMSUNG MZMTD512HAGL-000L1, DXT43L0Q, max UDMA/133 [ 4.048678] psmouse serio1: synaptics: queried max coordinates: x [..5702], y [..4730] [ 4.071894] ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.073078] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded [ 4.138390] psmouse serio1: synaptics: queried min coordinates: x [1242..], y [1124..] [ 4.160026] usb usb1-port1: over-current condition [ 4.202588] psmouse serio1: synaptics: Your touchpad (PNP: SYN2b2c SYN2b00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to [email protected]. [ 4.245448] ata2.00: NCQ Send/Recv Log not supported [ 4.362505] Console: switching to colour dummy device 80x25 [ 4.362520] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.363012] ata2.00: configured for UDMA/133 [ 4.363137] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZMTD512 3L0Q PQ: 0 ANSI: 5 [ 4.363720] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.363724] [drm] Driver supports precise vblank timestamp query. [ 4.364369] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.365380] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 4.365396] sd 1:0:0:0: [sda] Write Protect is off [ 4.365401] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.365419] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.393256] sda: sda1 sda2 < sda5 > [ 4.393989] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.399980] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 4.402698] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.403155] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 4.412365] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00/0x0, board id: 2132, fw id: 1180104 [ 4.419223] fbcon: i915drmfb (fb0) is primary device [ 4.467486] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 4.484083] usb usb1-port2: over-current condition [ 4.556261] usb 2-1-port1: over-current condition [ 4.612132] usb 1-4: new full-speed USB device number 2 using xhci_hcd [ 4.761840] usb 1-4: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 4.761845] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.772293] usb 2-1-port2: over-current condition [ 4.892130] usb 1-6: new full-speed USB device number 3 using xhci_hcd [ 5.045369] usb 1-6: New USB device found, idVendor=2047, idProduct=0855, bcdDevice=11.51 [ 5.045374] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.045377] usb 1-6: Product: Lenovo Yoga [ 5.045379] usb 1-6: Manufacturer: Invensense [ 5.045382] usb 1-6: SerialNumber: 192038477124 [ 5.176130] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 5.325946] usb 1-7: New USB device found, idVendor=04f3, idProduct=016f, bcdDevice= 0.18 [ 5.325952] usb 1-7: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 5.325955] usb 1-7: Product: Touchscreen [ 5.325958] usb 1-7: Manufacturer: ELAN [ 5.456132] usb 1-8: new high-speed USB device number 5 using xhci_hcd [ 5.486190] usb 1-8: New USB device found, idVendor=1bcf, idProduct=2c43, bcdDevice= 0.19 [ 5.486195] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.486198] usb 1-8: Product: Lenovo EasyCamera [ 5.486201] usb 1-8: Manufacturer: somenumbas.. [ 5.528750] usbcore: registered new interface driver usbhid [ 5.528753] usbhid: USB HID core driver [ 5.533100] hid-generic 0003:2047:0855.0001: hiddev0,hidraw0: USB HID v1.01 Device [Invensense Lenovo Yoga ] on usb-0000:00:14.0-6/input0 [ 5.533858] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:016F.0002/input/input8 [ 5.533920] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:016F.0002/input/input9 [ 5.533943] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:016F.0002/input/input10 [ 5.534001] hid-generic 0003:04F3:016F.0002: input,hiddev1,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0 [ 5.562810] Console: switching to colour frame buffer device 400x112 [ 5.595367] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 5.832072] device-mapper: uevent: version 1.0.3 [ 5.832135] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected] [ 29.429255] PM: Image not found (code -22) [ 29.657174] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 29.736495] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 29.827386] systemd[1]: Inserted module 'autofs4' [ 29.839320] systemd[1]: systemd 244.1-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 29.856194] systemd[1]: Detected architecture x86-64. [ 29.879487] systemd[1]: Set hostname to <Minerva>. [ 29.979181] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 30.025659] systemd[1]: Created slice system-getty.slice. [ 30.025894] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 30.026092] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 30.026321] systemd[1]: Created slice User and Session Slice. [ 30.026393] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 30.026585] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 30.026650] systemd[1]: Reached target Slices. [ 30.026732] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 30.026830] systemd[1]: Listening on LVM2 poll daemon socket. [ 30.026919] systemd[1]: Listening on Syslog Socket. [ 30.027008] systemd[1]: Listening on fsck to fsckd communication Socket. [ 30.027072] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 30.027234] systemd[1]: Listening on Journal Audit Socket. [ 30.027328] systemd[1]: Listening on Journal Socket (/dev/log). [ 30.027431] systemd[1]: Listening on Journal Socket. [ 30.027531] systemd[1]: Listening on udev Control Socket. [ 30.027613] systemd[1]: Listening on udev Kernel Socket. [ 30.028327] systemd[1]: Mounting Huge Pages File System... [ 30.029068] systemd[1]: Mounting POSIX Message Queue File System... [ 30.030040] systemd[1]: Mounting RPC Pipe File System... [ 30.031092] systemd[1]: Mounting Kernel Debug File System... [ 30.031221] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 30.032272] systemd[1]: Starting Set the console keyboard layout... [ 30.033125] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 30.033746] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 30.033800] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 30.034894] systemd[1]: Starting Journal Service... [ 30.036657] systemd[1]: Starting Load Kernel Modules... [ 30.037704] systemd[1]: Starting Remount Root and Kernel File Systems... [ 30.038880] systemd[1]: Starting udev Coldplug all Devices... [ 30.039854] systemd[1]: Starting Uncomplicated firewall... [ 30.041577] systemd[1]: Mounted Huge Pages File System. [ 30.041809] systemd[1]: Mounted POSIX Message Queue File System. [ 30.042603] systemd[1]: Started Set the console keyboard layout. [ 30.043264] systemd[1]: Started Create list of static device nodes for the current kernel. [ 30.048890] systemd[1]: Mounted Kernel Debug File System. [ 30.053501] systemd[1]: Started Load Kernel Modules. [ 30.053770] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 30.053869] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. [ 30.054663] systemd[1]: Starting Apply Kernel Variables... [ 30.067117] systemd[1]: Started Apply Kernel Variables. [ 30.077464] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 30.079306] systemd[1]: Started Remount Root and Kernel File Systems. [ 30.079854] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 30.080839] systemd[1]: Starting Load/Save Random Seed... [ 30.081860] systemd[1]: Starting Create System Users... [ 30.088140] RPC: Registered named UNIX socket transport module. [ 30.088143] RPC: Registered udp transport module. [ 30.088145] RPC: Registered tcp transport module. [ 30.088146] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 30.089732] systemd[1]: Mounted RPC Pipe File System. [ 30.141386] systemd[1]: Started udev Coldplug all Devices. [ 30.795425] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 30.813502] systemd[1]: Started Helper to synchronize boot up for ifupdown. [ 30.832681] systemd[1]: Started Load/Save Random Seed. [ 30.835102] systemd[1]: Started Create System Users. [ 30.835982] systemd[1]: Starting Create Static Device Nodes in /dev... [ 30.849271] systemd[1]: Started Create Static Device Nodes in /dev. [ 30.849463] systemd[1]: Reached target Local File Systems (Pre). [ 30.850230] systemd[1]: Starting udev Kernel Device Manager... [ 30.887689] systemd[1]: Started Journal Service. [ 30.900167] systemd-journald[455]: Received client request to flush runtime journal. [ 31.016915] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.CFAN], AE_NOT_FOUND (20190816/psargs-330) [ 31.016924] ACPI Error: Aborting method \_SB.IETM._TRT due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 31.017614] ACPI: AC Adapter [ADP1] (on-line) [ 31.080328] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input12 [ 31.113180] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 31.176568] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 31.195991] iTCO_vendor_support: vendor-support=0 [ 31.225973] mc: Linux media interface: v0.10 [ 31.227463] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 31.227510] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 31.228455] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 31.292803] Intel(R) Wireless WiFi driver for Linux [ 31.292806] Copyright(c) 2003- 2015 Intel Corporation [ 31.299283] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI [ 31.299572] input: PC Speaker as /devices/platform/pcspkr/input/input13 [ 31.300444] videodev: Linux video capture interface: v2.00 [ 31.318713] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode [ 31.318983] iwlwifi 0000:01:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm [ 31.344509] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 31.349315] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 31.349320] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 31.358835] Bluetooth: Core ver 2.22 [ 31.358855] NET: Registered protocol family 31 [ 31.358858] Bluetooth: HCI device and connection manager initialized [ 31.358864] Bluetooth: HCI socket layer initialized [ 31.358870] Bluetooth: L2CAP socket layer initialized [ 31.358875] Bluetooth: SCO socket layer initialized [ 31.365720] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:016F.0002/input/input14 [ 31.366152] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:016F.0002/input/input15 [ 31.366231] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:04F3:016F.0002/input/input16 [ 31.366707] hid-multitouch 0003:04F3:016F.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0 [ 31.392539] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 31.392543] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 31.392544] RAPL PMU: hw unit of domain package 2^-14 Joules [ 31.392546] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 31.392547] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 31.419231] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 31.575267] Bluetooth: HCI UART driver ver 2.3 [ 31.575272] Bluetooth: HCI UART protocol H4 registered [ 31.575274] Bluetooth: HCI UART protocol BCSP registered [ 31.575289] Bluetooth: HCI UART protocol LL registered [ 31.575291] Bluetooth: HCI UART protocol ATH3K registered [ 31.575300] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 31.575333] Bluetooth: HCI UART protocol Intel registered [ 31.575368] Bluetooth: HCI UART protocol Broadcom registered [ 31.575377] Bluetooth: HCI UART protocol QCA registered [ 31.575378] Bluetooth: HCI UART protocol AG6XX registered [ 31.575387] Bluetooth: HCI UART protocol Marvell registered [ 31.578035] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3239: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 31.578040] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 31.578042] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 31.578044] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 31.578046] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 31.578048] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 31.578051] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 31.584387] iwlwifi 0000:01:00.0: Detected Intel(R) Wireless N 7260, REV=0x144 [ 31.593021] Adding 8302588k swap on /dev/mapper/Minerva--vg-swap_1. Priority:-2 extents:1 across:8302588k SSFS [ 31.593640] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 31.593721] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 31.593778] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 31.593832] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 31.593884] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 31.601298] intel_rapl_common: Found RAPL domain package [ 31.601301] intel_rapl_common: Found RAPL domain core [ 31.601303] intel_rapl_common: Found RAPL domain uncore [ 31.601305] intel_rapl_common: Found RAPL domain dram [ 31.601308] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 31.613501] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (1bcf:123c) [ 31.628307] usbcore: registered new interface driver btusb [ 31.631072] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized! [ 31.631075] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized! [ 31.631077] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized! [ 31.631080] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized! [ 31.631269] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input24 [ 31.631376] usbcore: registered new interface driver uvcvideo [ 31.631377] USB Video Class driver (1.1.1) [ 31.631672] iwlwifi 0000:01:00.0: base HW address: hidden [ 31.651843] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 31.653319] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 31.653324] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 31.659483] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 31.659548] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25 [ 31.659604] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26 [ 31.795307] Bluetooth: hci0: unexpected event for opcode 0xfc2f [ 31.810330] Bluetooth: hci0: Intel firmware patch completed and activated [ 31.844421] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 34.409317] wlan0: authenticate with c8:0e:14:a6:da:54 [ 34.413595] wlan0: send auth to c8:0e:14:a6:da:54 (try 1/3) [ 34.418270] wlan0: authenticated [ 34.420016] wlan0: associate with c8:0e:14:a6:da:54 (try 1/3) [ 34.524035] wlan0: associate with c8:0e:14:a6:da:54 (try 2/3) [ 34.628059] wlan0: associate with c8:0e:14:a6:da:54 (try 3/3) [ 34.732128] wlan0: association with c8:0e:14:a6:da:54 timed out [ 40.782881] wlan0: authenticate with c8:0e:14:a6:da:54 [ 40.786653] wlan0: send auth to c8:0e:14:a6:da:54 (try 1/3) [ 40.791350] wlan0: authenticated [ 40.792021] wlan0: associate with c8:0e:14:a6:da:54 (try 1/3) [ 40.797261] wlan0: RX AssocResp from c8:0e:14:a6:da:54 (capab=0x1431 status=0 aid=1) [ 40.798488] wlan0: associated [ 40.851473] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.876104] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by c8:0e:14:a6:da:54 [ 40.922414] FS-Cache: Loaded [ 40.949428] FS-Cache: Netfs 'nfs' registered for caching [ 40.954211] Key type dns_resolver registered [ 41.103687] NFS: Registering the id_resolver key type [ 41.103697] Key type id_resolver registered [ 41.103699] Key type id_legacy registered