Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 77

Thread: Install Kali ARM on a Raspberry Pi

  1. #21
    Junior Member
    Join Date
    Jun 2013
    Posts
    9
    Does anyone have a sure-fire method of getting the RT8187 (Alfa 036H) USB WiFi chipset working on boot with Raspberry Pi Kali? As others have found I can see the Alfa 036H :-

    root@kali:/etc/init.d# lsusb
    Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
    Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter

    and the drivers appear to be there :-

    root@kali:/etc/init.d# modinfo rtl8187
    filename: /lib/modules/3.6.11-cutdown/kernel/drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko
    license: GPL
    description: RTL8187/RTL8187B USB wireless driver
    author: Larry Finger <Larry.Finger@lwfinger.net>
    author: Hin-Tak Leung <htl10@users.sourceforge.net>
    author: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
    author: Andrea Merello <andreamrl@tiscali.it>
    author: Michael Wu <flamingice@sourmilk.net>
    srcversion: B7A64080945C5E092134248
    alias: usb:v1737p0073d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v1B75p8187d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v18E8p6232d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v13D1pABE6d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v1371p9401d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v114Bp0150d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0DF6p0029d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0DF6p0028d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0DF6p000Dd*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v03F0pCA02d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0846p4260d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0846p6A00d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0846p6100d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0789p010Cd*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0769p11F2d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0BDAp8198d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0BDAp8197d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0BDAp8189d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0BDAp8187d*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v050Dp705Ed*dc*dsc*dp*ic*isc*ip*in*
    alias: usb:v0B05p171Dd*dc*dsc*dp*ic*isc*ip*in*
    depends: mac80211,eeprom_93cx6,led-class,cfg80211
    intree: Y
    vermagic: 3.6.11-cutdown preempt mod_unload modversions ARMv6 p2v8

    It is at all feasible to run the Raspberry Pi Kali headless, including performing the initial config/setup via SSH? My plan is to build a small deployable aircrack-ng appliance with remote access via a 3G router. Having to plug a monitor/keyboard/mouse into the Pi would be a pain.

    Lunokhod

  2. #22
    Junior Member
    Join Date
    Jun 2013
    Posts
    9
    OK... a quick follow up from my last post about the Alfa 036H and Kali on the Raspberry Pi... I'm still having trouble getting it working. I'm sure I am missing something very simple.

    If I start Network Manager "/etc/init.d/network-manager start" I get some action. The LED on the 036H starts flashing and I get a wlan0 interface (woo hoo).

    wlan0 Link encap:Ethernet HWaddr 00:c0:ca:40:ed:08
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)


    But a subsequent "airmon-ng start wlan0" gives me this :-

    Found 3 processes that could cause trouble.
    If airodump-ng, aireplay-ng or airtun-ng stops working after
    a short period of time, you may want to kill (some of) them!
    -e
    PID Name
    1480 dhclient
    1890 wpa_supplicant
    3077 NetworkManager


    Interface Chipset Driver


    root@kali:~#

    No indication of a mon1 or any other monitor mode interface created by airmon-ng. So I'm back to the question from my previous post... how can I get the Alfa 036H working (preferably without Network Manager) on Kali running on the Raspberry Pi... and preferably via a shell and not GUI.

    On a side note, I also notice similar symptoms on my netbook based Kali. I get no wlan0 interface unless Network Manager is running first. But on the netbook, I can use "airmon-ng start wlan0" and I do get a mon0 interface. (eth1 is the built in Intel Wifi).

    Interface Chipset Driver

    wlan0 Realtek RTL8187L rtl8187 - [phy2]
    (monitor mode enabled on mon0)
    eth1 Intel 2200BG/2915ABG ipw2200 - [phy0]

    root@kali:~#

    This is driving me a little crazy!

    Lunokhod

  3. #23
    Junior Member
    Join Date
    Jan 2014
    Posts
    1
    Mmmmm, Is there not lsusb on Kali 1.0.6 ????

    root@kali:/etc# cat debian_version
    Kali Linux 1.0.6
    root@kali:/etc# uname -a
    Linux kali 3.10.26 #1 PREEMPT Sat Jan 11 04:27:34 EST 2014 armv6l GNU/Linux
    root@kali:/etc# lsusb
    -bash: lsusb: command not found
    root@kali:/etc#

  4. #24
    Junior Member
    Join Date
    Aug 2013
    Posts
    20
    Quote Originally Posted by Fatuo View Post
    Mmmmm, Is there not lsusb on Kali 1.0.6 ????

    root@kali:/etc# cat debian_version
    Kali Linux 1.0.6
    root@kali:/etc# uname -a
    Linux kali 3.10.26 #1 PREEMPT Sat Jan 11 04:27:34 EST 2014 armv6l GNU/Linux
    root@kali:/etc# lsusb
    -bash: lsusb: command not found
    root@kali:/etc#
    I have the same result.

    root@kali:~# lsusb
    -bash: lsusb: command not found

    root@kali:~# lspci
    bcilib: Cannot open /proc/bus/pci
    lspci: Cannot find any working access method.

    But lsmod works just fine.

  5. #25
    Junior Member
    Join Date
    Feb 2014
    Posts
    1

    Problems installing 1.0.6 arm image on sd card please help

    Hello-
    I know that some of you were facing the same problem while installing the image on an SD card.
    I have tried to format my 16gb SD class 10 using win32 utility and winflash as well with no success.
    The files I have used have been downloaded from all the sources you have mentioned before. There is a 1.90GB and a 2.0GB files out there that are suppossed to work with the pi.

    Is there anything that I might be missing? My Pi is still not booting and when the win32 utility finishes formatting the SD card the card becomes obsolote on my windows machine, meaning that I cannot see the contents inside (I know that it is suppossed to be on a different format) but I still should be able to see them on my Mac as well but that is not the case.

    Someone mentioned before that this might be due to how the file is being decompressed (I have used winrar and 7-zip) but this does not seem to work.

    I am very excited to start playing with Kali and the Pi but this first step has me very frustrated.
    Thanks for your support guys.

    Windows 8 x64
    Winrar-7zip
    Kali Linux 1.06 ARM
    Raspberry pi class B

  6. #26
    Junior Member
    Join Date
    Feb 2014
    Posts
    1
    I can't boot 1.0.6 image too. I have tried with dd and with Win32 Disk Imager. Tried with both image: from original download page and from cdimage.kali.org. Extracted with unxz and with 7-zip and with winrar. Nothing!! Wireless problem is still the same like in 1.0.4. image.
    Reading this https://forums.kali.org/showthread.p...alled-in-1-0-5
    an this: https://forums.kali.org/showthread.p...berry-pi-image . I believe that this is the worst image ever. I still using 1.0 upgraded version. I wonder if the new version will be better???

  7. #27
    Junior Member
    Join Date
    Feb 2014
    Posts
    3
    In the web GUI goto "wpa_gui" setup tool and connect to an existing WLAN and youre done !
    You can do that manually as well in editing /etc/network/interfaces

    allow-hotplug wlan0
    iface wlan0 inet dhcp
    wpa-ssid YourSSID
    wpa-psk YourPassword

    You can also leave the default
    allow-hotplug wlan0
    iface wlan0 inet dhcp
    wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf

    and simply edit the /etc/wpa_supplicant/wpa_supplicant.conf file with the following

    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
    update_config=1
    eapol_version=1
    ap_scan=1
    network={
    ssid="yourssid"
    scan_ssid=1
    key_mgmt=WPA-PSK
    pairwise=CCMP
    group=CCMP
    psk=your password
    }

    To not copy your key in cleartext you can calculate the passphrase with
    wpa_passphrase yourssid yourpassword

    which should give you something like this:
    psk=01b035e084c87e1a3e348e6fbb4783202b145950789c69 1687ee0a6f71584e8b

  8. #28
    Junior Member
    Join Date
    Feb 2014
    Posts
    3
    For the German buddy "chr155" at the top please check:
    http://http://www.administrator.de/contentid/191718
    It has a full description how to setup WLAN and the aircrack suite.
    Last edited by wwinzig; 2014-03-02 at 03:08 PM.

  9. #29
    Junior Member
    Join Date
    Jul 2013
    Posts
    2
    Hello! I need to get new usb-modeswitch (29/05/2014) for Kali 1.0.6a for Raspberry Pi. In default repository only old version of usb-modeswitch, not included my 3g device "12d1:14b5". How can I got new usb-modeswitch?
    THX!

  10. #30
    Junior Member
    Join Date
    Jun 2014
    Posts
    6
    Well i got another type of problem. For some reason when i start x i cant find the "kali" tab in the start menu! it doesn't exist. i got the KALI background but i got something that reminds of a button menu in the bottom, still no hackingtools visible

    Used "startx" to start kali

    EDIT: apt-get solved the issue
    Last edited by webbsmurfen; 2014-06-21 at 05:28 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •