airodump-ng not showing any results

Hey guys, so I'm new to Kali Linux and want to study it and I have followed some tutorials and stuff to learn about it. I'm having a problem with the command 'airodump-ng' as it's not showing any results at all no matter how many times I've tried it.

I use a Ralink RT5370 adapter and to my knowledge,it supports packet injection and Kali Linux 2020 on VirtualBox

I've already done the following steps:
-->apt-get update,upgrade,dist-upgrade
--->apt-get install firmware-ralink
-->changed the USB Controller to 3.0 and tried
-->tried it on a fresh install of kali and on a 2018.3 version
-->airmon-ng check kill
-->tried enabling monitor mode using other methods


I'm able to enable monitor mode and everything works perfectly. Can you tell me how to fix this please?

Here's a screenshot of the output: https://ibb.co/Fm6kfH9

Here's the code:

Code:

---

root@kali:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
        inet6 fe80::a00:27ff:fe3a:e47c  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:3a:e4:7c  txqueuelen 1000  (Ethernet)
        RX packets 4  bytes 930 (930.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 39  bytes 3216 (3.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 24  bytes 1356 (1.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 24  bytes 1356 (1.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


wlan0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 2e:1a:7c:c1:20:9f  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


root@kali:~# ifconfig wlan0 down
root@kali:~# airmon-ng check kill


Killing these processes:


    PID Name
  1496 wpa_supplicant


root@kali:~# iwconfig wlan0 mode monitor
root@kali:~# ifconfig wlan0 up
root@kali:~# iwconfig
wlan0    IEEE 802.11  Mode:Monitor  Frequency:2.412 GHz  Tx-Power=20 dBm 
          Retry short  long limit:2  RTS thr:off  Fragment thr:off
          Power Management:off
         
eth0      no wireless extensions.


lo        no wireless extensions.


root@kali:~# airodump-ng wlan0

---