Can you show the output of uname-a?
Printable View
Hello everyone and thanks for reading me, (Sorry for my english I'm french)
I post here, I hope it is ok, it seems to be the place where we can talk about network issues.
I bought my AWUS036H, I connect it to my Mac, VMWARE Fusion asks to what system I want it to connect the AWUS I select Linux.
In Linux, no green light on the cart but when I do "airman-ng" my cart is detected 1/2, and when it is detected I can do monitoring "airman-ng start wlan0" and the answer is good. But, even when it's detected :
- first, I can't selected a wifi, only the icon wifi appears, nothing else.
- And when I want to do a any test with my wifi, for example with airman-ng or here with Fluxion, the card disconnect every time when it is used. I take a picture to show you my problem.
- Sometimes the cart is detected, but 2 minutes later, it is not detected anymore.
I tried to found drivers but they seems to not work in my case. I try to reinstall
my Virtual Machine but it don't help too.
Example of the problem :
Attachment 2261
I don't know why it happened, because I read that the drivers are normally already installed in kali, so I don't understand,
Thanks for reading me
Hello. Im new beginner Linux, and I can't find a driver for my USB wifi Although I downloaded the driver from the TP-Link homepage but I can't install it on kali linux, my adapter is TL-WN822N version 4.0 and using a chipset TRL8192EU.
Please help me
Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux. I installed it in an Ubuntu machine, and also in the Host machine (Windows 10) and it works fine in both instances.
Below is some output of a few commands:
iwconfig
Code:root@kali:~# iwconfig
eth1 no wireless extensions.
lo no wireless extensions.
eth0 no wireless extensions.
ifconfig
When I check in the USB devices of the VMWare, it shows as Realtek 802.11n NIC, but when I do lsusb it displays no info or the vendor at all:Code:eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 fe80::a00:27ff:fe27:6d4 prefixlen 64 scopeid 0x20<link>
ether 08:00:27:27:06:d4 txqueuelen 1000 (Ethernet)
RX packets 13246 bytes 12272521 (11.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5316 bytes 404986 (395.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 08:00:27:36:07:8e txqueuelen 1000 (Ethernet)
RX packets 26 bytes 3796 (3.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18 bytes 1860 (1.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 868 bytes 67932 (66.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 868 bytes 67932 (66.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Code:root@kali:~# lsusb
Bus 001 Device 002: ID 2357:010c
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I tried:
- Making sure it's uninstalled in the host machine
- Installing the compat-drivers
- Once compat-drivers are installed, I can see wlan0 and wlan1, but neither of those can do anything, they don't detect networks or send/receive any traffic at all.
- Reinstalling in the host machine the latest drivers
- Connecting the USB to other slot
- Verifying that the USB is set up (filtered) as USB 2.0 in the Virtualbox settings
- Changing the filter to USB 3.0
The machine I'm using is a Dell XPS15.
Thank you for any help, it is greatly appreciated.
Hello everyone,
Spent massive amount of time trying to get my wireless to work on Macbook Pro (Retina). I am running Kali Linux (rolling) on Mac with Dual Boot.
My wireless card is Broadcom 4360.
lspci -vv output shortly was:
Network controller: Broadcom Corporation BCM4360 802.11ac Wireless Network Adapter (rev 03)
I googled around and the current default drivers on Kali are not loading (they would be wrong anyway). So I tried follow the following guide since this should enable Broadcom 4360 properly: https://wiki.debian.org/wl
I follow steps 1-3 but I got an error on step 4.
The thing is I should be running version 4.9 but for some reason when I try to do 'modprobe wl' I get a fatal error - for some reason the command looks for the file in the 4.6 version and cant find it.
See attached the output from step 1-4 with the error.
Can anyone help me understand why i can't make it load the right driver - how do i change it to look in the right place?
Code:root@kali:~# apt-get update
Hit:1 http://kali.koyanet.lv/kali kali-rolling InRelease
Reading package lists... Done
root@kali:~# apt-get install linux-image-$(uname -r|sed 's,[^-]*-[^-]*-,,') linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-amd64 is already the newest version (4.9+80+kali1).
linux-image-amd64 is already the newest version (4.9+80+kali1).
broadcom-sta-dkms is already the newest version (6.30.223.271-5).
0 upgraded, 0 newly installed, 0 to remove and 1679 not upgraded.
root@kali:~# modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
root@kali:~# modprobe wl
modprobe: FATAL: Module wl not found in directory /lib/modules/4.6.0-kali1-amd64
Hello from Mexico excuse me, I hope you can endenteder since I do not know English and I do not write it either, so I use a translation to communicate with you. And installed kali linux on a laptop dell inspiron 5000 series and I could not, I do not know how to install the wifi driver, I have an integrated wifi card (dual band wireless-ac 3165). Will there be drivers for this type of wifi card? And if there is ... how do you install? Since I am new to linux and especially in kali linux, God bless you and thank you very much, I hope your prompt help.
Drivers for your wifi adapter come pre-installed in kali.Quote:
Hello
MediaTek 3570 error
pls help me
root@root:~/5370# make
make -C tools
make[1]: Entering directory '/root/5370/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory '/root/5370/tools'
/root/5370/tools/bin2h
cp -f os/linux/Makefile.6 /root/5370/os/linux/Makefile
make -C /lib/modules/4.0.0-kali1-amd64/build SUBDIRS=/root/5370/os/linux modules
make[1]: *** /lib/modules/4.0.0-kali1-amd64/build: No such file or directory. Stop.
Makefile:388: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2