Search:

Type: Posts; User: brunoaduarte

Search: Search took 0.01 seconds.

  1. I also have a problem with the touchpad on latest...

    I also have a problem with the touchpad on latest Kali, the scroll button stopped working.
  2. My reader is a RaspberryPi, so it's 5V. It's...

    My reader is a RaspberryPi, so it's 5V.

    It's not needed to power the alfa card. Only those 3 lines connected are enough.
  3. No, i did not power the board... I just connect...

    No, i did not power the board... I just connect SDA, SCK and GND, and i can read the chip.

    To write, i manually bridge WP to GND using a tweezer and press the keyboard to execute the write script,...
  4. Pretty much... As setting "iwconfig wlan0 txpower...

    Pretty much... As setting "iwconfig wlan0 txpower 18" in reality sets 23 dBm of power inside the driver, and the card can't go any further (at least with atheros drivers + firmware), it's not even...
  5. Yeah, i imagine that buying one of these 30$...

    Yeah, i imagine that buying one of these 30$ amplifiers would not be worth it. Do you recommend any power amplifier ? Something like 2~3 W is enough.

    Thanks
  6. @mokba, sorry, but i guess that's bulls**t......

    @mokba, sorry, but i guess that's bulls**t... Maybe the Windows/Mac drivers provided by Alfa could theoretically do that (very hard to believe they would do it though).

    But Linux uses open sources...
  7. Hi, i think setting region in EEPROM won't make...

    Hi, i think setting region in EEPROM won't make any difference for the Linux tests, as i've already tampered the regulatory files in my Kali Linux to make country GB allow 33 dBm.

    Anyway, i've set...
  8. Cool device ! I've just bought one for me too......

    Cool device ! I've just bought one for me too...



    Nice tests... I'll wait for my usb power measurer to arrive and i'll do similar tests with the AWUS036NHA

    So... yesterday i did some EEPROM...
  9. 500 mA x 5V = 2500 mW (33.97 dBm) I think a...

    500 mA x 5V = 2500 mW (33.97 dBm)

    I think a regular usb 2.0 port should provide 1W (30 dBm) (200 mA) easily. Shouldn't it ?
  10. Hi, @mrflash: - There's no need to remove...

    Hi,

    @mrflash:

    - There's no need to remove the EEPROM from the card. It's a I2C memory, so you could just solder 2 thin wires (SDA and SCK) if you've got a i2c programmer.
    (I'm using a...
  11. Help uninstalling Backports v4.4-rc2 from Kali v2.0

    I was trying to hack my ath9k firmware in Kali v2.0 (to increase tx power in Atheros AR9271), so i downloaded Backports v4.4-rc2, and changed the ath9k source code.

    Then i compiled backports and...
  12. Hi mokba, have you tried editing the ath9k driver...

    Hi mokba, have you tried editing the ath9k driver source code "max_power" property ?

    ath9k/common-init.c


    #define CHAN2G(_freq, _idx) { \
    .band = IEEE80211_BAND_2GHZ, \
    .center_freq =...
  13. Nice, if you've got a RaspberryPi you could read...

    Nice, if you've got a RaspberryPi you could read it very easily just by connecting wires to I2C SDA and SCK lines (don't need to remove the EEPROM from PCB)...

    So,

    Here's the 1144 (taken from...
  14. mokba, i've found 4 devices on the I2C line, so i...

    mokba, i've found 4 devices on the I2C line, so i dumped them all


    0 1 2 3 4 5 6 7 8 9 a b c d e f
    00: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    10: -- -- -- -- -- --...
  15. Hi, my AWUS036NHA arrived today, but...

    Hi, my AWUS036NHA arrived today, but unfortunately it seems to be the same region of yours (even though i've bought it from USA).



    Jan 4 21:37:00 android kernel: [ 294.112057] usb 2-5: new...
  16. Didn't worked @mete777 live.cfg label...

    Didn't worked @mete777

    live.cfg


    label live-686-pae
    menu label ^Live (686-pae)
    linux /live/vmlinuz
    initrd /live/initrd.img
    append boot=live username=root hostname=kali
  17. Hi mokba, i thought that only the regulatory...

    Hi mokba, i thought that only the regulatory domain setting (cfg80211: DFS Master region), was written to the EEPROM.

    My new AWUS036NHA should arrive next monday (bought from US). I'll make an...
  18. Thank you very much @zimmaro !!! Seems that...

    Thank you very much @zimmaro !!!

    Seems that the "purge" option when uninstalling modules + the manual remove of "/usr/share/metasploit-framework" folder did the job !



    root@kali:~# apt-get...
  19. Kali v2.0 + msfdb + postgresql + armitage problem

    Hi,

    I'm trying to run armitage in Kali v2.0 + USB persistence. But i got a problem with "msfdb init" that i'm unable to fix.

    I've got latest version from all modules
    - armitage150813
    -...
  20. It doesn't work in Kali v2.0 I've updated and...

    It doesn't work in Kali v2.0

    I've updated and upgraded all modules

    Anyone knows how to fix this ?



    root@kali:~# apt-get clean && apt-get update && apt-get upgrade
    ...
  21. send pictures of it to alfa support...

    send pictures of it to alfa support http://www.alfa.com.tw/
  22. Well, is awus036nh genuine from Alfa ? I've...

    Well, is awus036nh genuine from Alfa ?

    I've returned my cloned AWUS036NH because it's a piece of **** !

    Done a couple of tests here, and even though you can set it's txpower up to 2000mW (33...
  23. The maximum output power for the AWUSO36NHR is...

    The maximum output power for the AWUSO36NHR is 2000 mW, do you know what's the maximum for the AWUSO36NHA ?

    BTW, watch out for fake adapters, they're all over the internet.
    I've bought myself a...
  24. Replies
    47
    Views
    373,565

    I believe that the cards have a firmware...

    I believe that the cards have a firmware limitation to max rf power... I have 3 wlan adapters, one goes up to 33 dBm,oher goes at maximum 30 dBm, and the third one only goes up to 20 dBm (same...
  25. Awesome ! I'm going to apply this to varmacscan2.8

    Awesome ! I'm going to apply this to varmacscan2.8
  26. I'm not able to install these patches on Kali...

    I'm not able to install these patches on Kali 2.0. I get error on "compatdrivers_chan_qos_frag" and "fix-channel-negative-1-on-new-backport-by-Devil_D"

    Is it normal ?


    ...
  27. I edited live.cfg and put "menu default" on...

    I edited live.cfg and put "menu default" on persistence option



    label live-persistence
    menu label ^Live USB Persistence (check kali.org/prst)
    menu default
    linux...
  28. yeah, i know about this -C (--ignore-fcs) flag,...

    yeah, i know about this -C (--ignore-fcs) flag, but it seems to me just like hiding the problem.

    About the injection, why do you say it's normal that it stops working ? that doesn't happen with my...
  29. Alfa AWUS036NH RT3070L USB on Kali v2.0 - Injection and wash error. Buggy firmware ?

    I've just got a new Alfa AWUS036NH (fake according to Alfa Network support) USB adapter and i'm having some injection + wash scan problems...

    Device photos:
    1069
    1072
    1070
    1071

    I'm running...
  30. Replies
    21
    Views
    18,492

    http://null-byte.wonderhowto.com/how-to/set-your-w...

    http://null-byte.wonderhowto.com/how-to/set-your-wi-fi-cards-tx-power-higher-than-30-dbm-0149606/

    btw, iwconfig here shows it's 33 dBm, but how can i test if it's really outputting 2W ?
  31. Thanks scorpius, I've used HexWorkshop in...

    Thanks scorpius,

    I've used HexWorkshop in windows to replace the hex sequences on a Kali USB image and it worked, beep is now disabled. Thanks !
  32. Replies
    21
    Views
    18,492

    Same here... "country 00 invalid" with...

    Same here... "country 00 invalid" with "crda-3.18.tar.xz" and "wireless-regdb-2015.10.22.tar.xz"

    I fixed it by using the same version from tutorials, try to download "crda-1.1.3.tar.bz2" and...
  33. Ok thanks mmusket33 ! FYI: About the WPS pin...

    Ok thanks mmusket33 !

    FYI: About the WPS pin being disabled, seems it's just some firmware's protection style.
    Some only lock WPS, others lock and then after some time disable it. Others just...
  34. Sure, bully -b XX:XX:XX:XX:XX:XX -c 3 -v 3...

    Sure,


    bully -b XX:XX:XX:XX:XX:XX -c 3 -v 3 -B -p 20863463 wlan0mon

    BTW, could you consider removing the confirmation (Y/n) dialogs from next version of released scripts ? Or maybe a menu...
  35. Hi mmusket33 ! In vk496/Linset, there's a...

    Hi mmusket33 !

    In vk496/Linset, there's a feature to auto test the captured wpa passphrase (the one user entered on the fake accesspoint page) in realtime, by trying it on a previous captured WPA...
  36. Repeated message, delete please

    Repeated message, delete please
  37. Yeah yeah, i always look at the VARMAC_WPSWPA...

    Yeah yeah, i always look at the VARMAC_WPSWPA folder, no files are created in VARMAC_WHITELST here, cause i've never got the WPA pass from reaver (i guess the bssid is only white listed when wpa is...
  38. Awesome mmusket33, thanks ! I'm testing it... ...

    Awesome mmusket33, thanks ! I'm testing it...

    There are 2 cases, where i got the WPS PIN (no WPA as usual), but later when i try to attack it again (to get WPA pass with bully), it's WPS is...
  39. It worked. Thanks !

    It worked. Thanks !
  40. SSH service has to be restarted after every reboot

    Hi,

    I'm running Kali 2.0 Live USB (with persistence), and everytime i reboot my laptop i have to manually restart ssh service after the boot by running:


    service ssh restart

    otherwise my...
  41. Yeah Laserman75, i know aireplay-ng will not...

    Yeah Laserman75, i know aireplay-ng will not crack the WPA pass. What i meant is that i was going to try aireplay-ng to make the auth/association process for reaver (reaver -A flag), because i was...
  42. Nice mmusket33, Hoping to see the new version...

    Nice mmusket33,

    Hoping to see the new version of your script... also i'll try to use aireplay-ng auth here and see if i can crack the wpa passphrase.

    Btw, could you remove those confirmation...
  43. mmusket33, As now i have the wps pin code, i...

    mmusket33,

    As now i have the wps pin code, i manually loaded reaver (same line that is executed by varmacscan):


    reaver -i wlan0mon -a -f -c 10 -b XX:XX:XX:XX:XX:XX -r 2:15 -L -E -vvv -N -T 1...
  44. Ok mmusket33, it seems to happen more often here,...

    Ok mmusket33, it seems to happen more often here, i've got 6 pins and no WPA.

    I though the problem would be the same related in this link: https://code.google.com/p/reaver-wps/issues/detail?id=203...
  45. Hi mmusket33, I'm running my tests on Kali...

    Hi mmusket33,

    I'm running my tests on Kali v2.0 Live USB with Persistence (BCM4311 wifi chipset).

    Here are the contents from both VARMAC_LOGS and VARMAC_WPSWPA folders:
    ...
  46. Seems to work here too, but with same no wpa key...

    Seems to work here too, but with same no wpa key problem related by squash

    VARMAC_WPSWPA


    WPS Pin: = '12345670'
    WPA Key: =
    AP SSID: =

    Note WPA Key is found between the two(2) tick...
Results 1 to 46 of 46