Search:

Type: Posts; User: RChadwick

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. After using it for a number of days, I'm sad to...

    After using it for a number of days, I'm sad to report there's issues. I was trying to narrow it down, but not being able to ctrl-c makes it more difficult. After days of trying I was only able to...
  2. TWRP makes sense. Too much on my mind, I didn't...

    TWRP makes sense. Too much on my mind, I didn't think to try it. A script might make things more convenient, especially if there's frequent updates, but it should be easy enough with TWRP.
  3. That's basically what I did. I couldn't copy it...

    That's basically what I did. I couldn't copy it directly, so I used the ADB commands from the makefile. I still haven't figured out the CTRL-C issue.
    Also, I haven't tested it thorough enough to say...
  4. Thanks for the clues. I run linux in a VM, and...

    Thanks for the clues. I run linux in a VM, and didn't feel like figuring out how to connect the phone, so I looked through the code and duplicated the ADB commands, and finally got it installed. It...
  5. Thanks for the info, I learn something new every...

    Thanks for the info, I learn something new every day :)

    When I do . monstart-nh, I get:
    _nex_driver_io: error
    _nex_driver_io: error

    EDIT: I rebooted, and it didn't give the error. However,...
  6. With the dot, I get 'Command not found'.

    With the dot, I get 'Command not found'.
  7. OK, I installed, renamed fw_bcmdhd.bin.nexmon to...

    OK, I installed, renamed fw_bcmdhd.bin.nexmon to fw_bcmdhd.bin, and put it in /etc/firmware. I no longer get an error when running monstart-nh, but it's not going in to monitor mode.

    EDIT: I tried...
  8. Thanks! I'm installing now. What do I do with the...

    Thanks! I'm installing now. What do I do with the Nexmon firmware?
  9. :) Also, while I don't want to get too OT, I...

    :)
    Also, while I don't want to get too OT, I have a question about your kernel for 'Atom Tablets' on your website. The link goes to the kali-pocket. Will that image work on most Atom tablets? Or...
  10. Yes!!!!!!!

    Yes!!!!!!!
  11. Thanks for the response, but this is about...

    Thanks for the response, but this is about internal wifi, not an external adapter.
  12. Despite installing the latest Nethunter multiple...

    Despite installing the latest Nethunter multiple times, I haven't found evidence of Nexmon. Does the latest Nethunter instead work with the new Nexmon app available on the new Nethunter app store?
  13. Thanks for checking!

    Thanks for checking!
  14. Does the latest Nethunter still include Nexmon...

    Does the latest Nethunter still include Nexmon drivers? Or do I need the 2017 Binkybear build?
  15. Lost monitor mode on Nexus 5 after installing 2020.1

    I had an older version of Nethunter on my Nexus 5, maybe 2017. Besside worked fine with internal Wifi. After upgrading to 2020.1, it's no longer working. Source monstart-nh now gives a 'No such file...
  16. Just as an update, I've given up installing Kali...

    Just as an update, I've given up installing Kali on an Atom tablet. Hopefully someone creates a multi-arch install. Otherwise, Backbox works fine.
  17. Another update... I downloaded BackBox, ran...

    Another update...
    I downloaded BackBox, ran Isorespin.sh on it, and installed it. This didn't work completely, leaving me at a grub prompt. I entered these commands in, and got Backbox to boot.
    ...
  18. As an update, after installing Kali while trying...

    As an update, after installing Kali while trying to leave the EFI partition, I got a grub prompt. I entered this:
    set root=(hd0,gpt2)
    linux /boot/vmlinuz-5.4.0-kali4-amd64 root=dev/mmcblk1p1...
  19. Installing Kali on a Bay Trail device with 32 bit EFI

    I originally hoped this would be a how-to post, but I'm still trying to figure out how to. There are a number of threads going back 5 years, and there's even a few websites with step by step...
  20. Replies
    67
    Views
    74,493

    I'm glad it's working for you. When I get to the...

    I'm glad it's working for you.
    When I get to the grub-install, I get these errors-
    sudo grub-install /dev/mmcblk1
    installing for i386-efi platform
    grub-install Warning Cannot set EFI Variable...
  21. Replies
    67
    Views
    74,493

    After more research, this problem, at least for...

    After more research, this problem, at least for me, may be because of the Bay Trail Atom in my tablet. A number of people have had problems installing any Linux on these machines. It seems related to...
  22. Replies
    67
    Views
    74,493

    I have the same issue Installing Kali. I'm...

    I have the same issue Installing Kali. I'm installing on a Winbook TW802. It originally had Windows on it, and I have no desire to dual boot. I was encouraged that deleting the .efi file changed...
  23. Installing on an Atom tablet with no Ethernet

    I've been trying to install the latest Kali on a Winbook tablet (2GB, Atom). I have a 4 port USB hub, with a keyboard, mouse, and install USB. At a certain point, it says I need non-free drivers for...
  24. Replies
    0
    Views
    211

    Installing Nethunter on an LG G Pad

    I'm sure there's a reason, but i'm surprised there hasn't been any attempt to port Nethunter to one of these. Most have full size USB ports, making it ideal for a Wifi Adapter.
  25. As an update, monitor mode is working fine for...

    As an update, monitor mode is working fine for me, and I'm using Besside. It is the latest Wifite that has an issue. This is of course with blinkybear.
  26. Thanks. I'm using the same. I'm suspecting it's a...

    Thanks. I'm using the same. I'm suspecting it's a wifite issue.
  27. Ok, I installed a fresh 2019.1 (I skipped it as I...

    Ok, I installed a fresh 2019.1 (I skipped it as I found Bluetooth issues with it earlier), and followed the steps I outlined. I get the exact same errors. It does appear hostapd is missing, but it...
  28. Thanks for the response! When I use your...

    Thanks for the response!
    When I use your commands in the same window, I get the same 'Too many values to unpack' error. I've installed Nethunter 10 different times in 5 different way on this phone....
  29. Finding a way to run a Raspberry Pi headless wirelessly

    I thought this would be easy, but after days I'm no closer to a solution. I'm using the kali-linux-2018.4-rpi0w-nexmon.img on a Raspberry Pi0W. The three basic ways I can think of to access a Pi...
  30. I believe it's included in Nethunter.

    I believe it's included in Nethunter.
  31. My impression was the internal Wifi on the Nexus...

    My impression was the internal Wifi on the Nexus 5 was supported, with Nexmon.
  32. Wifite on Nexus 5 fails at setting monitor mode

    I just installed NethunterOS, and Wifite fails at the monitor mode stage. If I set monitor mode first with start monstart-nh, wifite immediately fails with:

    Looking for wireless interfaces......
  33. Replies
    7
    Views
    1,586

    Thanks for the help. I've flashed new images, and...

    Thanks for the help. I've flashed new images, and updates are good now.
  34. Replies
    0
    Views
    633

    Bluetooth Serial TTY

    I have followed a number of older setups, and I'm able to log in to my headless Kali with a Bluetooth serial connection, but I'm still having issues. As re4son has integrated so much functionality, I...
  35. Replies
    7
    Views
    1,586

    I modified it many times, and don't remember them...

    I modified it many times, and don't remember them all :) After lots of messing around, I found a post about the repositories, and changed it to this:

    deb http://http.kali.org/kali kali-rolling...
  36. Thread: Adding a RTC

    by RChadwick
    Replies
    2
    Views
    487

    I hoped it would be that easy, but I get an error...

    I hoped it would be that easy, but I get an error msg:


    root@kali:/# sudo i2cdetect -y 0
    Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0':...
  37. Thread: Adding a RTC

    by RChadwick
    Replies
    2
    Views
    487

    Adding a RTC

    I've got a DS3231 attached to my RPi 0W. How can I get Kali to recognize it?
  38. You were right. Maybe it was my hub, or low...

    You were right. Maybe it was my hub, or low battery in the wireless keyboard. Hitting enter got me the command prompt. Thanks!
  39. Problems installing on a Raspberry Pi Zero W

    I downloaded kali-linux-2018.4-rpi0w-nexmon.img and flashed it to a 16GB MicroSD, and popped it into my Raspberry Pi Zero W (Actually, I tried two different ones, with the same problem). It starts to...
  40. Replies
    7
    Views
    1,586

    Problem with update on new install Nexus 5

    I reset and rooted my Nexus 5, and then installed Nethunter 3.0. After running Nethunter, I'm unable to add Metapackages. Running apt-get update fails with a bunch of errors:

    W: Failed to fetch...
  41. Finding USB drivers that support injection/monitor

    I'm looking to run Aircrack on my tablet. It has a full size USB port, so I don't have to worry about OTG. However, every program related to Aircrack on Android works with bcmon, or a USB adapter...
  42. Replies
    1
    Views
    1,263

    Questions about requirements

    First, do I need to factory reset before installing Nethunter? Can I still use my N7 as an android tablet?

    Second, how much free space is required to install?
  43. No, just Pen testing. Just curious, but why was...

    No, just Pen testing. Just curious, but why was that feature removed? Most routers I test nowadays can't be cracked without resetting the router.
  44. I really like your script. However, I read...

    I really like your script. However, I read somewhere this will reboot locked routers with MDK3. I can't find an option for that. Is it supported?
  45. Replies
    4
    Views
    1,983

    Thanks for the response. It took too long for my...

    Thanks for the response. It took too long for my moderated post to get through, so I experimented. I think around 12GB was enough to install, but had 0GB left. I settled on 15GB, which seems OK. Hope...
  46. Replies
    4
    Views
    1,983

    I did ...

    I did

    http://docs.kali.org/installation/dual-boot-kali-with-windows

    "Select your Windows partition. Depending on your system, it will usually be the second, larger partition. In our example,...
  47. Replies
    4
    Views
    1,983

    Install fails... Partition too small?

    I'm trying to dual boot Windows 7 and Kali, on a Samsung Q1U UMPC, with a 32GB SSD. I successfully installed Kali, but wanted to dual-boot. I installed Win7, leaving a 9GB partition. Then, I tried...
  48. Replies
    15
    Views
    32,854

    Is there a pre-compiled ISO available? I have an...

    Is there a pre-compiled ISO available? I have an older UMPC I want to use, and buying a new laptop is not the solution I'm looking for. Or would I be better off using Backtrack, which works fine?
Results 1 to 48 of 52
Page 1 of 2 1 2