ok so i have Kali Linux on a persistant USB.
lsusb gives me the following
lsmod give me the followingCode:root@kali:~# lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 064e:a219 Suyin Corp. 1.3M WebCam (notebook emachines E730, Acer sub-brand) Bus 002 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 002 Device 005: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter root@kali:~#
iwconfigCode:root@kali:~# lsmod Module Size Used by isofs 30542 1 fuse 56797 1 binfmt_misc 12814 1 arc4 12488 4 joydev 17054 0 rt2800usb 17692 0 uvcvideo 57529 0 ath9k 77727 0 coretemp 12735 0 iTCO_wdt 12728 0 snd_hda_codec_hdmi 30992 1 ath9k_common 12649 1 ath9k rt2x00usb 13393 1 rt2800usb ath9k_hw 313625 2 ath9k_common,ath9k acer_wmi 25789 0 mxm_wmi 12468 0 iTCO_vendor_support 12633 1 iTCO_wdt videobuf2_vmalloc 12593 1 uvcvideo kvm_intel 112520 0 videobuf2_memops 12507 1 videobuf2_vmalloc rt2800lib 47391 1 rt2800usb ath 17154 3 ath9k_common,ath9k,ath9k_hw videobuf2_core 26281 1 uvcvideo rt2x00lib 37542 3 rt2x00usb,rt2800lib,rt2800usb mac80211 287461 4 ath9k,rt2x00lib,rt2x00usb,rt2800lib psmouse 59567 0 videodev 69477 2 uvcvideo,videobuf2_core sparse_keymap 12681 1 acer_wmi acpi_cpufreq 13110 1 crc_ccitt 12332 1 rt2800lib media 13721 2 uvcvideo,videodev i915 381970 7 cfg80211 123887 4 ath,ath9k,mac80211,rt2x00lib rfkill 18647 5 cfg80211,acer_wmi kvm 259959 1 kvm_intel snd_hda_codec_realtek 46119 1 evdev 17298 9 serio_raw 12813 0 wmi 13052 2 acer_wmi,mxm_wmi pcspkr 12561 0 snd_hda_intel 26275 3 mperf 12422 1 acpi_cpufreq lpc_ich 16686 0 battery 12987 0 ac 12553 0 intel_ips 17348 0 video 17463 2 i915,acer_wmi snd_hda_codec 69260 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 12940 1 snd_hda_codec drm_kms_helper 22708 1 i915 i2c_i801 16910 0 snd_pcm 57884 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel crc32c_intel 12660 0 drm 160286 3 i915,drm_kms_helper snd_page_alloc 12911 2 snd_pcm,snd_hda_intel mfd_core 12538 1 lpc_ich snd_timer 22249 1 snd_pcm mei 31163 0 i2c_algo_bit 12714 1 i915 button 12825 1 i915 snd 42873 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel processor 27777 1 acpi_cpufreq i2c_core 19250 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev soundcore 12891 1 snd thermal_sys 17926 2 video,processor squashfs 26771 1 loop 18078 2 aufs 122593 166 nls_cp437 12418 1 vfat 17158 1 fat 44857 1 vfat ext4 326976 0 crc16 12328 1 ext4 jbd2 57854 1 ext4 mbcache 12939 1 ext4 nls_utf8 12417 2 ntfs 163613 0 usb_storage 39334 1 sg 21649 0 sd_mod 35701 2 sr_mod 17507 1 cdrom 30505 1 sr_mod crc_t10dif 12333 1 sd_mod broadcom 12889 0 microcode 17845 0 ahci 24929 1 libahci 22455 1 ahci ehci_hcd 39866 0 libata 125948 2 ahci,libahci usbcore 109555 5 uvcvideo,rt2x00usb,usb_storage,rt2800usb,ehci_hcd usb_common 12339 1 usbcore tg3 114342 0 scsi_mod 131063 5 sg,usb_storage,libata,sd_mod,sr_mod libphy 18932 2 tg3,broadcom
ifconfigCode:wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on
airodump-ngCode:root@kali:~# ifconfig eth0 Link encap:Ethernet HWaddr 1c:75:08:25:58:b6 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16
now my internal wireless Atheros card picks up many netowrk, but this external Alfa picks up maybe 2 networks at the most, when i try in Backtrack 5 R3. One of them is next to me and the other is next door.Code:ioctl(SIOCSIWMODE) failed: Device or resource busy ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start wlan1 <#>' Sysfs injection support was not found either.
I have searched, and i am unable to find a fix, can anyone please give me a guide on how to get this working correctly and patched so i can use it for injection.
Many thanks and thanks in advance for anyone who can help me out with this issue
