Page 13 of 14 FirstFirst ... 311121314 LastLast
Results 121 to 130 of 138

Thread: Troubleshooting Wireless Drivers

  1. #121
    Senior Member
    Join Date
    Oct 2016
    Location
    /dev/sda
    Posts
    615
    Quote Originally Posted by xxchipetxx View Post
    i've got the usb-ac 56 from asus with linux drivers, it has a "install.sh" script i've tried to run it like "chmod 777 install.sh" and "./install.sh" the error messages are

    PHP Code:
    make[1]: Entering directory '/lib/modules/4.3.0-kali1-amd64/build'
    make[1]: *** No rule to make target 'modules'.  Stop.
    make[1]: Leaving directory '/lib/modules/4.3.0-kali1-amd64/build'
    Makefile:1041recipe for target 'modules' failed
    make
    : *** [modulesError 2
    ##################################################
    Compile make driver error2
    Please check error Mesg
    ################################################## 
    and i don't know what to do can you help me?
    Can you show the output of uname-a?

  2. #122
    Junior Member
    Join Date
    Feb 2017
    Posts
    1
    Hello everyone and thanks for reading me, (Sorry for my english I'm french)
    I post here, I hope it is ok, it seems to be the place where we can talk about network issues.

    I bought my AWUS036H, I connect it to my Mac, VMWARE Fusion asks to what system I want it to connect the AWUS I select Linux.
    In Linux, no green light on the cart but when I do "airman-ng" my cart is detected 1/2, and when it is detected I can do monitoring "airman-ng start wlan0" and the answer is good. But, even when it's detected :

    - first, I can't selected a wifi, only the icon wifi appears, nothing else.
    - And when I want to do a any test with my wifi, for example with airman-ng or here with Fluxion, the card disconnect every time when it is used. I take a picture to show you my problem.
    - Sometimes the cart is detected, but 2 minutes later, it is not detected anymore.

    I tried to found drivers but they seems to not work in my case. I try to reinstall
    my Virtual Machine but it don't help too.

    Example of the problem :
    problème wlan.jpg

    I don't know why it happened, because I read that the drivers are normally already installed in kali, so I don't understand,
    Thanks for reading me

  3. #123
    Junior Member
    Join Date
    Apr 2017
    Posts
    1
    Hello. Im new beginner Linux, and I can't find a driver for my USB wifi Although I downloaded the driver from the TP-Link homepage but I can't install it on kali linux, my adapter is TL-WN822N version 4.0 and using a chipset TRL8192EU.
    Please help me

  4. #124
    Junior Member
    Join Date
    Apr 2017
    Posts
    1

    TP-LINK TL-WN722N V2 not showing as Atheros (Realtek instead) and not working in VM

    Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux. I installed it in an Ubuntu machine, and also in the Host machine (Windows 10) and it works fine in both instances.

    Below is some output of a few commands:

    iwconfig

    Code:
    root@kali:~# iwconfig
    eth1      no wireless extensions.
    
    lo        no wireless extensions.
    
    eth0      no wireless extensions.


    ifconfig


    Code:
    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
            inet6 fe80::a00:27ff:fe27:6d4  prefixlen 64  scopeid 0x20<link>
            ether 08:00:27:27:06:d4  txqueuelen 1000  (Ethernet)
            RX packets 13246  bytes 12272521 (11.7 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 5316  bytes 404986 (395.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            ether 08:00:27:36:07:8e  txqueuelen 1000  (Ethernet)
            RX packets 26  bytes 3796 (3.7 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 18  bytes 1860 (1.8 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1  (Local Loopback)
            RX packets 868  bytes 67932 (66.3 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 868  bytes 67932 (66.3 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    When I check in the USB devices of the VMWare, it shows as Realtek 802.11n NIC, but when I do lsusb it displays no info or the vendor at all:


    Code:
    root@kali:~# lsusb
    Bus 001 Device 002: ID 2357:010c  
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    I tried:
    • Making sure it's uninstalled in the host machine
    • Installing the compat-drivers
    • Once compat-drivers are installed, I can see wlan0 and wlan1, but neither of those can do anything, they don't detect networks or send/receive any traffic at all.
    • Reinstalling in the host machine the latest drivers
    • Connecting the USB to other slot
    • Verifying that the USB is set up (filtered) as USB 2.0 in the Virtualbox settings
    • Changing the filter to USB 3.0


    The machine I'm using is a Dell XPS15.

    Thank you for any help, it is greatly appreciated.

  5. #125
    Junior Member
    Join Date
    May 2017
    Posts
    1
    Quote Originally Posted by victorgonal View Post
    Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux.
    Thank you for any help, it is greatly appreciated.
    Hello, I have the exact same problem here. The only difference is my machine (not a Dell XPS). But I'm French as well...
    Thanks in advance for any help

  6. #126
    Junior Member
    Join Date
    May 2017
    Posts
    1
    Quote Originally Posted by victorgonal View Post
    Hello, I have a VM (Virtualbox) install of 64 bit Linux kali 4.9.0-kali3-amd64. Recently I bought a TP-LINK TL-WN722N and when I installed it, it showed as a Realtek chipset (it doesn't show as Atheros, which is what I read it should) and I am having some trouble getting it to run properly on Kali Linux. I installed it in an Ubuntu machine, and also in the Host machine (Windows 10) and it works fine in both instances.

    Below is some output of a few commands:

    iwconfig

    Code:
    root@kali:~# iwconfig
    eth1      no wireless extensions.
    
    lo        no wireless extensions.
    
    eth0      no wireless extensions.


    ifconfig


    Code:
    eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 10.0.2.15  netmask 255.255.255.0  broadcast 10.0.2.255
            inet6 fe80::a00:27ff:fe27:6d4  prefixlen 64  scopeid 0x20<link>
            ether 08:00:27:27:06:d4  txqueuelen 1000  (Ethernet)
            RX packets 13246  bytes 12272521 (11.7 MiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 5316  bytes 404986 (395.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            ether 08:00:27:36:07:8e  txqueuelen 1000  (Ethernet)
            RX packets 26  bytes 3796 (3.7 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 18  bytes 1860 (1.8 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1  (Local Loopback)
            RX packets 868  bytes 67932 (66.3 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 868  bytes 67932 (66.3 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    When I check in the USB devices of the VMWare, it shows as Realtek 802.11n NIC, but when I do lsusb it displays no info or the vendor at all:


    Code:
    root@kali:~# lsusb
    Bus 001 Device 002: ID 2357:010c  
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    I tried:
    • Making sure it's uninstalled in the host machine
    • Installing the compat-drivers
    • Once compat-drivers are installed, I can see wlan0 and wlan1, but neither of those can do anything, they don't detect networks or send/receive any traffic at all.
    • Reinstalling in the host machine the latest drivers
    • Connecting the USB to other slot
    • Verifying that the USB is set up (filtered) as USB 2.0 in the Virtualbox settings
    • Changing the filter to USB 3.0


    The machine I'm using is a Dell XPS15.

    Thank you for any help, it is greatly appreciated.
    I found the reason. The TP-LINK TL-WN722N adapter you used must be version 2.0. You can check the version on the tag located on the back of the adapter or on the bottom of the package box. Change it to version 1.X then it will work.

  7. #127

    Question Broadcom 4360 drivers not being loaded

    Hello everyone,
    Spent massive amount of time trying to get my wireless to work on Macbook Pro (Retina). I am running Kali Linux (rolling) on Mac with Dual Boot.
    My wireless card is Broadcom 4360.

    lspci -vv output shortly was:
    Network controller: Broadcom Corporation BCM4360 802.11ac Wireless Network Adapter (rev 03)

    I googled around and the current default drivers on Kali are not loading (they would be wrong anyway). So I tried follow the following guide since this should enable Broadcom 4360 properly: https://wiki.debian.org/wl
    I follow steps 1-3 but I got an error on step 4.
    The thing is I should be running version 4.9 but for some reason when I try to do 'modprobe wl' I get a fatal error - for some reason the command looks for the file in the 4.6 version and cant find it.

    See attached the output from step 1-4 with the error.

    Can anyone help me understand why i can't make it load the right driver - how do i change it to look in the right place?

    Code:
    root@kali:~# apt-get update
    Hit:1 http://kali.koyanet.lv/kali kali-rolling InRelease
    Reading package lists... Done
    root@kali:~# apt-get install linux-image-$(uname -r|sed 's,[^-]*-[^-]*-,,') linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    linux-headers-amd64 is already the newest version (4.9+80+kali1).
    linux-image-amd64 is already the newest version (4.9+80+kali1).
    broadcom-sta-dkms is already the newest version (6.30.223.271-5).
    0 upgraded, 0 newly installed, 0 to remove and 1679 not upgraded.
    root@kali:~# modprobe -r b44 b43 b43legacy ssb brcmsmac bcma
    root@kali:~# modprobe wl
    modprobe: FATAL: Module wl not found in directory /lib/modules/4.6.0-kali1-amd64

  8. #128
    Hello from Mexico excuse me, I hope you can endenteder since I do not know English and I do not write it either, so I use a translation to communicate with you. And installed kali linux on a laptop dell inspiron 5000 series and I could not, I do not know how to install the wifi driver, I have an integrated wifi card (dual band wireless-ac 3165). Will there be drivers for this type of wifi card? And if there is ... how do you install? Since I am new to linux and especially in kali linux, God bless you and thank you very much, I hope your prompt help.

  9. #129
    Senior Member
    Join Date
    Oct 2016
    Location
    /dev/sda
    Posts
    615
    Quote Originally Posted by segoviasider@gmail.com View Post
    Hello from Mexico excuse me, I hope you can endenteder since I do not know English and I do not write it either, so I use a translation to communicate with you. And installed kali linux on a laptop dell inspiron 5000 series and I could not, I do not know how to install the wifi driver, I have an integrated wifi card (dual band wireless-ac 3165). Will there be drivers for this type of wifi card? And if there is ... how do you install? Since I am new to linux and especially in kali linux, God bless you and thank you very much, I hope your prompt help.
    Drivers for your wifi adapter come pre-installed in kali.

  10. #130
    Junior Member
    Join Date
    Jun 2017
    Posts
    1
    Hello

    MediaTek 3570 error

    pls help me

    root@root:~/5370# make
    make -C tools
    make[1]: Entering directory '/root/5370/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory '/root/5370/tools'
    /root/5370/tools/bin2h
    cp -f os/linux/Makefile.6 /root/5370/os/linux/Makefile
    make -C /lib/modules/4.0.0-kali1-amd64/build SUBDIRS=/root/5370/os/linux modules
    make[1]: *** /lib/modules/4.0.0-kali1-amd64/build: No such file or directory. Stop.
    Makefile:388: recipe for target 'LINUX' failed
    make: *** [LINUX] Error 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •