Search:

Type: Posts; User: steev

Page 1 of 6 1 2 3 4

Search: Search took 0.02 seconds.

  1. You need to enable the service with systemctl...

    You need to enable the service with systemctl enable chrony - then either reboot, or start it manually with systemctl start chrony.
  2. Bash creates the file, based on your settings in...

    Bash creates the file, based on your settings in .bashrc it's not created or owned by any package in and of itself, it's just a recorded history of your bash commands.
  3. Try need to run apt update first, so that it...

    Try need to run apt update first, so that it updates the repos to what are latest.


    root@kali:~# apt updateHit:1 http://http.kali.org/kali kali-rolling InRelease
    Hit:2...
  4. The raspberrypi does not have a hardware clock,...

    The raspberrypi does not have a hardware clock, unless you purchase some sort of rtc/rtc hat for it. I would suggest installing the package "chrony" and enabling the service.
  5. Replies
    7
    Views
    145

    You need to update and reboot. Your kernel is...

    You need to update and reboot. Your kernel is out dated, and we do not have headers available for that kernel anymore.
  6. I can't reproduce this here; Although for me, the...

    I can't reproduce this here; Although for me, the internal wifi card is wlan0 not wlan1.

    I run airmon-ng start wlan0 which creates wlan0mon and then I run airodump-ng --band abg wlan0mon and...
  7. Replies
    7
    Views
    145

    Yes, you need to be updated to the latest...

    Yes, you need to be updated to the latest packages. Also, you should probably try the realtek-rtl8188eus-dkms package (which is what that GitHub provides) - but again, you'll need to be updated...
  8. Replies
    1
    Views
    40

    Assuming you're talking about WSL, the Downloads...

    Assuming you're talking about WSL, the Downloads folder in Windows is mounted at /mnt/c/Users/(YOURWINDOWSUSERNAME)/Downloads
  9. I can't reproduce the issue here at all. ...

    I can't reproduce the issue here at all.

    It's possible you somehow have/got the wrong firmware, due to a misstep with enabling them in the metapackages. You could try running `apt install...
  10. Replies
    7
    Views
    145

    Did you follow the full instructions? ...

    Did you follow the full instructions? Specifically the part where it says Package / Build dependencies (Kali) under Notes?
  11. Thread: Usbarmory mk2

    by steev
    Replies
    3
    Views
    80

    I do not have a usbarmory mk2 so I do not know...

    I do not have a usbarmory mk2 so I do not know what is different between the mk1 and mk2. Pull requests are certainly welcome to add support if the image doesn't work despite their wiki page saying...
  12. An upgrade does not create a new account, you...

    An upgrade does not create a new account, you would need to do that manually via adduser (make sure to add the user to the kali group as well as others) - or do a fresh installation to have it...
  13. Replies
    14
    Views
    4,561

    Does dmesg show any output when you connect the...

    Does dmesg show any output when you connect the phone? It's possible that there isn't a device driver for whatever your phone is showing up as to the rpi, but we won't know without that output.
  14. cmake exists - you'll want to run apt update...

    cmake exists - you'll want to run apt update before running their installer - but, they're expecting the drivers to be run on a 32bit system; you're either going to have to go through that installer...
  15. You need to use "sudo" before commands that...

    You need to use "sudo" before commands that require elevated privileges (like apt) on the command line, and enter the "chris" user's password. There is no kali user on an installation, it is only...
  16. Replies
    1
    Views
    58

    The kernel sources do not go in to...

    The kernel sources do not go in to /usr/local/src, they typically go into /usr/src when in a package. When you say you've installed "re4son's kalipi for rpib3+" - what package are you installing? ...
  17. Replies
    2
    Views
    139

    The live image has the firmware installed,...

    The live image has the firmware installed, unfortunately, it wasn't added to the metapackages until after release. If 2019.4 works for you, you can always install and then do an apt update && apt...
  18. Replies
    4
    Views
    148

    Did you run build-deps.sh like it says?

    Did you run build-deps.sh like it says?
  19. Replies
    4
    Views
    148

    As noted in the blog post, you will need to build...

    As noted in the blog post, you will need to build the image yourself.

    On a Kali x86/x86_64 installation, clone the repository


    git clone https://gitlab.com/kalilinux/build-scripts/kali-arm...
  20. Replies
    4
    Views
    196

    It's looking for a cpuflag in cpuinfo that isn't...

    It's looking for a cpuflag in cpuinfo that isn't there. That's really not a great way to check if it's 32bit or 64bit, all it actually shows is whether or not that cpuflag exists.
  21. Replies
    4
    Views
    196

    This is because you're searching for an x86_64...

    This is because you're searching for an x86_64 cpuflag in /proc/cpuinfo, which... does not exist on arm64/aarch64. Unfortunately, there isn't a cpuinfo flag that specifies 64bit on arm64.

    There...
  22. Replies
    1
    Views
    147

    Does it do this every time? It's possible it was...

    Does it do this every time? It's possible it was attempting to resize the fs while still doing some other work in the background. Was everything okay after a reboot?
  23. Replies
    1
    Views
    88

    This is better posted to bugs.kali.org as a...

    This is better posted to bugs.kali.org as a package update/feature request.
  24. The kernel headers package for the RaspberryPi...

    The kernel headers package for the RaspberryPi kernels is called something like kalipi-kernel-headers - if you do an `apt search kalipi-` it should be pretty easy to pick out which one it is.
  25. Replies
    1
    Views
    236

    The torrent file is a file you load in a...

    The torrent file is a file you load in a torrenting client, and it will download the iso. The other download link is the ISO file just like always.
  26. Replies
    1
    Views
    658

    You have some extra files in...

    You have some extra files in /etc/apt/sources.list.d that point to other repositories.

    The thing that sticks out the most those is the "1386" - that should be "i386" - an i not a 1. As for the...
  27. I was more pointing out what is happening on the...

    I was more pointing out what is happening on the first boot; I'm not sure why the rpi4 would react like that - which edition do you have?

    I haven't seen that happen with my rpi4(4GB) here, so I'm...
  28. The first boot has to do a few things mostly due...

    The first boot has to do a few things mostly due to an issue with Qemu, glibc and ext4 file systems (the host that builds the image) - these are done in...
  29. You probably want to use the "equivs" package,...

    You probably want to use the "equivs" package, and create a fake tightvncserver package, and install it, which would placate the kali-linux-all installation wanting tightvncserver.

    You can read...
  30. Replies
    2
    Views
    772

    Sounds like the sdcard has gotten corrupted......

    Sounds like the sdcard has gotten corrupted... can you run fsck on a different machine? Not a whole lot we can do here, unfortunately. If the checksum error keeps happening it could be the sdcard...
  31. Replies
    4
    Views
    1,341

    At the moment, we do not have one out. The...

    At the moment, we do not have one out. The initial tests didn't boot correctly, but we're working on it, and it'll be on the downloads page as soon as we've had a chance to test it and make sure it...
  32. So, the detection is correct, the firmware that a...

    So, the detection is correct, the firmware that a 43438 uses is named 43430... I don't think we actually include the nexmon patched firmware for it though; there are a number of different revisions...
  33. The Dell Chromebook 11 is an Intel Celeron...

    The Dell Chromebook 11 is an Intel Celeron machine, not an ARM device, so the way I do the ARM ones won't work. You would probably want to look into something like the instructions to install Arch...
  34. So are things working now for you, or not...

    So are things working now for you, or not working? I'm not quite clear based on your message whether you're all set, or still having issues.
  35. .net core *should* be accessible, however, the...

    .net core *should* be accessible, however, the build system for it is..... convoluted. That said... the version you need will depend on what image you are using. If you're using the typical...
  36. systemctl enable bluetooth only enables it next...

    systemctl enable bluetooth only enables it next boot, you need to
    systemctl start bluetooth otherwise it won't start until the next boot.

    Also note that the rpi image itself does not install the...
  37. Replies
    6
    Views
    1,772

    The easiest way to install a desktop is to use...

    The easiest way to install a desktop is to use one of the meta packages that we have set up already. It will get you most of the way there typically. First off, I'm going to *highly* recommend...
  38. Thanks for the report, I can confirm the issue...

    Thanks for the report, I can confirm the issue here. Unfortunately the 64bit image for the RPi3 is considered experimental, as the kernel itself isn't the most stable. Can you reproduce the issue...
  39. Someone was in the IRC channel and ran into a...

    Someone was in the IRC channel and ran into a similar issue (perhaps it was you?)

    The second link you have there, the 2wcTsVm, has a patch at the very bottom - this should be applied to...
  40. That's a good question as to why it won't work. ...

    That's a good question as to why it won't work. What did you change the command line to add? You may need to go through and build the graphics into the kernel, I believe I have them as a module...
  41. Thread: remove nouveau

    by steev
    Replies
    1
    Views
    918

    You would probably need to generate a custom iso...

    You would probably need to generate a custom iso installing the Nvidia drivers. Following https://docs.kali.org/development/live-build-a-custom-kali-iso

    You definitely want to read through that,...
  42. A lot of the tools won't work properly because...

    A lot of the tools won't work properly because WSL still doesn't have raw sockets (iirc) - that said, I do like it overall, in that, I can run various utilities and even compile software just fine on...
  43. Replies
    6
    Views
    6,039

    The image is experimental in that, things will...

    The image is experimental in that, things will break - if you have to have a 100% working image, I would suggest you stick with the 32bit image for now.

    Firefox is a known issue unfortunately, and...
  44. Replies
    8
    Views
    679

    You could always download the various tools and...

    You could always download the various tools and try to install them on devuan. We (Kali) have no plans currently to move to using Devuan as a base instead of Debian.
  45. Replies
    3
    Views
    1,518

    I do not have any 128GB SD cards, so I haven't...

    I do not have any 128GB SD cards, so I haven't tried that. Can/have you tried with the 2018.4 image?
  46. Replies
    10
    Views
    6,819

    Can you expand on what you mean by the screen...

    Can you expand on what you mean by the screen goes blank? That often happens due to the settings of XFCE to blank the screen/lock it - however I've noticed that occasionally it will crash and so you...
  47. Not all external hard drives can be used to boot,...

    Not all external hard drives can be used to boot, it depends on the device unfortunately. Have you searched the net to see if your hard drive supports being a boot device (other people mentioning...
  48. The issue seems to be related to...

    The issue seems to be related to fontconfig/libfontconfig1 but if you downgrade them, they'll fail to install because the previous version had issues with empty folders.

    Probably better to open a...
  49. Replies
    3
    Views
    677

    If you mean https://github.com/samaaron/sonic-pi...

    If you mean https://github.com/samaaron/sonic-pi it looks like it's still active - or is this a different project with the same name?

    Unfortunately, I do not have the free time to look through an...
  50. Replies
    3
    Views
    677

    What changes did you make? ssh is enabled by...

    What changes did you make? ssh is enabled by default on the rpi3, and the default sshd_config that we use in kali enables listening on all devices.
Results 1 to 50 of 276
Page 1 of 6 1 2 3 4