Hey Quest,Quote:
Originally Posted by Quest
Thanks for trying it, you can unpack it manually and see how I did it with the 'ar' command.
Regards to what else we are missing, it's all kernel files. At a guess I would say they are no longer supported. When they are unpacked they take up huge amounts of disk space.
Hi,I am setting up bumblebee for my GT 650M following the guide on post #25 but when I run optirun glxspheres64 my laptop suddenly shutdown. Here's some command returns:
Code:# lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 650M] (rev ff)
Thanks in advance.Code:modinfo nvidia
filename: /lib/modules/3.14-kali1-amd64/updates/dkms/nvidia.ko
alias: char-major-195-*
version: 340.32
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.14-kali1-amd64 SMP mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
Hi there,Quote:
Originally Posted by ryuga
Try this from terminal and then run glxspheres64 with optirun
If that works, follow this post to make the change permanentCode:sudo tee /sys/module/rcutree/parameters/rcu_idle_gp_delay <<<1
https://forums.kali.org/showthread.p...ll=1#post36390
Hi staticn0de! Greate job. thank you.
excuse me for my English.
i did everything like 25 post suggests. and use last version of driver from nvidia
but have the same problem with "optirun glxspheres" like Xperianist
my HW
HP Pavilion 15-n060er with Intel and Nvidia GeForce 750M VGA
do you know how can i configure the system to use only discrete VGA?
Maybe Xperianist solved this problem? if you did please share solution
Any ideas? please help me with this. waiting for your answer
Okay, here we go! About time, right? Lol.Quote:
Originally Posted by staticn0de
dmesg after running optirun glxspheres64:
/etc/bumblebee/bumblebee.confCode:[ 239.050292] nvidia: module license 'NVIDIA' taints kernel.
[ 239.050298] Disabling lock debugging due to kernel taint
[ 239.620698] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 239.620969] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 239.620973] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
[ 303.632166] vgaarb: this pci device is not a vga device
[ 303.633346] nvidia 0000:01:00.0: irq 54 for MSI/MSI-X
[ 303.646647] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 303.646790] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 303.646873] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 303.646950] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 303.647024] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 303.647098] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 303.647214] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 303.647290] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 309.149085] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 309.150859] NVRM: RmInitAdapter failed! (0x24:0x38:1170)
[ 309.150873] NVRM: rm_init_adapter failed for device bearing minor number 0
[ 309.150909] NVRM: nvidia_frontend_open: minor 0, module->open() failed, error -5
/etc/bumblebee/xorg.conf.nvidiaCode:# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
lspci | egrep 'VGA|3D'Code:Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
modinfo nvidiaCode:00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation Device 0fe4 (rev a1)
modinfo nvidia-uvmCode:filename: /lib/modules/3.14-kali1-amd64/updates/dkms/nvidia.ko
alias: char-major-195-*
version: 340.32
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.14-kali1-amd64 SMP mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
echo $PATHCode:filename: /lib/modules/3.14-kali1-amd64/updates/dkms/nvidia-uvm.ko
supported: external
license: MIT
depends: nvidia
vermagic: 3.14-kali1-amd64 SMP mod_unload modversions
find 2> /dev/null / -name nvidia*.koCode:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/VirtualGL/bin:/usr/local/cuda-6.5/bin
Code:/var/lib/dkms/nvidia/340.32/3.14-kali1-amd64/x86_64/module/nvidia.ko
/var/lib/dkms/nvidia/340.32/3.14-kali1-amd64/x86_64/module/nvidia-uvm.ko
/lib/modules/3.14-kali1-amd64/updates/dkms/nvidia.ko
/lib/modules/3.14-kali1-amd64/updates/dkms/nvidia-uvm.ko
One more thing.. I realized that if I edit /etc/bumblebee/xorg.conf.nvidia and don't run the /etc/init.d/bumblebee restart command after, optirun glxspherest64 works, but only once. Here's the optirun and dmesg after it works for the first time.
optirun glxspheres64
dmesgCode:Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: GeForce GT 750M/PCIe/SSE2
Everything after the second "this pci device is not a vga device" ([ 1220.019129]) is after I close out of the glxsphere window.Code:[ 1219.791269] vgaarb: this pci device is not a vga device
[ 1219.791988] nvidia 0000:01:00.0: irq 54 for MSI/MSI-X
[ 1219.801105] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.801210] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.801273] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.801331] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.801386] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.801441] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.801529] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.801585] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1219.802873] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1220.019129] vgaarb: this pci device is not a vga device
[ 1265.335361] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1265.345654] [drm] Module unloaded
[ 1265.347855] bbswitch: disabling discrete graphics
[ 1265.347873] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[ 1265.364199] pci 0000:01:00.0: Refused to change power state, currently in D0
Thanks for your help!
edit:
I had thought I read all of the posts before posting but it seems I may have missed one.
Using the solution tonrin posted worked for me too!
Still lots of errors in dmesg but deviceQuery results in a pass!
This section is dedicated to common issues users experience and will be updated as more errors are reported
ERROR: could not insert 'nvidia_uvm': No such device
If you are receiving this error, be sure to run dmesg and post the output on the forums. This is normally caused because the driver the driver can not identify the hardware or be loaded by the kernel. Try the latest version of the driver if you are using a more modern graphics card.
I restarted the computer and I have a blank screen / screen with a solid cursor in the corner
I told you not to run nvidia-xconfig, didn't I?. Boot into recovery mode or use a live USB. Mount your file system and delete the xrog configuration file generated that nvidia-xconfig created.
/etc/init.d/bumbelbeed status shows that it is not running and it fails to restart
If you did not install linux-headers-$(uname -r) at the start, bbswitch can not be built and as a result, you can not swap between drivers and bumblebee can't load. Install the headers and reinstall bbswitch-dkms
When I run 'optirun glxspheres64' my screen goes black and the fans run at full speed. During my ensuing heart attack, the computer turns off. What do i do? OR alternatively, optirun glxspheres64 fails the first time I run it but works every second time.
This is a problem across all distributions using bumblebee. However, it is an easy fix. You may also see errors like that below:
orCode:[ 3224.482379] [ERROR]Cannot access secondary GPU - error: X did not start properly
[ 3224.482467] [ERROR]Aborting because fallback start is disabled.
Code:ERROR: Failed to initialize the NVIDIA GPU at PCI:1:0:0
To see if this fix will work for you before modifying grub, you can run the following:
If that fixed it, edit /etc/default/grub and change:Code:sudo tee /sys/module/rcutree/parameters/rcu_idle_gp_delay <<<1
ToCode:GRUB_CMDLINE_LINUX_DEFAULT="quiet"
and run 'update-grub' and restart.Code:GRUB_CMDLINE_LINUX_DEFAULT="quiet rcutree.rcu_idle_gp_delay=1"
For anyone interested, this guide will work with the newer CUDA 6.5 and NVIDIA 340.32 drivers.
Albeit, it's a bit slower. My pyrit benchmark has gone from ~11000 on CUDA 6.0 and NVIDIA 340.24 to ~7800 with the drivers mentioned above.
Thanks for the "common issues" guide and the new driver heads up... I wish I could say "can't stop progress", but that drop in performance is anything but. Sabotage might be a more appropriate term?
Who had problem when issued command #python setup.py build and screen give output like thisQuote:
Originally Posted by staticn0de
Solution :Quote:
[email protected]:~/pyrit-0.4.0# python setup.py build
svn: '.' is not a working copy
running build
running build_py
creating build
creating build/lib.linux-x86_64-2.7
copying pyrit_cli.py -> build/lib.linux-x86_64-2.7
creating build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/__init__.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/cpyrit.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/util.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/pckttools.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/config.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/network.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/storage.py -> build/lib.linux-x86_64-2.7/cpyrit
running build_ext
building 'cpyrit._cpyrit_cpu' extension
creating build/temp.linux-x86_64-2.7
creating build/temp.linux-x86_64-2.7/cpyrit
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cpyrit/_cpyrit_cpu.c -o build/temp.linux-x86_64-2.7/cpyrit/_cpyrit_cpu.o -Wall -fno-strict-aliasing -DVERSION="0.4.0"
cpyrit/_cpyrit_cpu.c:32:20: fatal error: Python.h: No such file or directory
compilation terminated.
error: command 'gcc' failed with exit status 1
#apt-get install build-essential python-dev libssl-dev
and it should be works now
Who had problem like me when issued command #phyton setup.py build , and your screen give output like thisQuote:
Originally Posted by staticn0de
this command should fix itQuote:
[email protected]:~/pyrit-0.4.0# python setup.py build
svn: '.' is not a working copy
running build
running build_py
creating build
creating build/lib.linux-x86_64-2.7
copying pyrit_cli.py -> build/lib.linux-x86_64-2.7
creating build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/__init__.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/cpyrit.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/util.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/pckttools.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/config.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/network.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/storage.py -> build/lib.linux-x86_64-2.7/cpyrit
running build_ext
building 'cpyrit._cpyrit_cpu' extension
creating build/temp.linux-x86_64-2.7
creating build/temp.linux-x86_64-2.7/cpyrit
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cpyrit/_cpyrit_cpu.c -o build/temp.linux-x86_64-2.7/cpyrit/_cpyrit_cpu.o -Wall -fno-strict-aliasing -DVERSION="0.4.0"
cpyrit/_cpyrit_cpu.c:32:20: fatal error: Python.h: No such file or directory
compilation terminated.
error: command 'gcc' failed with exit status 1
#apt-get install build-essential python-dev libssl-dev
Who had problem like me when issued command #phyton setup.py build , and your screen give output like thisQuote:
Originally Posted by staticn0de
this command should fix itQuote:
[email protected]:~/pyrit-0.4.0# python setup.py build
svn: '.' is not a working copy
running build
running build_py
creating build
creating build/lib.linux-x86_64-2.7
copying pyrit_cli.py -> build/lib.linux-x86_64-2.7
creating build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/__init__.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/cpyrit.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/util.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/pckttools.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/config.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/network.py -> build/lib.linux-x86_64-2.7/cpyrit
copying cpyrit/storage.py -> build/lib.linux-x86_64-2.7/cpyrit
running build_ext
building 'cpyrit._cpyrit_cpu' extension
creating build/temp.linux-x86_64-2.7
creating build/temp.linux-x86_64-2.7/cpyrit
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/include/python2.7 -c cpyrit/_cpyrit_cpu.c -o build/temp.linux-x86_64-2.7/cpyrit/_cpyrit_cpu.o -Wall -fno-strict-aliasing -DVERSION="0.4.0"
cpyrit/_cpyrit_cpu.c:32:20: fatal error: Python.h: No such file or directory
compilation terminated.
error: command 'gcc' failed with exit status 1
#apt-get install build-essential python-dev libssl-dev
interesting Voodoo stuff..
I have to runright after booting into Kali for my nVidia to 'wakeup'.Code:optirun pyrit benchmark
If I wait more than 5mins after booting, no nVidia related operations work.
It doesn't matter what I try. I have to restart the computer, then run optirun pyrit benchmarkQuote:
[email protected]:~# optirun pyrit benchmark
[11828.399100] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[11828.399158] [ERROR]Aborting because fallback start is disabled.
[email protected]:~#
Hi. :)
I've been trying to make Bumblebee work since yesterday, but with no luck.
QUOTING: "/etc/init.d/bumbelbeed status shows that it is not running and it fails to restart". I've exactly this problem, but I've installed linux-headers and bbswitch-dkms (and followed all the guide in post #25 until the instruction "/etc/init.d/bumblebeed restart
").
Any hint? I don't know which log I've to post here, so let me know.
Thank you all.
Hey there,Quote:
Originally Posted by Davide3i
This will most likely be something simple.
Post the output of:
use the [CODE] brackets to paste the output of commands (the code close bracket is a [*/CODE] without the *. Put all the text between them.
run optirun glxspheres64 and then paste the output of the command below. The last 30 lines or so.
Paste your /etc/bumblebee/bumblebee.confCode:dmesg
Paste your /etc/bumblebee/xorg.nvidia.conf
Paste the output of
Paste the output ofCode:lspci | egrep 'VGA|3D'
andCode:modinfo nvidia
andCode:modinfo nvidia-uvm
andCode:lsmod
andCode:cat /proc/acpi/bbswitch
Paste the output ofCode:echo $PATH
I know it's a lot, but as you are a new user it saves the turn around for your posts to get on the forum.Code:find 2> /dev/null / -name nvidia*.ko
also, try apt-get install linux-headers-$(uname -r) && apt-get install --reinstall bbswitch-dkms
After some more struggling, I've managed to make it work.
Thank you for your guide.
You're most welcome. I'm glad it worked for you.Quote:
Originally Posted by Davide3i
I need some help I have been trying to fix this for the longest finally got Bumblebee installed and ti run smoothly. The problem is when I get to the CUDA installation it does not ask me about Samples but instead during the instalation asks me only about the direcroty and if I want to create a symbolic file.
I unistalled by using purge nvidia-*Code:The next command will have no errors if all went well
modprobe nvidia-uvm //// I GET THIS WITH NO ERRORS ...
Now to make the CUDA samples and confirm it works! This make will take a little while... /// CANNOT FIND SAMPLES ANYWHERE. REINSTALLED CUDA AND NOTHING...
cd ~/NVIDIA_CUDA-5.5_Samples/NVIDIA_CUDA-5.5_Samples/
make
then uninstalled bumblebee
and started the process again ...
Everything goes fine but still cant get to install the samples I get the following
Thanks,Code:Driver: Not Selected
Toolkit: Installed in /usr/local/cuda-6.5
Samples: Not Supported
Hi there,Quote:
Originally Posted by in10se
I see a couple of problems with your setup.
First:
You are following the first guide, not post 25 as recommended.Code:The next command will have no errors if all went well
modprobe nvidia-uvm //// I GET THIS WITH NO ERRORS ...
Now to make the CUDA samples and confirm it works! This make will take a little while... /// CANNOT FIND SAMPLES ANYWHERE. REINSTALLED CUDA AND NOTHING...
cd ~/NVIDIA_CUDA-5.5_Samples/NVIDIA_CUDA-5.5_Samples/
make
Second
You are installing the bleeding edge cuda 6.5 (which is not bad) but you have not altered the commands in the guide to suit the new directories.Code:Toolkit: Installed in /usr/local/cuda-6.5
Two guides are in this thread. The guide starting at post 2 will install CUDA 5.5 and the nvidia drivers from the wheezy repo.
The guide starting at post 25 (the one which should be followed) will install NVIDIA 340.24 and CUDA 6.
Follow the guide at post 25 and if you decide to mix and match versions and parts of guides, you will need to amend the commands entered to match.
Thank you very much staticn0de for your time to make this post, everything went smooth and right now im all set up!! :)
and thanks to reintakura for that solution!
Hi,
I have the following problem: when I enter this last command, my screen goes totally black and my nvidia vgas start to run on full speed (vents go on full throttle) and after 20s my laptop shuts down. I suppose my hardware causes the peoblem, I have 3VGAs: the integrated intel hd4400, and 2 nvidia gt750M.Code:optirun glxspheres64
I know that this problem was mention here, but I did everything what staticn0de recomend, but nothing change.
dmesg has to long output. What you need exactly? I also erase comments from files for the same reason.
/etc/bumblebee/bumblebee.conf
/etc/bumblebee/xorg.conf.nvidiaCode:[bumblebeed]
VirtualDisplay=:8
KeepUnusedXServer=false
ServerGroup=bumblebee
TurnCardOffAtExit=false
NoEcoModeOverride=false
Driver=nvidia
XorgConfDir=/etc/bumblebee/xorg.conf.d
[optirun]
Bridge=auto
VGLTransport=proxy
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
AllowFallbackToIGC=false
[driver-nvidia]
KernelDriver=nvidia
PMMethod=auto
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
lspci | egrep 'VGA|3D'Code:Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
BusID "PCI:07:00:0"
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
Option "SLI" "AA"
EndSection
modinfo nvidiaCode:[email protected]:~# lspci | egrep 'VGA|3D'
01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fe4 (rev a1)
07:00.0 3D controller: NVIDIA Corporation Device 0fe4 (rev a1)
modinfo nvidia-uvmCode:[email protected]:~# modinfo nvidia
filename: /lib/modules/3.14-kali1-amd64/updates/dkms/nvidia.ko
alias: char-major-195-*
version: 340.46
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.14-kali1-amd64 SMP mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
lsmodCode:[email protected]:~# modinfo nvidia-uvm
filename: /lib/modules/3.14-kali1-amd64/updates/dkms/nvidia-uvm.ko
supported: external
license: MIT
depends: nvidia
vermagic: 3.14-kali1-amd64 SMP mod_unload modversions
cat /proc/acpi/bbswitchCode:[email protected]:~# lsmod
Module Size Used by
nls_utf8 12456 1
nls_cp437 16553 1
vfat 17185 1
fat 57965 1 vfat
nouveau 1053347 0
ttm 69667 1 nouveau
drm_kms_helper 39998 1 nouveau
drm 240557 3 ttm,drm_kms_helper,nouveau
i2c_algo_bit 12751 1 nouveau
nfnetlink_log 17241 0
nfnetlink 12989 1 nfnetlink_log
binfmt_misc 16949 1
loop 26605 0
dm_crypt 22731 0
snd_hda_codec_hdmi 45004 1
arc4 12543 2
iwldvm 130998 0
mac80211 488308 1 iwldvm
snd_hda_codec_realtek 54360 1
snd_hda_codec_generic 59079 1 snd_hda_codec_realtek
uvcvideo 78910 0
iTCO_wdt 12831 0
videobuf2_vmalloc 12816 1 uvcvideo
iTCO_vendor_support 12649 1 iTCO_wdt
videobuf2_memops 12519 1 videobuf2_vmalloc
videobuf2_core 35348 1 uvcvideo
videodev 122088 2 uvcvideo,videobuf2_core
usb_storage 52037 1
media 18303 2 uvcvideo,videodev
joydev 17108 0
x86_pkg_temp_thermal 12965 0
intel_powerclamp 17159 0
coretemp 12854 0
kvm_intel 138949 0
mxm_wmi 12515 1 nouveau
kvm 404503 1 kvm_intel
snd_hda_intel 39656 5
iwlwifi 87784 1 iwldvm
btusb 25619 0
snd_hda_codec 99921 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
bluetooth 243618 2 btusb
psmouse 86464 0
snd_hwdep 13148 1 snd_hda_codec
ideapad_laptop 17499 0
sparse_keymap 12760 1 ideapad_laptop
cfg80211 436618 3 iwlwifi,mac80211,iwldvm
6lowpan_iphc 16588 1 bluetooth
snd_pcm 88538 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
serio_raw 12849 0
lpc_ich 20768 0
snd_timer 26606 1 snd_pcm
i2c_i801 16963 0
mfd_core 12601 1 lpc_ich
evdev 17489 9
snd 61039 18 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
i2c_core 24265 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau,videodev
mei_me 13446 0
rfkill 18902 4 cfg80211,ideapad_laptop,bluetooth
soundcore 13026 1 snd
mei 50039 1 mei_me
ac 12678 0
battery 13101 0
wmi 17339 2 mxm_wmi,nouveau
video 17804 1 nouveau
processor 28221 0
button 12944 1 nouveau
ext4 489943 1
crc16 12343 2 ext4,bluetooth
mbcache 13082 1 ext4
jbd2 86788 1 ext4
dm_mod 89276 1 dm_crypt
hid_generic 12393 0
usbhid 44481 0
hid 94062 2 hid_generic,usbhid
sg 30043 0
sd_mod 44346 5
crc_t10dif 12431 1 sd_mod
crct10dif_pclmul 13348 1
crct10dif_common 12356 2 crct10dif_pclmul,crc_t10dif
crc32_pclmul 12915 0
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 151423 0
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
gf128mul 12970 1 lrw
glue_helper 12690 1 aesni_intel
ablk_helper 12572 1 aesni_intel
cryptd 14560 3 ghash_clmulni_intel,aesni_intel,ablk_helper
xhci_hcd 111830 0
ahci 29195 2
libahci 27103 1 ahci
alx 36175 0
mdio 12599 1 alx
ehci_pci 12472 0
ehci_hcd 48517 1 ehci_pci
libata 169163 2 ahci,libahci
scsi_mod 186841 4 sg,usb_storage,libata,sd_mod
usbcore 166472 8 btusb,uvcvideo,usb_storage,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 12440 1 usbcore
thermal 17468 0
thermal_sys 27685 5 video,intel_powerclamp,thermal,processor,x86_pkg_temp_thermal
echo $PATHCode:[email protected]:~# cat /proc/acpi/bbswitch
cat: /proc/acpi/bbswitch: No such file or directory
find 2> /dev/null / -name nvidia*.koCode:[email protected]:~# echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/VirtualGL/bin
Thak you for helpCode:[email protected]:~# find 2> /dev/null / -name nvidia*.ko
/var/lib/dkms/nvidia/340.46/3.14-kali1-amd64/x86_64/module/nvidia.ko
/var/lib/dkms/nvidia/340.46/3.14-kali1-amd64/x86_64/module/nvidia-uvm.ko
/lib/modules/3.14-kali1-amd64/updates/dkms/nvidia.ko
/lib/modules/3.14-kali1-amd64/updates/dkms/nvidia-uvm.ko
Sorry, now the output is
Code:[email protected]:~# optirun glxspheres64
[ 3199.014506] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 3199.014616] [ERROR]Aborting because fallback start is disabled.
I followed all the steps given by staticn0de in Post 25. After installing the NVIDIA drivers, I rebooted my machine. And X does not start anymore. If I change the Driver to intel and comment out the BusID "PCI:01:00:0" line, then X starts. I have an intel HD4000 along with NVidia 720M in my laptop (ASUS X550CC).
My Xorg.0.log give me the following:
What could be wrong?Code:Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.1.log" for additional information.
EDIT:
I found that the nvidia module was not loaded. I did a modprobe to load nvidia_uvm. Also, I removed the the xorg.conf file from /etc/X11/xorg.conf. It seems like I have made some progress but I have a different situation now. NVidia graphics does not seem to be working:
Code:[email protected]:~# grep EE /var/log/Xorg.0.log.old
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 58.071] (II) Loading extension MIT-SCREEN-SAVER
[ 58.179] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 58.180] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 58.180] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 58.180] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 58.180] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 63.816] (EE) NVIDIA(0): Failed to initiate mode change.
[ 63.817] (EE) NVIDIA(0): Failed to complete mode change
[ 103.649] (EE) NVIDIA(0): Failed to initiate mode change.
[ 103.649] (EE) NVIDIA(0): Failed to complete mode change
[ 112.896] (EE) NVIDIA(0): Failed to initiate mode change.
[ 112.896] (EE) NVIDIA(0): Failed to complete mode change
[ 119.568] (EE) NVIDIA(0): Failed to initiate mode change.
[ 119.569] (EE) NVIDIA(0): Failed to complete mode change
[ 1301.003] (EE) NVIDIA(0): Failed to initiate mode change.
[ 1301.003] (EE) NVIDIA(0): Failed to complete mode change
[ 1307.356] (EE) NVIDIA(0): Failed to initiate mode change.
[ 1307.356] (EE) NVIDIA(0): Failed to complete mode change
Code:[email protected]:~# glxspheres64
Polygons in scene: 62464
Visual ID of window: 0x95
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Ivybridge Mobile
60.561352 frames/sec - 50.915140 Mpixels/sec
60.224465 frames/sec - 50.631912 Mpixels/sec
60.468060 frames/sec - 50.836707 Mpixels/sec
[email protected]:~# optirun glxspheres64
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
10.274823 frames/sec - 8.638249 Mpixels/sec
10.256073 frames/sec - 8.622486 Mpixels/sec
10.965270 frames/sec - 9.218722 Mpixels/sec
9.337846 frames/sec - 7.850514 Mpixels/sec
9.863799 frames/sec - 8.292693 Mpixels/sec
[email protected]:~# dmesg|grep -i bbsw
[ 16.506061] bbswitch: version 0.8
[ 16.506085] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 16.506096] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 16.506434] bbswitch: detected an Optimus _DSM function
[ 16.506653] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 16.512184] bbswitch: disabling discrete graphics
[email protected]:~#
What could be going wrong? Any help would be appreciated. Thanks in advance!!Code:[email protected]:~# optirun -vv glxspheres64
[ 195.766002] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 195.766908] [INFO]Configured driver: nvidia
[ 195.767264] [DEBUG]optirun version 3.2.1 starting...
[ 195.767307] [DEBUG]Active configuration:
[ 195.767329] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 195.767350] [DEBUG] X display: :8
[ 195.767373] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 195.767393] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 195.767413] [DEBUG] Accel/display bridge: auto
[ 195.767433] [DEBUG] VGL Compression: proxy
[ 195.767452] [DEBUG] VGLrun extra options:
[ 195.767477] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 195.767633] [DEBUG]Using auto-detected bridge virtualgl
[ 203.267664] [INFO]Response: Yes. X is active.
[ 203.267701] [INFO]Running application using virtualgl.
[ 203.267911] [DEBUG]Process vglrun started, PID 4424.
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
12.681075 frames/sec - 10.661233 Mpixels/sec
10.998630 frames/sec - 9.246768 Mpixels/sec
10.563611 frames/sec - 8.881039 Mpixels/sec
11.111996 frames/sec - 9.342077 Mpixels/sec
[ 212.685700] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 212.685776] [DEBUG]Socket closed.
[ 212.685814] [DEBUG]Killing all remaining processes.
[email protected]:~#
I followed Post 25 to download and install the nvidia-drivers from nvidia's website. Now, each time I run 'apt-get install' to install something, apt-get asks me to run 'nvidia-installer --uninstall'. Do you folks also face the same issue? I have commented out the wheezy-backport from sources.list but still the problem persists.
Code:│ │
│ The nvidia-installer program was found on this system. This is probably left over from an earlier installation of the non-free │
│ NVIDIA graphics driver, installed using the NVIDIA *.run file directly. This installation is incompatible with the Debian │
│ packages. To install the Debian packages safely, it is therefore necessary to undo the changes performed by nvidia-installer. │
│ │
│ Run "nvidia-installer --uninstall"?
│ <Yes> <No> │
Ok, I've solved the 'nvidia-installer --uninstall' problem. There was the nvidia-installer-cleanup package in 'iF' status. Doing the following solved the problem:
Code:apt-get purge nvidia-installer-cleanup
Hi static0node,
Here's my configuration:
And strangely, none of the colon separated directories in my 'LibraryPath' exist!Code:[email protected]:~# cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
[email protected]:~#
I see that nVidia libraries are in /usr/lib. If I include that in my LibraryPath, then optirun glxgears dumps.Code:[email protected]:~# cd /usr/lib/x86_64-linux-gnu/nvidia
bash: cd: /usr/lib/x86_64-linux-gnu/nvidia: No such file or directory
[email protected]:~# cd /usr/lib/i386-linux-gnu/nvidia
bash: cd: /usr/lib/i386-linux-gnu/nvidia: No such file or directory
[email protected]:~# cd /usr/lib/nvidia
bash: cd: /usr/lib/nvidia: No such file or directory
[email protected]:~#
Code:/usr/lib/libkwinnvidiahack.so.4
/usr/lib/libkwinnvidiahack.so.4.8.0
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-cfg.so.340.46
/usr/lib/libnvidia-compiler.so.340.46
/usr/lib/libnvidia-eglcore.so.340.46
/usr/lib/libnvidia-encode.so
/usr/lib/libnvidia-encode.so.1
/usr/lib/libnvidia-encode.so.340.46
/usr/lib/libnvidia-fbc.so
/usr/lib/libnvidia-fbc.so.1
/usr/lib/libnvidia-fbc.so.340.46
/usr/lib/libnvidia-glcore.so.340.46
/usr/lib/libnvidia-glsi.so.340.46
/usr/lib/libnvidia-ifr.so
/usr/lib/libnvidia-ifr.so.1
Code:[email protected]:~# optirun -vv glxgears
[22184.002479] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[22184.003239] [INFO]Configured driver: nvidia
[22184.003544] [DEBUG]optirun version 3.2.1 starting...
[22184.003587] [DEBUG]Active configuration:
[22184.003621] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[22184.003658] [DEBUG] X display: :8
[22184.003692] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia:/usr/lib
[22184.003729] [DEBUG] Socket path: /var/run/bumblebee.socket
[22184.003762] [DEBUG] Accel/display bridge: auto
[22184.003797] [DEBUG] VGL Compression: proxy
[22184.003829] [DEBUG] VGLrun extra options:
[22184.003863] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[22184.003969] [DEBUG]Using auto-detected bridge virtualgl
[22191.468977] [INFO]Response: Yes. X is active.
[22191.469014] [INFO]Running application using virtualgl.
[22191.469293] [DEBUG]Process vglrun started, PID 5223.
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x200002
Serial number of failed request: 38
Current serial number in output stream: 38
[22191.630283] [DEBUG]SIGCHILD received, but wait failed with No child processes
[22191.630313] [DEBUG]Socket closed.
[22191.630332] [DEBUG]Killing all remaining processes.
[email protected]:~# optirun -b primus -vv glxgears
[22199.144120] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[22199.144849] [INFO]Configured driver: nvidia
[22199.145104] [DEBUG]optirun version 3.2.1 starting...
[22199.145143] [DEBUG]Active configuration:
[22199.145164] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[22199.145184] [DEBUG] X display: :8
[22199.145205] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia:/usr/lib
[22199.145226] [DEBUG] Socket path: /var/run/bumblebee.socket
[22199.145247] [DEBUG] Accel/display bridge: primus
[22199.145268] [DEBUG] VGL Compression: proxy
[22199.145292] [DEBUG] VGLrun extra options:
[22199.145311] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[22207.331180] [INFO]Response: Yes. X is active.
[22207.331221] [INFO]Running application using primus.
[22207.331496] [DEBUG]Process glxgears started, PID 5250.
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x200002
Serial number of failed request: 38
Current serial number in output stream: 38
[22207.434966] [DEBUG]SIGCHILD received, but wait failed with No child processes
[22207.434987] [DEBUG]Socket closed.
[22207.435001] [DEBUG]Killing all remaining processes.
[email protected]:~#
I think I have a better bumblebee.conf file now. I now have a different error, after doing the following:
Code:[email protected]:~# mkdir -p /usr/lib/nvidia
[email protected]:~# mv /usr/lib/libGL* /usr/lib/nvidia
[email protected]:~# cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
# XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgModulePath=/usr/lib/xorg/modules/drivers,/usr/lib/xorg/modules/extensions
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Code:[email protected]:~# optirun glxspheres64
[ 3856.451352] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 3856.451431] [ERROR]Aborting because fallback start is disabled.
[email protected]:~#
Great! Everything works fine now. I am able to run both with my integrated intel graphics and nvidia graphics. My CUDA tests PASS too!! Thanks to all of you, and most importantly to static0node for the excellent howto.
In case somebody faces the same problem as I did, here's what I did:
bumblebee's log at /var/log/Xorg.8.log gave me all the info I needed to correct my problems. Alternatively, you can stop bumblebee with '/etc/init.d/bumblebee stop' command. Then you can manually launch the daemon by issuing 'bumblebeed -vv' from a console. Note: that is two consecutive 'v's.
I figured out from the log file that the Xorg server for my nvidia card was using the libglx.so library built by "X.org Foundation" and not the one supplied by NVIDIA. The one supplied by NVIDIA was located in '/usr/lib/xorg/modules/extensions' and was named as 'libglx.so.340.46'. I made a backup of my libglx.so in that directory and renamed libglx.so.340.46 to libglx.so. And tried to relaunch bumblebee, and lo and behold, it all worked like a charm. But when I restarted my X server, my intel glx stopped working. Predictably. Long story short, here is what I effectively did:
And here's my bumblebee.confCode:[email protected]:~# cd /usr/lib/xorg
[email protected]:/usr/lib/xorg# mkdir -p nvidia
[email protected]:/usr/lib/xorg# cp -R modules/* nvidia/
[email protected]:/usr/lib/xorg# cd nvidia/extensions/
[email protected]:/usr/lib/xorg/nvidia/extensions# mv libglx.so.340.46 libglx.so
That was it. Every thing work fine now! Both OpenGL and CUDA apps use my nvidia 720m card.Code:[email protected]:~# cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/xorg/nvidia/drivers,/usr/lib/xorg/nvidia
# XorgModulePath=
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
[email protected]:~#
My laptop is an ASUS X550CC with ETPS/2 Elantech Touchpad. My CUDA driver and run-time don't match. I will try upgrading to CUDA 6.5 and see what happens later on.Code:[email protected]:/opt/cuda/NVIDIA_CUDA-6.0_Samples/bin/x86_64/linux/release# optirun ./deviceQuery
./deviceQuery Starting...
CUDA Device Query (Runtime API) version (CUDART static linking)
Detected 1 CUDA Capable device(s)
Device 0: "GeForce GT 720M"
CUDA Driver Version / Runtime Version 6.5 / 6.0
CUDA Capability Major/Minor version number: 3.5
Total amount of global memory: 2048 MBytes (2147352576 bytes)
( 1) Multiprocessors, (192) CUDA Cores/MP: 192 CUDA Cores
GPU Clock rate: 758 MHz (0.76 GHz)
Memory Clock rate: 800 Mhz
Memory Bus Width: 64-bit
L2 Cache Size: 524288 bytes
Maximum Texture Dimension Size (x,y,z) 1D=(65536), 2D=(65536, 65536), 3D=(4096, 4096, 4096)
Maximum Layered 1D Texture Size, (num) layers 1D=(16384), 2048 layers
Maximum Layered 2D Texture Size, (num) layers 2D=(16384, 16384), 2048 layers
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Max dimension size of a thread block (x,y,z): (1024, 1024, 64)
Max dimension size of a grid size (x,y,z): (2147483647, 65535, 65535)
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 1 copy engine(s)
Run time limit on kernels: Yes
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Disabled
Device supports Unified Addressing (UVA): Yes
Device PCI Bus ID / PCI location ID: 1 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 6.5, CUDA Runtime Version = 6.0, NumDevs = 1, Device0 = GeForce GT 720M
Result = PASS
Code:[email protected]:~# optirun glxspheres64
Polygons in scene: 62464
Visual ID of window: 0x21
Context is Direct
OpenGL Renderer: GeForce GT 720M/PCIe/SSE2
126.708808 frames/sec - 123.235973 Mpixels/sec
126.436952 frames/sec - 122.971568 Mpixels/sec
125.862084 frames/sec - 122.412456 Mpixels/sec
128.373977 frames/sec - 124.855503 Mpixels/sec
126.762602 frames/sec - 123.288292 Mpixels/sec
128.711295 frames/sec - 125.183576 Mpixels/sec
[email protected]:~#
Hi Filip0913,
launch optirun -vv glxspheres64 and then paste here the output from /var/log/Xorg.8.log (assuming a new instance of X launches on tty 8)
Code:optirun -vv glxspheres64
Code:cat /var/log/Xorg.8.log
Thank you . your thread helped me a lot.
I had done it successfully before without cuda only I could run apps with optirun. after a re-installation of kali I followed your post and here are the result : deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 6.5, CUDA Runtime Version = 6.5, NumDevs = 1, Device0 = GeForce GT 740M
Result = PASS
Hi,
i have the following problem:
i followed the guide and i arrived at the step in which i have to edit xorg.conf.nvidia
i don't have that file (is it supposed to be in /etc/X11 ? ) so i could create it and the only content would be that in quote tag.. is that correct?Quote:
Edit xorg.conf.nvidia and add a line under the 'Section "Device"' area so that is matches what is shown below. Change the bus ID to match what you recorded previously and take note that you recored a . before the last number and it is now a ':'. You need the ':'.
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:03:00:0"
open a console >Code:nano /etc/bumblebee/xorg.conf.nvidia
I'm having a strange issue.
first as I stated before in a reply everything worked well. I even proceeded and tried pyrit and cudahashcat on a wpa2 handshake it worked well I successfully cracked my own wpa2 password with both methods.
got a problem then i fixed it with grub . I got another one with nvidia-uvm so I compiled it and replaced it in dkms/ .
now when I restart and run modprobe nvidia or modprobe nvidia-uvm I get no such device. so I checked the Cuda devicequery test to see if still passes which it did , suddenly the modprobe worked again
I restarted the same thing happened it only works after I do the cuda test . I checked my paths in bashrc everything is right in it. what could be the problem ?
- can you copy/paste the error message here.
- runright after having booted on to Kali(don't wait too long after having booted, or it might not work).Code:optirun pyrit benchmark
here is my pyrit benchmark and cores
It's clear No GPU is detected even if i used optirunCode:# optirun pyrit list_cores
Pyrit 0.4.0 (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3+
The following cores seem available...
#1: 'CPU-Core (SSE2)'
#2: 'CPU-Core (SSE2)'
#3: 'CPU-Core (SSE2)'
#4: 'CPU-Core (SSE2)'
#5: 'CPU-Core (SSE2)'
#6: 'CPU-Core (SSE2)'
#7: 'CPU-Core (SSE2)'
#8: 'CPU-Core (SSE2)
no GPU .Code:optirun pyrit benchmark
Pyrit 0.4.0 (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3+
Running benchmark (2922.3 PMKs/s)... /
Computed 2922.27 PMKs/s total.
#1: 'CPU-Core (SSE2)': 389.2 PMKs/s (RTT 3.3)
#2: 'CPU-Core (SSE2)': 384.7 PMKs/s (RTT 3.3)
#3: 'CPU-Core (SSE2)': 402.0 PMKs/s (RTT 3.3)
#4: 'CPU-Core (SSE2)': 394.1 PMKs/s (RTT 3.3)
#5: 'CPU-Core (SSE2)': 401.3 PMKs/s (RTT 3.2)
#6: 'CPU-Core (SSE2)': 395.2 PMKs/s (RTT 3.3)
#7: 'CPU-Core (SSE2)': 401.6 PMKs/s (RTT 3.2)
#8: 'CPU-Core (SSE2)': 395.8 PMKs/s (RTT 3.3)
But for cudahashcat it detects GPU
here is MD5 test
I'm using pyrit that comes preinstalled with Kali 1.0.9 I checked it's the same version that exist in the dev siteCode:Speed.GPU.#1.: 1875.2 MH/s
Hashtype: MD5
Workload: 1024 loops, 256 accel
to load the modules i created an alias to run the cuda test pass everytime i restart .
i followed the guide at post #25 and then i installed pyrit but when i try to benchmark i get:
Quote:
[12953.257431] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[12953.257532] [ERROR]Aborting because fallback start is disabled.
@ bahha & rego, the only thing I can recommend is to try a fresh Kali install until staticn0de returns.
This whole installation is somewhat fragile and any subsequent modification to core files seems to mess things up. I wish to be more precise but all I know is that I have to run 'optirun pyrit benchmark' in the following minutes after booting into Kali to be able to use cudaHashcat, or else I get the same error as the above post #116, and I have to reboot.
@ Quest I did install everything after a fresh install of the Os .
everything is working except pyrit I'll try to compile it from source and see .
having to run optirun after moments of boot . I think I may make it as a start up application. so far for cuda test pass I made an alias in bashrc .
but wait, mine is exactly like yours in post #115. No mention of GPU, ever.
Your telling me that Pyrit is supposed to detect and use GPU along with CPUs? If that's the case then mine never worked.
opps actually Pyrit does detect/use my GPU..
Code:[email protected]:~# optirun pyrit benchmark
Pyrit 0.4.1-dev (svn r308) (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3+
Running benchmark (9002.1 PMKs/s)... -
Computed 9002.07 PMKs/s total.
#1: 'CUDA-Device #1 'GeForce GT 630M'': 5761.6 PMKs/s (RTT 2.8)
#2: 'CPU-Core (SSE2/AES)': 520.8 PMKs/s (RTT 3.0)
#3: 'CPU-Core (SSE2/AES)': 521.7 PMKs/s (RTT 3.0)
#4: 'CPU-Core (SSE2/AES)': 523.7 PMKs/s (RTT 3.0)
#5: 'CPU-Core (SSE2/AES)': 523.5 PMKs/s (RTT 3.0)
#6: 'CPU-Core (SSE2/AES)': 518.2 PMKs/s (RTT 3.0)
#7: 'CPU-Core (SSE2/AES)': 523.5 PMKs/s (RTT 3.0)
#8: 'CPU-Core (SSE2/AES)': 507.0 PMKs/s (RTT 3.0)
[email protected]:~#