Just registered to say Thank You! Was stuck with this since last 3 months. Thanks to "noobiesmall" for his modified guide. Thanks to duiker.ts for his checks. And finally to staticn0de, I was just gonna post that it was not working and I was making the outputs as required by staticn0de where I caught the error myself! Thanks a lot, my cudaHashcat is finally working properly.
Much appreciated static!
ocl/cuda/hashcat is at version 2.0.1 now http://hashcat.net/oclhashcat/
http://hashcat.net/forum/thread-4882.htmlQuote:
Full changelog v1.37 -> v2.00
...
Made the project Open-Source
...
Hey Quest, It's been a long time.
I made a custom deb for kali (cudahashcat-2.01) and updated second post. I'm not sure if anyone actually uses them that's why I stopped making them.
https://forums.kali.org/showthread.p...ll=1#post35240
Thank you kindly sir for that deb! DLing now... :cool: Yes it's been a while. Good to see you around!! *might be heading your way if I find a project in Oz*
I do not know how many use it. I do know that oclhashcat is a different animal that must be handled with care. I had a very close call. It almost killed my lappy once. After a catastrophic shutdown due to overheat, it took 10mins to be able to re-start my comp. That was ugly and scary.
Cheers!!
That is a close call! I normally save the number crunching for my desktops with water-cooling for that exact reason. That, and you can't really compare the results from a full size card to a laptop chipset.Quote:
Originally Posted by Quest
Hey,
ive some problems can you help me pls iam new on Kali and tried this tutorial but it doesnt load the bumblebee daemon.
here are the outputs:
1: lspci | egrep 'VGA|3D'
2: modprobe nvidiaCode:01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 420M] (rev a1)
3: modprobe nvidia-uvmCode:No Output :/
4:optirun glxspheres64Code:No Output :/
5: dmesg | tail -n 100Code:[ 748.065193] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[ 748.065249] [ERROR]Could not connect to bumblebee daemon - is it running?
6: echo $PATHCode:[ 21.232850] sound hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 21.232855] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.232856] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 21.232858] sound hdaudioC0D0: mono: mono_out=0x0
[ 21.232859] sound hdaudioC0D0: inputs:
[ 21.232861] sound hdaudioC0D0: Internal Mic=0x19
[ 21.232863] sound hdaudioC0D0: Mic=0x18
[ 21.239431] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input12
[ 21.239547] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 21.239574] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 21.259659] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 21.740485] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 21.740501] acer_wmi: Function bitmap for Communication Button: 0x1
[ 21.740504] acer_wmi: Brightness must be controlled by acpi video driver
[ 21.741046] input: Acer WMI hotkeys as /devices/virtual/input/input17
[ 21.741298] input: Acer BMA150 accelerometer as /devices/virtual/input/input18
[ 21.816795] iTCO_vendor_support: vendor-support=0
[ 21.851780] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 21.851820] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 21.851927] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.973041] cfg80211: Calling CRDA to update world regulatory domain
[ 22.382514] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[ 22.425870] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 22.425940] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 22.425999] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 22.426054] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[ 22.498870] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 0, fw id: 570026
[ 22.573330] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
[ 22.669328] ACPI: Battery Slot [BAT0] (battery present)
[ 22.734189] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 22.921024] media: Linux media interface: v0.10
[ 23.040435] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 23.131632] Linux video capture interface: v2.00
[ 23.518833] ath: phy0: ASPM enabled: 0x43
[ 23.518838] ath: EEPROM regdomain: 0x65
[ 23.518839] ath: EEPROM indicates we should expect a direct regpair map
[ 23.518841] ath: Country alpha2 being used: 00
[ 23.518842] ath: Regpair used: 0x65
[ 23.561659] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 23.561920] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010860000, irq=17
[ 23.676708] ACPI: AC Adapter [AC] (on-line)
[ 23.753970] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 23.763763] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input23
[ 23.763856] usbcore: registered new interface driver uvcvideo
[ 23.763859] USB Video Class driver (1.1.1)
[ 23.948302] Adding 8110076k swap on /dev/mapper/Unknown--vg-swap_1. Priority:-1 extents:1 across:8110076k FS
[ 24.575674] cfg80211: World regulatory domain updated:
[ 24.575679] cfg80211: DFS Master region: unset
[ 24.575680] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 24.575682] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.575683] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.575685] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.575687] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 24.575689] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 24.575690] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 24.575691] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.575693] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 26.401686] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 26.404192] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 27.220178] systemd-journald[262]: Received request to flush runtime journal from PID 1
[ 32.587342] Bluetooth: Core ver 2.20
[ 32.587360] NET: Registered protocol family 31
[ 32.587361] Bluetooth: HCI device and connection manager initialized
[ 32.587366] Bluetooth: HCI socket layer initialized
[ 32.587368] Bluetooth: L2CAP socket layer initialized
[ 32.587376] Bluetooth: SCO socket layer initialized
[ 32.986493] Netfilter messages via NETLINK v0.30.
[ 38.829311] tg3 0000:02:00.0 eth0: Link is down
[ 64.092415] wlan0: authenticate with a6:81:c4:bb:57:5a
[ 64.108775] wlan0: direct probe to a6:81:c4:bb:57:5a (try 1/3)
[ 64.310138] wlan0: send auth to a6:81:c4:bb:57:5a (try 2/3)
[ 64.334631] wlan0: authenticated
[ 64.338207] wlan0: associate with a6:81:c4:bb:57:5a (try 1/3)
[ 64.344617] wlan0: RX AssocResp from a6:81:c4:bb:57:5a (capab=0x421 status=0 aid=1)
[ 64.344745] wlan0: associated
[ 64.344809] cfg80211: Calling CRDA for country: DE
[ 64.347533] ath: EEPROM regdomain: 0x8114
[ 64.347537] ath: EEPROM indicates we should expect a country code
[ 64.347538] ath: doing EEPROM country->regdmn map search
[ 64.347539] ath: country maps to regdmn code: 0x37
[ 64.347540] ath: Country alpha2 being used: DE
[ 64.347541] ath: Regpair used: 0x37
[ 64.347542] ath: regdomain 0x8114 dynamically updated by country IE
[ 64.347583] cfg80211: Regulatory domain changed to country: DE
[ 64.347584] cfg80211: DFS Master region: ETSI
[ 64.347585] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 64.347587] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 64.347589] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 64.347591] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 64.347592] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 64.347593] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 364.967021] wlan0: AP a6:81:c4:bb:57:5a changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[ 701.849901] perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 740.822204] [drm] Initialized drm 1.1.0 20060810
[ 740.997184] nvidia: module license 'NVIDIA' taints kernel.
[ 740.997191] Disabling lock debugging due to kernel taint
[ 741.007453] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 741.007938] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 741.007944] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 741.030624] nvidia_uvm: Loaded the UVM driver, major device number 246
Code:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin
7: cat /etc/bumblebee/bumblebee.conf
8: cat /etc/bumblebee/xorg.conf.nvidiaCode:# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
9:service bumblebeed restartCode:Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
10: modinfo nvidiaCode:No Output :/
11: find 2> /dev/null / -name nvidia*.koCode:modinfo: ERROR: Module nvidia not found.
Code:/var/lib/dkms/nvidia-current/352.21/4.0.0-kali1-amd64/x86_64/module/nvidia-current.ko
/var/lib/dkms/nvidia-current/352.21/4.0.0-kali1-amd64/x86_64/module/nvidia-uvm.ko
/lib/modules/4.0.0-kali1-amd64/updates/dkms/nvidia-current.ko
/lib/modules/4.0.0-kali1-amd64/updates/dkms/nvidia-uvm.ko
Hi sl1k3rx,
Welcome to the forum.
Are you sure you have an optimus laptop? I can't see your intel card in dmesg or lspci.
For example, mine shows:
What is the full output of lspci? (no parameters)Code:root@kali:~# lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
03:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev ff)
1.
2.Code:lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
04:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
3.Code:modprobe nvidia --> NO ouput in terminal
4.Code:modprobe nvidia-uvm --> NO ouput in terminal
5.Code:modinfo nvidia
modinfo: ERROR: Module nvidia not found
$ modinfo nvidia-uvm
filename: /lib/modules/4.0.0-kali1-amd64/updates/dkms/nvidia-uvm.ko
supported: external
license: MIT
depends: nvidia
vermagic: 4.0.0-kali1-amd64 SMP mod_unload modversions
parm: NVuvm_prefetch_stats:int
parm: NVuvm_prefetch_threshold:int
parm: NVuvm_prefetch_adaptive:int
parm: NVuvm_prefetch_epoch:int
parm: NVuvm_prefetch_sparsity_inc:int
parm: NVuvm_prefetch_sparsity_dec:int
parm: NVuvm_prefetch:int
6.Code:echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin
7.Code:dmesg | tail -n 100
[ 27.169640] systemd-journald[271]: Received request to flush runtime journal from PID 1
[ 33.199522] bbswitch: version 0.8
[ 33.199530] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 33.199539] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PEGP
[ 501.380850] nvidia: module license 'NVIDIA' taints kernel.
[ 501.380856] Disabling lock debugging due to kernel taint
[ 501.839747] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[ 501.840241] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:04:00.0 on minor 1
[ 501.840246] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 501.869241] nvidia_uvm: Loaded the UVM driver, major device number 248
[ 519.056665] vgaarb: this pci device is not a vga device
[ 519.074805] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.074864] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.074896] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.074925] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.074953] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.074981] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.075026] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.075055] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.092205] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
[ 519.296065] vgaarb: this pci device is not a vga device
[ 526.205863] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
11.Code:cat /etc/bumblebee/bumblebee.conf
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
8.
9.
Code:
cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:04:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
10.
Code:
find 2> /dev/null / -name nvidia*.ko
/var/lib/dkms/nvidia-current/352.21/4.0.0-kali1-amd64/x86_64/module/nvidia-current.ko
/var/lib/dkms/nvidia-current/352.21/4.0.0-kali1-amd64/x86_64/module/nvidia-uvm.ko
/lib/modules/4.0.0-kali1-amd64/updates/dkms/nvidia-current.ko
/lib/modules/4.0.0-kali1-amd64/updates/dkms/nvidia-uvm.ko
cat /etc/modprobe.d/nvidia.conf
alias nvidia nvidia-current
remove nvidia-current rmmod nvidia nvidia-uvm
12.Code:ls /lib/modules/3.14-kali1-amd64/updates/dkms
ls: cannot access /lib/modules/3.14-kali1-amd64/updates/dkms: No such file or directory
13.Code:cat /lib/modules/3.14-kali1-amd64/modules.dep | grep -i nvidia
cat: /lib/modules/3.14-kali1-amd64/modules.dep: No such file or directory
14.Code:dmesg
[ 501.380850] nvidia: module license 'NVIDIA' taints kernel.
[ 501.380856] Disabling lock debugging due to kernel taint
[ 501.839747] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[ 501.840241] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:04:00.0 on minor 1
[ 501.840246] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 501.869241] nvidia_uvm: Loaded the UVM driver, major device number 248
[ 519.056665] vgaarb: this pci device is not a vga device
Code:lsmod
Module Size Used by
nvidia_uvm 73728 0
nvidia 8519680 1 nvidia_uvm
nfnetlink_queue 24576 0
nfnetlink_log 20480 0
nfnetlink 16384 2 nfnetlink_log,nfnetlink_queue
bluetooth 425984 0
bbswitch 16384 0
binfmt_misc 20480 1
Hi Rat,
Welcome to the forum. What is the error message you are receiving? What is not working? Can you use optirun glxspheres64?
Does CUDA work?
Also, modinfo nvidia-current should work
how to install graphic driver on kali linux please help me :
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
I'm going to need a lot more information than that. If you want help, post the outputs of the questions on the first page.Quote:
Originally Posted by bt5kl
But from what I can see, you don't have an NVIDIA chip set.
xD
Best to you for 2016 static! :)
Hello everyone, I beg your help. I trying to solve this problem is not the first day...
Laptop Dexp H168: both Intel and Nvidia cards (Optimus?).
When I was buying a laptop on it was installed Windows 8. So, i deleted it. The next step was installing Kali 2.0 Sana.
I made '.iso' on USB via Win32DiskImager (to my luck it works fine).
Firstly i made: "EPS" (250M bootable), "/" (100G), "swap" (2xRAM), "opt" (50G logical), "home" (650G logical).
Kali was installed and worked correctly (how i think). In "lspci | egrep 'VGA|3D'" were:
When i tried to install Nvidia drivers via:Code:00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GK108M [GeForce GT 940M] (rev 02)
I had a white screen with "Oh, No! Something....blablabla". And Kali wasn't loaded. I decided to reinstall Kali...Code:apt-get install nvidia-kernel-$(uname -r)
aptitude install nvidia-kernel-dkms
aptitude install nvidia-xconfig
When i done this (yes, i'm done this) Kali worked correctly, but in "lspci | egrep 'VGA|3D'" now:
I decided that the problem is improper installation of the drivers and decided to install Nvidia again, as it is written in the first post of this thread.Code:00:02:0 VGA compatible controller: Intel Corporation Device 191b (rev 06)
01:00:0 3D controller: NVIDIA Corporation Device 1347 (rev a2)
Before the number '9' everything goes perfectly, but then ... When i tried to 'apt-get install bumblebee-nvidia primus' the videocard's fan started to make much noise. And when this commands was executed the laptop was himself halted. When i tried to start OS i had black terminal screen:
but it was frozen and didn't react. After some time (3-5 minutes) switches itself off again. So the circle.Code:Kali GNU/Linux 2.0 Kali tty1
Kali login: __
I tried to reinstall Kali and Nvidia another 2 times, but the same.
What i should do? Variants such as "Throw your computer" will not be accepted :)
Tried to install Nvidia drivers from post #305 of this thread:
After i complete:
Videocard's fan started to rotate much, but i had managed do reboot. When i try load Kali i have the same message:Code:apt-get install bumblebee-nvidia primus
So, i entered in 'Rescue mode' and did '10' and '12' items of this.Code:Kali GNU/Linux 2.0 Kali tty1
Kali login: __
After reboot i had the next message:
and shutdown after 3-5 minutes again...Code:Kali GNU/Linux 2.0 Kali tty1
Kali login: [ 40.122326] INFO: rcu_sched detected stalls on CPUs/tasks: { 2} (detected by 0, t=5253 jiffies, g=1442, c=1441m q=836)
Would you please show me where to go? Thanks :(
Hi all & stanicn0de
I follow your totur on first page
stuck at step 15
Code:root@kali:~# optirun glxspheres64
[ 267.653858] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
[ 267.653947] [ERROR]Aborting because fallback start is disabled.
-----------------------------------------Code:root@kali:~# modinfo nvidia
modinfo: ERROR: Module nvidia not found.
lspci | egrep 'VGA|3D'
modprobe nvidiaCode:root@kali:~# lspci | egrep -i 'vga|3d'
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1)
modprobe nvidia-uvmCode:No Output
optirun glxspheres64Code:No Output
dmesg | tail -n 50Code:[ 1166.593615] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
[ 1166.593703] [ERROR]Aborting because fallback start is disabled.
echo $PATHCode:[ 24.124210] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 24.124218] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEGR.GFX0
[ 24.124235] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150818/nsarguments-95)
[ 24.124397] bbswitch: detected an Optimus _DSM function
[ 24.124413] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 24.124421] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 24.127783] bbswitch: disabling discrete graphics
[ 24.127799] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150818/nsarguments-95)
[ 24.324051] wlan0: authenticate with 02:1f:d4:04:19:b9
[ 24.338573] wlan0: send auth to 02:1f:d4:04:19:b9 (try 1/3)
[ 24.342232] wlan0: authenticated
[ 24.346262] wlan0: associate with 02:1f:d4:04:19:b9 (try 1/3)
[ 24.357030] wlan0: RX AssocResp from 02:1f:d4:04:19:b9 (capab=0x431 status=0 aid=5)
[ 24.357131] wlan0: associated
[ 24.357154] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.359861] ath: EEPROM regdomain: 0x8348
[ 24.359865] ath: EEPROM indicates we should expect a country code
[ 24.359866] ath: doing EEPROM country->regdmn map search
[ 24.359868] ath: country maps to regdmn code: 0x3a
[ 24.359869] ath: Country alpha2 being used: US
[ 24.359870] ath: Regpair used: 0x3a
[ 24.359872] ath: regdomain 0x8348 dynamically updated by country IE
[ 24.359896] cfg80211: Regulatory domain changed to country: US
[ 24.359897] cfg80211: DFS Master region: FCC
[ 24.359898] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 24.359901] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 24.359903] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 24.359905] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 24.359907] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[ 24.359909] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 24.359910] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 34.433831] fuse init (API version 7.23)
[ 36.010157] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.010167] Bluetooth: BNEP filters: protocol multicast
[ 36.010186] Bluetooth: BNEP socket layer initialized
[ 36.211345] Bluetooth: RFCOMM TTY layer initialized
[ 36.211374] Bluetooth: RFCOMM socket layer initialized
[ 36.211398] Bluetooth: RFCOMM ver 1.11
[ 266.589460] bbswitch: enabling discrete graphics
[ 267.442938] nvidia: module license 'NVIDIA' taints kernel.
[ 267.442948] Disabling lock debugging due to kernel taint
[ 267.461294] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 267.462114] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[ 267.462128] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.55 Thu Oct 8 15:18:00 PDT 2015
[ 1156.534343] nvidia_uvm: Loaded the UVM driver, major device number 246
[ 1239.776637] nvidia_uvm: Unregistered the UVM driver
[ 1239.799211] [drm] Module unloaded
[ 1239.825001] bbswitch: disabling discrete graphics
[ 1239.825018] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150818/nsarguments-95)
[ 1239.838811] pci 0000:01:00.0: Refused to change power state, currently in D0
cat /etc/bumblebee/bumblebee.confCode:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin
cat /etc/bumblebee/xorg.conf.nvidia
service bumblebeed restartCode:# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
modinfo nvidia
find 2> /dev/null / -name nvidia*.koCode:modinfo: ERROR: Module nvidia not found.
Code:/var/lib/dkms/nvidia-current/352.55/4.3.0-kali1-amd64/x86_64/module/nvidia-current.ko
/var/lib/dkms/nvidia-current/352.55/4.3.0-kali1-amd64/x86_64/module/nvidia-current-uvm.ko
/lib/modules/4.3.0-kali1-amd64/updates/dkms/nvidia-current.ko
/lib/modules/4.3.0-kali1-amd64/updates/dkms/nvidia-current-uvm.ko
Suggestion or just a little help i'll appreciate it :)
THANKS.Code:root@0b51d14n:~/NVIDIA_CUDA-7.5_Samples/1_Utilities/deviceQuery# optirun ./deviceQuery
./deviceQuery Starting...
CUDA Device Query (Runtime API) version (CUDART static linking)
Detected 1 CUDA Capable device(s)
Device 0: "GeForce 920M"
CUDA Driver Version / Runtime Version 7.5 / 7.5
CUDA Capability Major/Minor version number: 3.5
Total amount of global memory: 1024 MBytes (1073610752 bytes)
( 2) Multiprocessors, (192) CUDA Cores/MP: 384 CUDA Cores
GPU Max Clock rate: 954 MHz (0.95 GHz)
Memory Clock rate: 900 Mhz
Memory Bus Width: 64-bit
L2 Cache Size: 524288 bytes
Maximum Texture Dimension Size (x,y,z) 1D=(65536), 2D=(65536, 65536), 3D=(4096, 4096, 4096)
Maximum Layered 1D Texture Size, (num) layers 1D=(16384), 2048 layers
Maximum Layered 2D Texture Size, (num) layers 2D=(16384, 16384), 2048 layers
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Max dimension size of a thread block (x,y,z): (1024, 1024, 64)
Max dimension size of a grid size (x,y,z): (2147483647, 65535, 65535)
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 1 copy engine(s)
Run time limit on kernels: Yes
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Disabled
Device supports Unified Addressing (UVA): Yes
Device PCI Domain ID / Bus ID / location ID: 0 / 4 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 7.5, CUDA Runtime Version = 7.5, NumDevs = 1, Device0 = GeForce 920M
Result = PASS
Hi all, unfortunately I have the same issue like reintakura:
lspci | egrep 'VGA|3D'
modprobe nvidia, modprobe nvidia-uvmCode:00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 425M] (rev a1)
optirun glxspheres64Code:No Output
dmesg | tail -n 50Code:[ 3464.033594] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
[ 3464.033700] [ERROR]Aborting because fallback start is disabled.
Code:[ 11.678275] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 12.324145] Adding 7971836k swap on /dev/sda5. Priority:-1 extents:1 across:7971836k FS
[ 14.535880] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 18.918289] Bluetooth: Core ver 2.20
[ 18.918308] NET: Registered protocol family 31
[Bluetooth]
[ 18.969846] Netfilter messages via NETLINK v0.30.
[IPv6]
[wlan0]
[ 23.267068] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.270952] cfg80211: Regulatory domain changed to country: DE
[ 23.270956] cfg80211: DFS Master region: ETSI
[ 23.270958] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 23.270960] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 23.270963] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 23.270965] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 23.270966] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 23.270968] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 23.872947] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
[ 24.118613] bbswitch: version 0.8
[ 24.118621] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 24.118629] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.P0P1.PEGP
[ 24.118647] ACPI Warning: \_SB_.PCI0.P0P1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150818/nsarguments-95)
[ 24.118836] bbswitch: detected an Optimus _DSM function
[ 24.118852] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 24.118859] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 24.120831] bbswitch: disabling discrete graphics
[ 24.120845] ACPI Warning: \_SB_.PCI0.P0P1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150818/nsarguments-95)
[ 31.993462] fuse init (API version 7.23)
[Bluetooth]
[ 94.050737] bbswitch: enabling discrete graphics
[ 94.383372] nvidia: module license 'NVIDIA' taints kernel.
[ 94.383381] Disabling lock debugging due to kernel taint
[ 94.395197] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 94.396188] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[ 94.396194] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.55 Thu Oct 8 15:18:00 PDT 2015
echo $PATH
cat /etc/bumblebee/bumblebee.confCode:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin
cat /etc/bumblebee/xorg.conf.nvidiaCode:# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
service bumblebeed restartCode:Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
modinfo nvidia-currentCode:No Output
find 2> /dev/null / -name nvidia*.koCode:filename: /lib/modules/4.3.0-kali1-amd64/updates/dkms/nvidia-current.ko
alias: char-major-195-*
version: 352.55
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm
vermagic: 4.3.0-kali1-amd64 SMP mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
Thanks for your help!Code:/lib/modules/4.3.0-kali1-amd64/updates/dkms/nvidia-current-uvm.ko
/lib/modules/4.3.0-kali1-amd64/updates/dkms/nvidia-current.ko
/var/lib/dkms/nvidia-current/352.55/4.3.0-kali1-amd64/x86_64/module/nvidia-current-uvm.ko
/var/lib/dkms/nvidia-current/352.55/4.3.0-kali1-amd64/x86_64/module/nvidia-current.ko
Quote:
Originally Posted by reintakura
Bumblebee pkg needed to be updated to work with new Xorg.Quote:
Originally Posted by Bobbybaum
I have solved problem by changing Xorg path in bumblebee.
Uncomment source repo in /etc/apt/sources.list and do:
Code:apt-get update
apt-get install devscripts
apt-get build-dep bumblebee
apt-get source bumblebee
sed -i 's/\"Xorg\"/\"\/usr\/lib\/xorg\/Xorg\"/' bumblebee-3.2.1/src/bbsecondary.h
cd bumblebee-3.2.1/
dpkg-buildpackage -us -uc -nc
dpkg -i ../bumblebee_3.2.1-10_amd64.deb
service bumblebeed restart
Quote:
Originally Posted by reintakura
Bumblebee pkg needed to be updated to work with new Xorg.Quote:
Originally Posted by Bobbybaum
I have solved problem by changing Xorg path in bumblebee.
Uncomment source repo in /etc/apt/sources.list and do:
Code:apt-get update
apt-get install devscripts
apt-get build-dep bumblebee
apt-get source bumblebee
sed -i 's/\"Xorg\"/\"\/usr\/lib\/xorg\/Xorg\"/' bumblebee-3.2.1/src/bbsecondary.h
cd bumblebee-3.2.1/
dpkg-buildpackage -us -uc -nc
dpkg -i ../bumblebee_3.2.1-10_amd64.deb
service bumblebeed restart
how to install graphic on lenovo l510 (thinkpad) Lenovo Mobile Intel® GM45 Express Chipset
root@BT5KL:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
02:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
05:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
Hoping someone can help here. Desktop system with 64-bit Kali 2.0 Rolling installed to HDD.
When running(as root) the CUDA install, I get the following output:
So, the error seems pretty obvious that I do not have the correct compiler, but how should I find the correct one?Code:chmod +x cuda_7.5.18_linux.run
./cuda_7.5.18_linux.run
Accept the EULA
Select yes to unsupported configuration
No to graphics driver
Yes to the toolkit
Accept default location
Yes to symbolic link
Yes to samples
Yes to default samples location
The toolkit will install
ERROR:
Error: unsupported compiler: 5.3.1. Use –override to override this check.
Missing recommended library: libGLU.so
Missing recommended library: libXi.so
Missing recommended library: libXmu.so
Error: Cannot find Toolkit in /usr/local/cuda-7.5
I did install all the CUDA dependencies:
Any help is much appreciated!Code:apt-get install freeglut3-dev libxmu-dev libpcap-dev libssl-dev
Hi int0xcc!Quote:
Originally Posted by int0xcc
I am most grateful for your post.
I have spend more than 3 days on this problem without success. I even opened a thread here:
https://forums.kali.org/showthread.p...inkpad-Yoga-15
Your instructions solved the problem right on the the first attempt. I am going to test them on other distros too.
I will post your instructions on the above mentioned thread.
Thank you very very much again
DinoS
Could you tell me how to solve 32bit system ?Quote:
Originally Posted by int0xcc
my problem is as followed
[14632.189140] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
[14632.189164] [ERROR]Aborting because fallback start is disabled.
Tx/Rx >>>
apt-get install freeglut3-dev build-essential libx11-dev libxmu-dev libxi-dev libgl1-mesa-glx libglu1-mesa libglu1-mesa-dev
./cuda*.run --override compiler
Accept the EULA
Select yes to unsupported configuration
No to graphics driver
Yes to the toolkit
Accept default location
Yes to symbolic link
Yes to samples
Yes to default samples location
The toolkit will install
I have a problem guys. I can succesfully run optirun glxspheres64 but modinfo nvidia says that I don't have nvidia module installed
1. lspci | egrep 'VGA|3D
2. modprobe nvidiaCode:00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1)
3. modprobe nvidia-uvmCode:modprobe: FATAL: Module nvidia not found in directory /lib/modules/4.4.0-kali1-amd64
4. optirun glxspheres64Code:modprobe: FATAL: Module nvidia-uvm not found in directory /lib/modules/4.4.0-kali1-amd64
5. dmesg | tail -n 100Code:Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: GeForce GT 750M/PCIe/SSE2
306.941638 frames/sec - 342.546869 Mpixels/sec
305.789812 frames/sec - 341.261430 Mpixels/sec
310.069638 frames/sec - 346.037716 Mpixels/sec
308.716589 frames/sec - 344.527713 Mpixels/sec
6. echo $PATHCode:[ 296.115287] nvidia: module license 'NVIDIA' taints kernel.
[ 296.115290] Disabling lock debugging due to kernel taint
[ 296.123083] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[ 296.123087] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
[ 297.819878] vgaarb: this pci device is not a vga device
[ 297.841735] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.841774] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.841797] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.841818] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.841840] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.841860] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.841893] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.841915] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 297.865676] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 298.059827] vgaarb: this pci device is not a vga device
[ 306.727138] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.063360] vgaarb: this pci device is not a vga device
[ 531.065402] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065441] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065464] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065486] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065507] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065528] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065560] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065581] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.065964] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 531.254516] vgaarb: this pci device is not a vga device
[ 541.237741] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
7. cat /etc/bumblebee/bumblebee.confCode:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/opt/oracle/instantclient_11_2:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin
8. cat /etc/bumblebee/xorg.conf.nvidiaCode:# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
9. service bumblebeed restartCode:Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
Restarted succesfully
10. modinfo nvidia
11. find 2> /dev/null / -name nvidia*.koCode:modinfo: ERROR: Module nvidia not found
EDIT: I get PASS with CUDA deviceQueryCode:/var/lib/dkms/nvidia-current/352.79/4.4.0-kali1-amd64/x86_64/module/nvidia-current.ko
/var/lib/dkms/nvidia-current/352.79/4.4.0-kali1-amd64/x86_64/module/nvidia-current-uvm.ko
/lib/modules/4.4.0-kali1-amd64/updates/dkms/nvidia-current.ko
/lib/modules/4.4.0-kali1-amd64/updates/dkms/nvidia-current-uvm.ko
Hello guys, can you tell me if there is any new guide, to install nvidia + cuda, in gtx 950m? Cause after 1º attempt... i lost and needed to re-install kali.
Thanks in advance
As Millesaway said is it any update for the tutorial ? I have the latest Kali 2016, but it seems I can't install NVIDIA. I've tried many things I found over the internet but I was wondering if someone can post an updated tutorial.Quote:
Originally Posted by Millesaway
Same, I've followed the steps of this tutorial and many others with no luck so far. It would be great if someone that knew how to get Nvidia Cards with Optimus working with Kali could post an updated tutorial.Quote:
Originally Posted by Razvan
I got to step 15 but couldn't get optirun to work.
In the guide it doesn't look like we are disabling nouveau anywhere, shouldn't this cause a conflict with the Nvidia driver loading?
Code:root@DEFNOTKALI:~# lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK104M [GeForce GTX 870M] (rev a1)
Code:root@DEFNOTKALI:~# modprobe nvidia
Code:root@DEFNOTKALI:~# modprobe nvidia-uvm
Code:root@DEFNOTKALI:~# optirun glxspheres64
[ 146.023065] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[ 146.023114] [ERROR]Could not connect to bumblebee daemon - is it running?
Code:root@DEFNOTKALI:~# /etc/init.d/bumblebeed start
[ ok ] Starting bumblebeed (via systemctl): bumblebeed.service.
Code:root@DEFNOTKALI:~# optirun glxspheres64
[ 166.013170] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
[ 166.013201] [ERROR]Aborting because fallback start is disabled.
Code:root@DEFNOTKALI:~# dmesg | tail -n 100
[ 8.332790] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 8.333960] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 8.333964] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 8.333968] ACPI Error: Method parse/execution failed [\_SB.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8802270e2220), AE_NOT_FOUND (20150930/psparse-542)
[ 8.334106] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:5e/LNXVIDEO:00/input/input16
[ 8.335503] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.335609] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17
...
[ 8.373529] intel_rapl: Found RAPL domain package
...
[ 8.373580] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 8.396062] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 8.540116] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.540124] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 8.553731] fbcon: inteldrmfb (fb0) is primary device
[ 8.587479] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 8.599189] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 8.599255] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 8.599310] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 8.865906] Netfilter messages via NETLINK v0.30.
[ 9.768266] Console: switching to colour frame buffer device 400x112
[ 9.776747] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 17.625014] fuse init (API version 7.23)
[ 132.106742] nvidia: module license 'NVIDIA' taints kernel.
[ 132.106746] Disabling lock debugging due to kernel taint
[ 132.114807] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 132.114995] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[ 132.114998] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
[ 138.579100] nvidia_uvm: Loaded the UVM driver, major device number 247
[ 163.380537] bbswitch: version 0.8
[ 163.380544] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 163.380549] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 163.380560] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 163.380653] bbswitch: detected an Optimus _DSM function
[ 163.380667] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 163.383584] nvidia_uvm: Unregistered the UVM driver
[ 163.400337] [drm] Module unloaded
[ 163.437393] bbswitch: disabling discrete graphics
[ 163.437408] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 163.452106] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 165.457270] bbswitch: enabling discrete graphics
[ 166.007073] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[ 166.007077] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
Code:root@DEFNOTKALI:~# echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin
Code:root@DEFNOTKALI:~# cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Code:root@DEFNOTKALI:~# cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
Code:root@DEFNOTKALI:~# service bumblebeed restart
Code:root@DEFNOTKALI:~# modinfo nvidia
modinfo: ERROR: Module nvidia not found.
Code:root@DEFNOTKALI:~# find 2> /dev/null / -name nvidia*.ko
/var/lib/dkms/nvidia-current/352.79/4.4.0-kali1-amd64/x86_64/module/nvidia-current.ko
/var/lib/dkms/nvidia-current/352.79/4.4.0-kali1-amd64/x86_64/module/nvidia-current-uvm.ko
/lib/modules/4.4.0-kali1-amd64/updates/dkms/nvidia-current.ko
/lib/modules/4.4.0-kali1-amd64/updates/dkms/nvidia-current-uvm.ko
Here we're back again.
After installing the last Kali version (2016.1), I'm finding impossible to install the nVidia drivers with the guide in the first post: simply, like other users said, the guide is not applying from the step 15.
Someone found a way to make Kali work with those **** graphic drivers?
So after 4 clean installs of Kali 2016 and two days trying to get this working. I was able to get the nvidia drivers installed on my laptop. I use some of the steps from this thread and some from http://fixmynix.com/install-and-conf...bee-in-debian/. At first I was getting:
Tried something else, then I got:Quote:
root@KALI:~# optirun glxspheres64
[ 146.023065] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[ 146.023114] [ERROR]Could not connect to bumblebee daemon - is it running?
Finally got it to work and the following is a history of the commands I ended up using. For virtualgl and Cuda this assumes you downloaded from the links in the first post and the files are located in your Downloads folder.Quote:
root@DEFNOTKALI:~# optirun glxspheres64
[ 166.013170] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
Created /etc/modprobe.d/nouveau-blacklist.conf and added "blacklist nouveau" with out quotesQuote:
apt-get update
apt-get upgrade
apt-get dist-upgrade
apt-get update
apt-get upgrade
modprobe -r nouveau
modprobe -r vga_switcheroo
apt-get install gcc make linux-headers-$(uname -r)
apt-get install dksm bbswitch-dkms
apt-get install dkms bbswitch-dkms
modprobe bbswitch load_state=0
Added "bbswitch load_state=0" with out quotes to /etc/modulesQuote:
nano /etc/modprobe.d/nouveau-blacklist.conf
Quote:
nano /etc/modules
Uncommented BusID "PCI:01:00:0" and replace the 1 with the number you get from lspciQuote:
apt-get install nvidia-kernel-dkms nvidia-xconfig nvidia-settings
apt-get install nvidia-vdpau-driver vdpau-va-driver mesa-utils
apt-get install bumblebee-nvidia
sudo dpkg -i /root/Downloads/virtualgl_2.5_amd64.deb
usermod -aG bumblebee $USER
service bumblebeed restart
apt-get install devscripts
apt-get build-dep bumblebee
apt-get source bumblebee
sed -i 's/"Xorg"/"\/usr\/lib\/xorg\/Xorg"/' bumblebee-3.2.1/src/bbsecondary.h
bumblebee-3.2.1/
dpkg-buildpackage -us -uc -nc
dpkg -i ../bumblebee_3.2.1-10_amd64.deb
service bumblebeed restart
reboot
Quote:
nano /etc/bumblebee/xorg.conf.nvidia
Add "export PATH=$PATH:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin" to the end of .bashrc without quotes.Quote:
service bumblebeed restart
optirun -v -b virtualgl -c jpeg glxgears
apt-get install freeglut3-dev libxmu-dev libpcap-dev
Quote:
nano ~/.bashrc
Make sure this lines exist if not add to match in /etc/ld.so.confQuote:
export PATH=$PATH:/opt/VirtualGL/bin:/usr/local/cuda-7.5/bin
optirun -v -b virtualgl -c jpeg glxgears
optirun -vv glxgears
chmod +x Downloads/cuda_7.5.18_linux.run
./Downloads/cuda_7.5.18_linux.run --override compiler
include /etc/ld.so.conf.d/*.conf
/usr/local/cuda-7.5/lib64
Quote:
nano /etc/ld.so.conf
Hope this is of use to some you that have been having problems.Quote:
ldconfig
apt-get install libcuda1
cd /root/NVIDIA_CUDA-7.5_Samples/1_Utilities/deviceQuery/
make
optirun ./deviceQuery
Thanks for sharing acostagera :cool:
Side note: This thread is going on its second year and I still can't believe how much of a circus it is to install a driver and related GPU acceleration programs. For you nVidia/oclHashcat/Windows users, here is a mini howtoo, because sometimes it's better to switch OS for certain operations, rather than checking-in a nuthouse.
- Download and install CUDA,
https://developer.nvidia.com/cuda-downloads
(That will also install the version compatible nVidia driver).
- Download Hashcat GUI,
https://hashkiller.co.uk/hashcat-gui.aspx
No install. Decompress in C: inside a folder named 'HashcatGUI'
C:\HashcatGUI
- Download oclHashcat
http://hashcat.net/oclhashcat/
No install. Decompress inside the previously created 'HashcatGUI' folder.
C:\HashcatGUI\cudaHashcat-2.01
- Place your desired .cap file inside the cap2hccap folder and rename it 'wpa.cap'
C:\HashcatGUI\cap2hccap\wpa.cap
- Start App.HashcatGUI.exe
C:\HashcatGUI\App.HashcatGUI.exe
Hash File > Click on '...' and navigate to C:\HashcatGUI\cap2hccap\, and select your 'wpa.cap'. That will automatically create a hccap file.
C:\HashcatGUI\cap2hccap\wpa.hccap
- See '7 Hashcat GUI setup.jpg' for the rest of options.
Attachment 1405
* Once the main Hashcat/oclHashcat interface setup, Commands > Generate, to see the resulting command line!!
* [Ctrl]+[C] in the CMD window to stop at any time.
thx for sharing your findings acostagera. After struggling 2 days with exactly the same problems this saved my day :)
Now i'm stuck on adding CUDA support by building CPyrit. Following step 3 of the first post. gcc-5 isn't supported. It gives me below output:
Is there any way to build CPyrit with another gcc-version?
Quote:
root@kali:/home/pyrit_svn/cpyrit_cuda# python setup.py build
running build
running build_ext
Compiling CUDA module using nvcc 7.5, V7.5.17...
Executing '/usr/local/cuda/bin/nvcc -m64 --host-compilation C -Xcompiler "-fPIC" --ptx ./_cpyrit_cudakernel.cu'
nvcc warning : option 'host-compilation' has been deprecated
In file included from /usr/local/cuda/bin/..//include/cuda_runtime.h:76:0,
from <command-line>:0:
/usr/local/cuda/bin/..//include/host_config.h:115:2: error: #error -- unsupported GNU version! gcc versions later than 4.9 are not supported!
#error -- unsupported GNU version! gcc versions later than 4.9 are not supported!
Edit (fix)
To prevent this error just uncomment line 115 in: /usr/local/cuda/include/host_config.h
Now the GPU will be recognized using:Quote:
//#error -- unsupported GNU version! gcc versions later than 4.9 are not supported!
Quote:
optirun pyrit benchmark
Quote:
root@kali:~/cpyrit-cuda-0.4.0# optirun pyrit benchmark
Pyrit 0.4.0 (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3+
Running benchmark (28184.1 PMKs/s)... -
Computed 28184.12 PMKs/s total.
#1: 'CUDA-Device #1 'GeForce GTX 860M'': 27098.4 PMKs/s (RTT 2.8)
#2: 'CPU-Core (SSE2)': 489.2 PMKs/s (RTT 3.2)
#3: 'CPU-Core (SSE2)': 494.4 PMKs/s (RTT 3.2)
#4: 'CPU-Core (SSE2)': 504.2 PMKs/s (RTT 3.2)
#5: 'CPU-Core (SSE2)': 503.8 PMKs/s (RTT 3.2)
#6: 'CPU-Core (SSE2)': 496.8 PMKs/s (RTT 3.2)
#7: 'CPU-Core (SSE2)': 498.6 PMKs/s (RTT 3.2)
#8: 'CPU-Core (SSE2)': 500.7 PMKs/s (RTT 3.2)
root@kali:~/cpyrit-cuda-0.4.0#
I tried with your mini-guide, but still no luck for me, acostagera: the infamousQuote:
Originally Posted by acostagera
error is still getting me.Code:[ 816.077860] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
[ 816.077915] [ERROR]Aborting because fallback start is disabled.
I have restarted bumblebeed. Included code before restartCode:root@kali:~# lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation Device 22b1 (rev 21)
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce 920M] (rev a1)
root@kali:~# modprobe nvidia
root@kali:~# modprobe nvidia-uvm
http://pastebin.com/gBAKijSfCode:root@kali:~# optirun glxspheres64
[ 7543.790109] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[ 7543.790269] [ERROR]Could not connect to bumblebee daemon - is it running?
root@kali:~# service bumblebeed restart
root@kali:~# optirun glxspheres64
[ 6973.249397] [ERROR]Cannot access secondary GPU - error: [XORG] (EE)
[ 6973.249733] [ERROR]Aborting because fallback start is disabled.
rest of output
I have done everything as said until "run optirun glxspheres64", which shown me error right up there.
Quote:
Originally Posted by Walrix
Code:gedit /etc/bumblebee/bumblebee.conf
change VirtualDisplay=:8 to VirtualDisplay=:0
Hey
I am getting error while running the command "modinfo nvidia"
Below is the error:
root@babc:~# modprobe nvidia
modprobe: ERROR: ../libkmod/libkmod-module.c:809 kmod_module_insert_module() could not find module by name='nvidia'
modprobe: ERROR: could not insert 'nvidia': Function not implemented
root@abc:~# modprobe nvidia-uvm
modprobe: FATAL: Module nvidia-uvm not found.
Please let me know how to proceed. I am stuck with this issue.
Thanks
Hey guys i do encounter a problem with my CUDA installation everything seems to work fine but /usr/local/cuda-7.5 is not there also examples and such are missing. optirun gives me output but i have to restart bumblebeed service in every reboot. So my first question is to resolve bumblebeed service problem and second is about CUDA output given below whether or not it is a problem.
Code:-------------------------------------------------------------
Do you accept the previously read EULA? (accept/decline/quit): accept
You are attempting to install on an unsupported configuration. Do you wish to continue? ((y)es/(n)o) [ default is no ]: yes
Install NVIDIA Accelerated Graphics Driver for Linux-x86_64 352.39? ((y)es/(n)o/(q)uit): no
Install the CUDA 7.5 Toolkit? ((y)es/(n)o/(q)uit): yes
Enter Toolkit Location [ default is /usr/local/cuda-7.5 ]:
Do you want to install a symbolic link at /usr/local/cuda? ((y)es/(n)o/(q)uit): y
Install the CUDA 7.5 Samples? ((y)es/(n)o/(q)uit): y
Enter CUDA Samples Location [ default is /root ]: /usr/share/CUDA/
Error: unsupported compiler: 6.1.1. Use --override to override this check.
Missing recommended library: libXi.so
Error: cannot find Toolkit in /usr/local/cuda-7.5
===========
= Summary =
===========
Driver: Not Selected
Toolkit: Installation Failed. Using unsupported Compiler.
Samples: Cannot find Toolkit in /usr/local/cuda-7.5