Results 1 to 5 of 5

Thread: MDK3 problem

  1. #1
    Join Date
    2013-Mar
    Location
    where you can hear the silence
    Posts
    6

    MDK3 problem

    Hi guys, just tried MDK3 and realized that is not working as it should be, i tried to dos my AP but nothing happening, i was able to dos my AP with BT5-3 every time and still able to,

    signal is very good it's -10 to -20 so i know is not the signal problem because am very few feet away from the AP pluse from the same distance am able to dos it with BT5-3

    however i notice when i dos it there's only one client conected to my AP, but on BT5 there's thousands clients conected,

    your help will be appreciated, thank you


    root@Kali:~# mdk3 mon0 a -a 00:818:4D:C6:92

    AP 00:818:4D:C6:92 is responding!
    Connecting Client: 20:F2:5E:B7:00:71 to target AP: 00:818:4D:C6:92
    AP 00:818:4D:C6:92 seems to be INVULNERABLE!
    Device is still responding with 1000 clients connected!

    it says that 1000 clients connected but there is only one!

  2. #2
    Join Date
    2013-Jun
    Posts
    5
    I had a similar problem with the aircrack suite and mdk3. On Ubuntu 10.04 they both worked fine for me, but I lost full functionality on Kali. In my case it seems that the problem was with the wireless drivers -- the change in OS meant a change in wireless drivers and I lost the ability to inject packets. My advice would be to use airmon-ng to check what chipset you are using, and use aireplay-ng to check that you have injection.

    Good Luck!

  3. #3
    Join Date
    2013-Mar
    Location
    where you can hear the silence
    Posts
    6
    sorry bit late to replay on here but i did fix the problem the same day i posted this, nothing wrong with the driver or what ever, what i did is prety simple!

    i had BT5-r3 installed on VM with kali next to eachother, i have deleted mdk3 from kali from /usr/bin/mdk3 and copy paste from BT5-r3 to kali, i noticed that the file size is not the same, the mdk3 file in kali much bigger, anyway when you copy paste to kali all what you have to do is, open mdk3 properties, under Permissins tick the box says Allow executing file as program and you should be good to go,

    MDK3 now working beautifully on kali,

    thanks for your replay 1n50mn14c anyway,

  4. #4
    Join Date
    2013-Nov
    Posts
    4
    Hi guys!
    Need help...
    Use Kali and MDK3 v.6.0-1kali5 ALFA AWUS036H
    Start command - # mdk3 mon0 a -a D8:FE:E3:XX:XX:XX

    And get - AP D8:FE:E3:XX:XX:XX is responding!
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    Device is still responding with 500 clients connected!
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    Device is still responding with 1000 clients connected!
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    Device is still responding with 1500 clients connected!
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    ................

    Connecting Client: 00:00:00:00:00:00 its very strange. Never changes. mac 00:00:00:00:00:00 its still... I never change my mac.
    Why client mac still and dont change?
    When I use BT5 all was well...

  5. #5
    Join Date
    2015-Mar
    Posts
    2
    Quote Originally Posted by mwa View Post
    Hi guys!
    Need help...
    Use Kali and MDK3 v.6.0-1kali5 ALFA AWUS036H
    Start command - # mdk3 mon0 a -a D8:FE:E3:XX:XX:XX

    And get - AP D8:FE:E3:XX:XX:XX is responding!
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    Device is still responding with 500 clients connected!
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    Device is still responding with 1000 clients connected!
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    Device is still responding with 1500 clients connected!
    Connecting Client: 00:00:00:00:00:00 to target AP: D8:FE:E3:XX:XX:XX
    AP D8:FE:E3:XX:XX:XX seems to be INVULNERABLE!
    ................

    Connecting Client: 00:00:00:00:00:00 its very strange. Never changes. mac 00:00:00:00:00:00 its still... I never change my mac.
    Why client mac still and dont change?
    When I use BT5 all was well...
    put at the end of your command the -m option..

Similar Threads

  1. MDK3 on 5Ghz
    By klawil in forum General Archive
    Replies: 3
    Last Post: 2017-05-24, 11:50

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •