Originally Posted by
randvoo12
guys , any body installed a printer or scanner on kali before? i have my workcenter connected directly to the router , using cups am able to print , but even with sane i cant control the scanner over the network , i tried every **** tutorial on the net and still no use.....help will be appreciated
p.s: ok , now am able to use the scanner over usb but not over the network and this sux coz thats not practical at all
I have a xerox printer and it works for me properly try to see if your printer model is supported
what model you have ?? I have installed in this way
Code:
sudo adduser root scanner
Code:
sudo adduser root saned
Code:
apt-get install inetutils-inetd sane-utils
Code:
gedit /etc/inetd.conf
add this line
sane-port stream tcp nowait saned:saned /usr/sbin/saned saned
save and exit
Code:
sudo gedit /etc/services
see in the text if is present this line
sane-port 6566/tcp sane saned # SANE network scanner daemon
if is not present add here
save and exit
Code:
sudo gedit /etc/default/saned
set to yes to start saned
RUN=yes
save and exit
Code:
sudo gedit /etc/sane.d/saned.conf
in text find and replace
#data_portrange = 10000 - 10100
in
data_portrange = 10000 - 10100
find
## Access list
and add this line (in my case router have ip 192.168.1.1 change ip for your network )
192.168.1.0/24
127.0.0.1
save and exit
Code:
sudo gedit /etc/sane.d/net.conf
in text find and replace
# connect_timeout = 60
in
connect_timeout = 60
save and exit
Code:
sudo gedit /etc/sane.d/xerox_mfp.conf
find in text
#xerox_mfp.conf
and replace whit
xerox_mfp
tcp wc3220 9400
Code:
service inetutils-inetd restart
Code:
sudo service saned restart
if not work try to reboot
and type again
Code:
sudo service saned restart
this and the only solution I can give you right now I hope it can help you if you have problems please do not hesitate to contact me