Results 1 to 4 of 4

Thread: Wireless trouble - Ralink RT5370 "No wireless extentions"

  1. #1
    Join Date
    2014-Jan
    Posts
    1

    Wireless trouble - Ralink RT5370 "No wireless extentions"

    Hi! I successfully installed Kali on my Raspberry Pi, and everything works just fine, except for the troublesome Ralink RT5370 WiFi adapter..

    I installed the firmware for it using "apt-get install firmware-ralink". Afterwards connecting it to my router for browsing the WWW works just fine using xterm to edit "/etc/network/interfaces". The problems occurs when e.g. trying to enable packet injection: "airmon-ng start wlan0"; nothing happens. Just an empty list under the "Interface Chipset Driver" headers. Neither wicd or fern detects any wireless adapters, although I know my Ralink is running because I managed to connect to the internet....


    iwconfig shows: wlan0 no wireless extensions

    Is anyone familiar with my problem?

  2. #2
    Join Date
    2014-Feb
    Posts
    1
    Hello, keeping this thread alive.

    anyone else having this issue? I haven't been able to figure it out

  3. #3
    Join Date
    2014-Feb
    Posts
    3
    Make sure you have iw tools installed with „apt-get install iw“
    check your adapter with "iwconfig" Something like the following should be read:

    wlan0 IEEE 802.11bg Mode:Monitor Frequency:2.442 GHz Tx-Power=20 dBm
    Retry long limit:7 RTS thrff Fragment thrff
    Power Managementff

    Very essential is here "Mode:Monitor" if its not in Monitor mode airmon will NOT work !
    "airmon-ng start wlan0" should do it automatically but very often it didnt work. No worries it can be done manually... ;-)
    iwconfig wlan0 = shows if the WLAN adapter "interface mode" is Monitor Mode ist (should NOT be "Managed"!)
    ifconfig wlan0 down = deactivates the WLAN interface to switch mode
    iwconfig wlan0 mode monitor = switch adapter into Monitor mode.
    ifconfig wlan0 up = reactivates the adapter

    A "iwconfig wlan0" should now show the adapter in "Mode:Monitor" !
    An "airodump-ng wlan0" should now show all SSIDs in the neigborhood.
    "airbase-ng -e "Fee internet access here" -c 2 mon0" spoofs a free WLAN accesspoint wich can be seen with the free inSSIDer Tool:
    www.metageek.net/products/inssider/

  4. #4
    Join Date
    2014-Feb
    Posts
    247
    I don't have a 5370 - could you list the actual model of the wifi device you have? Also, what driver does it say you are using for the device - you can get this by running lsmod.

Similar Threads

  1. TL-wn22n virtual box and Kali connection, cant change wireless "settings"
    By berni3mack in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2015-09-11, 12:56
  2. "Wireless Authentication Required" Window Vicious Cycle
    By Phat_Turtle in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2015-01-24, 03:35
  3. Ralink Technology, Corp. RT5370 Wireless Adapter not functioning
    By maggg in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2013-11-21, 12:02

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •