Printable View
Booting and installing Kali over the network (PXE) can be useful from a single laptop install with no CDROM or USB ports, to enterprise deployments supporting preseeding of the Kali installation.
To read the full document, check our Installing Kali Linux over Network PXE article.
If you have any issues with this procedure, please post them in this thread.
Tried to install booting over network (PXE) as described to the article. Couldn't find a way to avoid message:
PXE-E53: No Boot Filename Received
Is there anyone that tried this method and made it work?
Thank you.
I've been trying (and failing) to use cobbler to install Kali 1.0.6 for the past few days. This is my first attempt at PXE booting debian and I had no idea that it would be so much more involved than RHEL, the system works great for booting CentOS.
So far I've gotten to the point where it boots to the installer, but then it stops at a Bad Archive Mirror message. I had imported the full iso into cobbler and replaced the /install/initrd.gz and linux files with ones provided by netboot to the article.
Through the preseed file I setup in cobbler, I've attempted to direct the install to use the cobbler http hosted image to install from but it just doesn't want to work. When the bad archive error message appears you have the option of selecting the archive to use, I try pointing it at the cobbler hosted URL for /dists/kali/ (I tried stable as well) but the installer complains that the Release file is not valid. I double checked to make sure that the URL I specify for the archive is accessible and the Release file is there.
Does anyone have any ideas what might solve the Debian archive issue for me? Does it need to point to a full Debian mirror? These hosts are not internet facing so they can't just reach out to the official repos but I can get a local mirror if that's what it takes.
A couple of other things:
1) Does anyone know the proper kernel options to provide so that this doesn't ask for a keyboard layout on install? We want this to be a completely unattended process. I've tried adding the following but it still asks me, I feel like everything I find on the internet might be outdated so these options aren't working properly for me:
keyboard-configuration/modelcode=SKIP keyboard-configuration/layout="English (US)" keyboard-configuration/variant="English (US)"
2) Examples or guidance for a preseed file to use with PXE booting kali would be awesome, I'm sure some of my frustrations are rooted in something wrong in there.
Thanks for any help!
Read here how to Network Install Kali (PXE) with Serva
http://www.vercot.com/~serva/an/NonWindowsPXE3.html
it really works and I didn't have to touch my DHCP server.
Hello
Does someone have the netboot image for Kali 2.0 ? still the old version on the article :<
Serva now PXE boots Kalix from v1.1.0a to v2016.1
http://www.vercot.com/~serva/an/NonWindowsPXE3.html
it uses the regular Kali distribution ISOs and a tiny additional initrd that fixes the PXE stuff. It works.
In a PXE environment the PXE client minimally must receive:
1. IP address
2. TFTP server IP address
3. Boot filename
This info is sometimes provided by a single DHCP server (which is PXE enabled) or
by a regular DHCP server (non PXE enabled) providing only IPs and a complementary proxyDHCP server
only providing the rest of the PXE related parameters.
In your case it looks like (despite which method you are using)
the Boot filename info is missing from the DHCP/proxyDHCP offer.
You can easily check this by running a Wireshark capture at your DHCP/proxyDHCP server
and see if the DHCPOFFER contains the Boot filename info or not. or looks like a typical DHCP/proxyDHCP miss-configuration
Following the provided instructions provided from the link
http://docs.kali.org/installation/ka...rk-pxe-install
and I reach point were I type "service dnsmasq restart" in Terminal.
I am followed by the response:
"Job for dnsmasq.service failed because the control process exited with error code. See "systemctl status dnsmasq.service" and "journalctl -xe" for details."
Where are my errors? I can provide the dnsmasq.conf file and any other information needed to resolve this issue and help me continue the Network PXE install
Would there be any noticeable difference running a SanDisk Ultra 8gb SD Card SDHC SDXC Class 10 40MB/s as opposed to a SanDisk ULTRA UHS-I 8GB Class 10 48MB/s MicroSDXC for Kali Linux on the Rpi2 and is 8gb sufficient?
When trying to download netboot.tar.gz from Kali docs, I get the error 403 Forbidden.
The PXE install doesn't succeed :
Code added to dnsmasq.conf:
service dnsmasq restartQuote:
interface=eth0
dhcp-range=192.168.101.100,192.168.101.200,12h
dhcp-boot=pxelinux.0
enable-tftp
tftp-root=/tftpboot/
dhcp-option=3,192.168.101.1
dhcp-option=6,8.8.8.8,8.8.4.4
Error :
What's the problem?Quote:
kali dnsmasq[1877]: TFTP directory /tftpboot/ inaccessible: No such file or directory
Regards.
Hansie
I found the solution.
In the article https://docs.kali.org/installation/k...rk-pxe-install first "Download Kali PXE Netboot Images
" then
HansieQuote:
service dnsmasq restart
Dear Member,
Could the progress of a PXE install be indicated?
About how long takes a PXE install?
Regards.
Hansie
I did intstall rEFInd and Step 6. can be replaced with using GParted to create the partition instead (less room for error that way).
Step 7. says to skip installing grub - which I did not find possible under 1.0.8, so I left the field blank and continued. In the end that worked fine.
After the install -- and before a reboot -- I found that my / partition contained a boot directory. I copied the devices.map over to the 'kaliefi' partition created in Step 6. and modified the grub.cfg. Kodi Lucky Patcher nox
I did intstall rEFInd and Step 6. can be replaced with using GParted to create the partition instead (less room for error that way).
Step 7. says to skip installing grub - which I did not find possible under 1.0.8, so I left the field blank and continued. In the end that worked fine.
After the install -- and before a reboot -- I found that my / partition contained a boot directory. I copied the devices.map over to the 'kaliefi' partition created in Step 6. and modified the grub.cfg.
provided by a single DHCP server (which is PXE enabled) or
by a regular DHCP server (non PXE enabled) providing only IPs and a complementary proxyDHCP server
only providing the rest of the PXE related parameters.
Good afternoon.
Hi, I'm new to the forum and new to kali linux. I had some issues installing kali linux on my PC, but it was fixed. Now I have another problem I cannot install any application due to (unfulfilled dependencies). here the message from the terminal.
The following packages have unmet dependencies:
gsettings-desktop-schemas: Break: mutter (<3.31.4) but 3.30.2-4 will be installed
libc6-dev: Break: libgcc-8-dev (<8.4.0-2 ~) but 8.2.0-14 will be installed
E: Error, pkgProblemResolver :: Resolve generated outages, this may be due to held packages.