Broadcom BCM43142 802.11 bgn still not working with Kali 2.

Hi guys,

just as I expected, my Broadcom BCM43142 802.11 bgn Wi-Fi Adapter is still not working with Kali 2.
I did a clean install, but after boot there was no option for wireless connections. On Windows everything works fine.
lspci successfully detects my network card, so that's not it.
I will include some pictures I made the other day:

Attachment 728
Attachment 729
Attachment 730

I hope this is enough information. I really want to experience this new Kali at its maximum.

I have also included my DxDiag.txt in the attachment.

I was really looking forward to use Kali 2 and was hoping the BCM issues would finally be fixed. :(


Thanks in advance.

Did it work with your old Kali Linux Distro ? you can try this http://www.chokepoint.net/2014/04/in...rivers-on.html

No, it did not work older Kali distro's either. I have tried the steps in the URL you provided, but it did not work, and it also did not work on the old Kali.

1. Make sure in your BIOS that your wifi device is turned on.

2. If you have a wifi on and off switch turn it on.

3 Try enabling the device in windows and then leave it enabled when shutting down and then boot into kali and see if your wifi device is present. On some laptops(we have two) if windows does not enable the internal wifi device it cannot be used by linux and all wifi devices fail.

MTeams

Rather than doing screenshots, can you do the complete log files?
The image is blurry and missing some text.

I know there is various licensing things with b43...
Make sure to have 'firmware-b43-installer' and firmware-b43legacy-installer' installed (apt-get -y install firmware-b43-installer firmware-b43legacy-installer).
More information: http://linuxwireless.org/en/users/Drivers/b43/#firmware

I managed to get a wired connection, and I did apt-get -y install firmware-b43-installer firmware-b43legacy-installer
It all seemed to install successfully, but after a reboot I saw no difference. It still doesn't seem to be working.

To confirm I have installed it:

Quote:

---

root@kali:~# apt-get -y install firmware-b43-installer firmware-b43legacy-installer
Reading package lists... Done
Building dependency tree
Reading state information... Done
firmware-b43-installer is already the newest version.
firmware-b43legacy-installer is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@kali:~#

---

Quote:

---

root@kali:~# ifconfig
eth0 Link encap:Ethernet HWaddr 8c:dc:d4:85:f6:f2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:10286 errors:0 dropped:0 overruns:0 frame:0
TX packets:7286 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11178112 (10.6 MiB) TX bytes:1391070 (1.3 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:960 (960.0 B) TX bytes:960 (960.0 B)

root@kali:~# iwconfig
eth0 no wireless extensions.

lo no wireless extensions.

root@kali:~#

---

What could be the cause of this?
Here is the link to the dmesg log on Pastebin.
It gives some errors between lines 895-897, but it says 'bluetooth' so I'm not sure if that is helpful.

finally i managed to install it.
Maybe this can help for you.

Code:

---

apt-get update
 apt-get install module-assistant wireless-tools
 m-a a-i broadcom-sta
 echo blacklist brcm80211 >> /etc/modprobe.d/broadcom-sta-common.conf
 update-initramfs -u -k $(uname -r)
 modprobe -r b44 b43 b43legacy ssb brcm80211
 modprobe wl
 reboot

---

No, I get these errors:

Code:

---

root@kali:~# update-initramfs -u -k $(uname -r)
I: update-initramfs is disabled (live system is running without media mounted on /lib/live/mount/medium).
root@kali:~# modprobe -r b44 b43 b43legacy ssb brcm80211
modprobe: FATAL: Module brcm80211 not found.

---

I got the same error and have the same card

I have the same problem and the same wireless card and the same error is your laptop lenovo g505

@darkshadowman thanks! It works! I own a Lenovo G500.
@Others I am only getting the error that brcm.... is not found (update-initramfs worked).
lspci prints the following output:
Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)

anytime.
we remove module brcm and the error is because cant find the module brcm because is not installed so no big deal!!

I solved your problem.

Here solution step by step.

1- Do update and upgrade as always.

apt-get update && apt-get upgrade && apt-get dist-upgrade -y

2- Install headers.

apt-get install linux-headers-`uname -r`

3-Install synaptic.

apt-get install synaptic -y

4-Open synaptic and type "bcm43142" and search.

5-U'll see 3 different drivers.

broadcom-sta-common
broadcom-sta-dkms
broadcom-sta-source

6-Mark for installation to broadcom-sta-dkms and install it.

7-Reboot.

Thats all u need.

Thank you SO much maskunderips. I have been fighting with this for the past couple days, but this fix worked like a charm! Thanks again.

Quote:

---

Originally Posted by darkshadowman

finally i managed to install it.
Maybe this can help for you.

Code:

---

apt-get update
 apt-get install module-assistant wireless-tools
 m-a a-i broadcom-sta
 echo blacklist brcm80211 >> /etc/modprobe.d/broadcom-sta-common.conf
 update-initramfs -u -k $(uname -r)
 modprobe -r b44 b43 b43legacy ssb brcm80211
 modprobe wl
 reboot

---

---

The above worked for me .
My laptop is Dell Inspiron 3421 Thanks.
ALso dont forget to turn the switch of your wifi after you reboot