issue in detecting nvidia gpu in kali

Printable View

2014-04-16
komicha

issue in detecting nvidia gpu in kali

I have two graphical cards in my computer : nvidia 740m et intel hd.Both are detected and run perfectly under Windows 8 but when i test it in kali linux, i only detect intel hd.

the "lspci | grep -i vga" command give : 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)

Code:

root@kali:~# lsmod | grep -i nou* nouveau 888849 0 mxm_wmi 12515 1 nouveau ttm 65195 1 nouveau drm_kms_helper 35855 2 i915,nouveau drm 244416 5 ttm,i915,drm_kms_helper,nvidia,nouveau i2c_algo_bit 12751 2 i915,nouveau i2c_core 24129 8 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,nouveau,videodev wmi 17339 3 hp_wmi,mxm_wmi,nouveau video 17799 2 i915,nouveau button 12944 2 i915,nouveau

this is the output for lspci command :

Code:

root@kali:~# lspci -v 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) Subsystem: Hewlett-Packard Company Device 1963 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d2000000-d2ffffff Prefetchable memory behind bridge: 00000000a0000000-00000000bfffffff Capabilities: [88] Subsystem: Hewlett-Packard Company Device 1963 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Capabilities: [d94] #19 Kernel driver in use: pcieport 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 1963 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at d3000000 (64-bit, non-prefetchable) [size=4M] Memory at c0000000 (64-bit, prefetchable) [size=256M] I/O ports at 6000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Capabilities: [40] Express Root Port (Slot-), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Hewlett-Packard Company Device 1963 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport 00:1c.2 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #3 (rev d5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 Memory behind bridge: d3600000-d36fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Hewlett-Packard Company Device 1963 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #4 (rev d5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=0e, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d1000000-d1ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Hewlett-Packard Company Device 1963 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport 00:1c.6 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #7 (rev d5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d3500000-d35fffff Prefetchable memory behind bridge: 00000000d3400000-00000000d34fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Hewlett-Packard Company Device 1963 Capabilities: [a0] Power Management version 3 Kernel driver in use: pcieport 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device 1963 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 44 I/O ports at 6088 [size=8] I/O ports at 6094 [size=4] I/O ports at 6080 [size=8] I/O ports at 6090 [size=4] I/O ports at 6060 [size=32] Memory at d371b000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 1963 Flags: medium devsel, IRQ 18 Memory at d3719000 (64-bit, non-prefetchable) [size=256] I/O ports at 6040 [size=32] 01:00.0 3D controller: NVIDIA Corporation Device 1292 (rev a1) Subsystem: Hewlett-Packard Company Device 1963 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Memory at a0000000 (64-bit, prefetchable) [size=256M] Memory at b0000000 (64-bit, prefetchable) [size=32M] I/O ports at 5000 [size=128] Expansion ROM at b2000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] #19 Kernel driver in use: nvidia 08:00.0 Network controller: Ralink corp. Device 3290 Subsystem: Hewlett-Packard Company Device 18ec Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at d3610000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-00-67-86-6c-8b-18-70 Kernel driver in use: rt2800pci 08:00.1 Bluetooth: Ralink corp. Device 3298 Subsystem: Hewlett-Packard Company Device 18ec Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at d3600000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-00-68-86-6c-8b-18-70 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01) Subsystem: Hewlett-Packard Company Device 1963 Flags: bus master, fast devsel, latency 0, IRQ 41 Memory at d1000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 00-00-00-01-00-4c-e0-00 Capabilities: [150] Latency Tolerance Reporting Capabilities: [158] #1e Kernel driver in use: rtsx_pci 0f:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0c) Subsystem: Hewlett-Packard Company Device 1963 Flags: bus master, fast devsel, latency 0, IRQ 42 I/O ports at 3000 [size=256] Memory at d3500000 (64-bit, non-prefetchable) [size=4K] Memory at d3400000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00 Capabilities: [170] Latency Tolerance Reporting Kernel driver in use: r8169

you can see that the keyword Nvidia is present in the output, but when i use Nvidia-detect , it give me no nvidia gpu detected.

what could be the problem??
2014-04-19
dnuxer

same problem with me,

i use asus k46cb with nvida gforce GT740m

still wait for the solution
2014-04-20
staticn0de

I was able to make optirun work (740M would process the graphics for software like glxspheres) under Kali.

Just need to add the wheezy back ports repo and install bumblebee and nvidia-glx (instructions on the bumblebee wiki for debian)

I was not able to make cudahashcat or any other type of cuda work though.

Would not error out, just would not detect the nvidia card.

I've been trying for over a week. Hopefully someone figures out cuda on optimus based laptops.
2014-04-20
i6l6l6u

whitch kali version you have ? staticn0de i have the 1.0.6 64bit version. so i downgraded to 32 bit version or it possible to install to 64 bit version?
2014-04-20
staticn0de

1.0.6 fully updated 64Bit. I've never tried the 32bit.

Keep in mind that makes the drivers work and makes optirun work. But cuda and cudahashcat won't work. But I guess it's a step in the right direction.

Something along these lines (sorry, on my phone)

Fully update kali

Nano /etc/apt/sources.list

Add:

deb http://ftp.debian.org/debian wheezy-backports main contrib non-free

Save

Apt-get update

Apt-get install Linux-headers-$(uname - r)

cd ~
Wget http://sourceforge.net/projects/virt....3.3_amd64.deb

dpkg - I virtualgl_2.3.3_amd64.deb

Nano /etc/profile

Add /opt/virtualgl/bin to your path (double check this location, the folder will contain glxspheres64.)

Save and logout and then in.

sudo dpkg --add-architecture i386 && sudo apt-get update && sudo apt-get install -t wheezy-backports bumblebee-nvidia primus primus-libs:i386

That will take a while.

Use optirun glxspheres64

That command should make a window appear with a decent fps. Run just glxspheres64 on its own and it should be much less. This shows when you are using the video card.

Any errors about gpu not avalible follow the troubleshooting at the end of the bumblebee wiki, they will sort you out.

https://wiki.debian.org/Bumblebee

Remember to remove the entry in the sources.list and maybe an apt-get clean & & apt-get update
2014-04-20
i6l6l6u

Quote:

# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).

if [ "`id -u`" -eq 0 ]; then
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
else
PATH="/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games"
fi
export PATH

if [ "$PS1" ]; then
if [ "$BASH" ] && [ "$BASH" != "/bin/sh" ]; then
# The file bash.bashrc already sets the default PS1.
# PS1='\h:\w\$ '
if [ -f /etc/bash.bashrc ]; then
. /etc/bash.bashrc
fi
else
if [ "`id -u`" -eq 0 ]; then
PS1='# '
else
PS1='$ '
fi
fi
fi

# The default umask is now handled by pam_umask.
# See pam_umask(8) and /etc/login.defs.

if [ -d /etc/profile.d ]; then
for i in /etc/profile.d/*.sh; do
if [ -r $i ]; then
. $i
fi
done
unset i
fi

where put the pfath ? i dont understand
2014-04-20
staticn0de

Where that file has:

PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"

Change to:

PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/virtualgl"

Just remember to make sure /opt/virtualgl is the directory with glxspheres64
2014-04-20
i6l6l6u

the file glxspheres64 in folder opt/VirtualGL/bin so i use them PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/virtualgl/bin" ? right
2014-04-20
staticn0de

Yes, that's right.
2014-04-20
i6l6l6u

OK i try it now
2014-04-20
i6l6l6u

I hope it was done

nvidia-current:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/3.12-kali1-amd64/updates/dkms/

depmod....

DKMS: install completed.
Setting up nvidia-driver (319.82-1~bpo70+1) ...
Setting up libgl1-nvidia-glx-i386 (319.82-1~bpo70+1) ...
Processing triggers for initramfs-tools ...
I: update-initramfs is disabled (live system is running on read-only media).
Setting up bumblebee-nvidia (3.2.1-4~bpo70+1) ...
update-alternatives: using /usr/lib/mesa-diverted to provide /usr/lib/glx (glx) in manual mode
[ ok ] Restarting bumblebeed: bumblebeed.
Setting up primus (0~20130904-1~bpo70+1) ...
Processing triggers for menu ...

optirun glxspheres64
[ 5281.263647] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[ 5281.263695] [ERROR]Aborting because fallback start is disabled.
2014-04-20
brazen

your answer may be here that i posted a few weeks ago
https://forums.kali.org/showthread.p...fxi&highlight=

What is sgfxi?
sgfxi is a self-updating nvidia, ati/amd fglrx, and xorg free driver installer and xorg configuration script written for originally for Debian, but since expanded to also include support for Ubuntu and Arch Linux systems.

Easy to use, updated usually the same day as new nVidia drivers are released. fglrx support is much less reliable because ATI/AMD does not actively support cutting edge software, but it should be good for most fixed pool distributions based on Debian/Ubuntu, and the Debian Stable/Testing/Sid branch, as well as Arches rolling release model.
2014-04-20
i6l6l6u

doesnt work 4 me, but ty 4 help
2014-04-21
staticn0de

Quote:

optirun glxspheres64
[ 5281.263647] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver

[ 5281.263695] [ERROR]Aborting because fallback start is disabled.

These are the errors I mentioned may appear

nano /etc/bumblebee/bumblebee.conf

find the line: KernelDriver=nvidia and change to KernelDriver=nvidia-current

lspci | egrep 'VGA|3D'

Find the line which mentions nvidia or 3D and note the bus address (mine was 03:00.00)

nano /etc/bumblebee/xorg.conf.nvidia

Find the section that looks that the one below:

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"

Add a line for the bus ID so it looks like this (assuming your Bus ID from lspci | egrep 'VGA|3D' was 03:00.00)

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:03:00:0"

Note how the "." before the last 0 is now a ":"

restart bumblebee with:

service bumblebeed restart

run:

optirun glxspheres64

Should be fixed.
2014-04-21
komicha

i have read that it´s may be a kernel probleme related with the linux 3.12 (wich is the some kernel in my kali machine).do you have the same kernel??? the kernel 3.13 is not yet disponible for kali , so the other solution is to downgrade back to kernel 3.11. anyone now how to do that???