Page 1 of 8 123 ... LastLast
Results 1 to 10 of 77

Thread: Install Kali ARM on a Raspberry Pi

  1. #1
    Administrator
    Join Date
    Feb 2013
    Posts
    33

    Install Kali ARM on a Raspberry Pi

    To install KALI ARM distribution on a Raspberry Pi, please read the article below:


    To read the full document, check our Install Kali ARM on a Raspberry Pi article.


    If you have any issues with this procedure, please post them in this thread.
    Last edited by bolexxx; 2013-03-13 at 02:25 PM.

  2. #2
    Junior Member
    Join Date
    Mar 2013
    Posts
    2
    Hello!

    I just tried to install the Kali ARM on a Raspberry Pi, exact to the Instruction.....
    The image was copied to the sd-card, but it only generates one partition!?!
    That`s not normal.
    After I insered the sc-card to the r-pi, it won`t boot up.

    IDEA?!?

    Thanks.

    Greats
    Chris

  3. #3
    Junior Member
    Join Date
    Mar 2013
    Posts
    2
    The image that is downloaded is not appropriate for the Raspberry Pi. I found this address in twitter where you can download all images, and you can see that this one corresponding to Raspberry Pi

    http://cdimage.kali.org/

  4. #4
    Junior Member
    Join Date
    Mar 2013
    Posts
    6
    works for me

  5. #5
    Junior Member
    Join Date
    Mar 2013
    Posts
    1
    I have downloaded the nightly raspberry build and flashed it with win32diskutility but it does not boot up

  6. #6
    Junior Member
    Join Date
    Mar 2013
    Posts
    2
    Hey,

    now I used the Imgae from here
    http://cdimage.kali.org/
    and now it works!

    Only Wifi is still not working, but tomorrow is another day! :-)
    (P.S. I`m from germany :-) )

    Remember: Use min 8GB SD-Card

  7. #7
    Junior Member
    Join Date
    Mar 2013
    Posts
    1
    Hello,

    I tried many times to install Kali on my RPi, but it never boot up.
    First time, I used the image from the download page then the image from http://cdimage.kali.org/ but no changes.
    (I tried to install with the instuctions from site and with Win32DiskImager)

    Any idea ? I have a 16GB SD-CARD SANDISK

  8. #8
    Junior Member
    Join Date
    Mar 2013
    Posts
    3
    I have Kali running on my Pi just fine but when I go to start the metasploit service it is unrecognized(#service metasploit start). Msfconsole runs properly but you are unable to do anything because it wont link to the Database. Is anyone else having this problem?

    Database Service works just fine though(#service postgresql start)

  9. #9
    Junior Member
    Join Date
    Mar 2013
    Posts
    3
    I have solved the problem with the Win32DiskImager. It is how you extract it that controls if it will work. I got it working with WinRar. The first time I tried I just renamed it and the image would not work.

  10. #10
    Junior Member
    Join Date
    Mar 2013
    Posts
    1
    I succesfull installed the image to my SD card but I can't use my Wireless Adapter

    Code:
    root@kali:~# lsusb
    Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
    Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
    
    root@kali:~# iwconfig
    wlan0     unassociated  Nickname:"<WIFI@REALTEK>"
              Mode:Auto  Frequency=2.412 GHz  Access Point: Not-Associated
              Sensitivity:0/0
              Retry:off   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:off
              Link Quality:0  Signal level:0  Noise level:0
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:0   Missed beacon:0
    lo        no wireless extensions.
    eth0      no wireless extensions.
    root@kali:~# airmon-ng
    
    Interface       Chipset         Driver
    root@kali:~#
    Anyone ideas?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •