Page 5 of 8 FirstFirst 12345678 LastLast
Results 201 to 250 of 376

Thread: (Guide) Installing Nvidia + Bumblebee + CUDA for Optimus enabled Laptops

  1. #201
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Hi Lobster,

    Try again and don't install the linux headers (step #5). It did work for me.

    If not then, welcome to the nut house!
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  2. #202
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Installing the headers should not be an issue. There has been a few posts lately about failed installs and 404 errors with the repos. I'm thinking that a few of the mirrors are out of date and this is causing some partial installs or some failed installs.

    The thing about uname -r to install a kernel is that is checks the current running kernel and installs the header based on that.

    if you updated from an older kernal and didn't reboot, the command linux-headers-$(uname -r) will install the headers for the older kernel.

    What do you see if you run any of the following

    apt-get install --dry-run linux-headers-3.18.0-kali1-amd64
    apt-cache search linux-headers
    chown -R us ./base

  3. #203
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    root@kali:~# apt-get install --dry-run linux-headers-3.18.0-kali1-amd64
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    linux-headers-3.18.0-kali1-amd64 is already the newest version.
    linux-headers-3.18.0-kali1-amd64 set to manually installed.
    The following package was automatically installed and is no longer required:
    libafpclient0
    Use 'apt-get autoremove' to remove it.
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    root@kali:~# apt-cache search linux-headers
    linux-headers-3.18.0-kali1-all - All header files for Linux 3.18 (meta-package)
    linux-headers-3.18.0-kali1-all-amd64 - All header files for Linux 3.18 (meta-package)
    linux-headers-3.18.0-kali1-amd64 - Header files for Linux 3.18.0-kali1-amd64
    linux-headers-3.18.0-kali1-common - Common header files for Linux 3.18.0-kali1
    linux-headers-amd64 - Header files for Linux amd64 configuration (meta-package)
    I'm thinking about butting out and jump a version or two untill 2.0 ... Anyways let me know if you want me to checkout anything friend
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  4. #204
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    I ran into that "Unable to load kernel module" from the NVIDIA installer (completely randomly)

    Looks like it's an issue with the installer not unloading the nouveau module.

    Unload it yourself after stopping the gdm3 service with:

    modprobe -r nouveau

    and then run

    ./NVIDIA-Linux-x86_64-346.47.run --dkms -Z (note the big Z)
    Last edited by staticn0de; 2015-03-02 at 13:13.
    chown -R us ./base

  5. #205
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Works

    I should have known. Especially since the NVIDIA install was warning me(sometimes) about nouveau.

    That unsolved mystery solved, what is your take on the new cudaHashcat? I'm very skeptical about the makers(atom) claim that it works better and that everything is "fine", when the benchmark takes twice as long as before.

    If anyone has comparative benchmark(any) between 1.31 and 1.33 please share. Still waiting for anyone saying that 1.33 runs better than 1.31
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  6. #206
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Quest View Post
    Works

    I should have known. Especially since the NVIDIA install was warning me(sometimes) about nouveau.

    That unsolved mystery solved, what is your take on the new cudaHashcat? I'm very skeptical about the makers(atom) claim that it works better and that everything is "fine", when the benchmark takes twice as long as before.

    If anyone has comparative benchmark(any) between 1.31 and 1.33 please share. Still waiting for anyone saying that 1.33 runs better than 1.31
    Here is my comparision

    Code:
    cudahashcat 1.31 example wordlist.
    
    Session.Name...: cudaHashcat
    Status.........: Exhausted
    Input.Base.....: Mask (?a?a?a?a) [4]
    Input.Mod......: File (example.dict)
    Hash.Target....: File (example0.hash)
    Hash.Type......: MD5
    Time.Started...: 0 secs
    Time.Estimated.: 0 secs
    Speed.GPU.#1...: 62193.8 kH/s
    Recovered......: 2190/6494 (33.72%) Digests, 0/1 (0.00%) Salts
    Progress.......: 136302297088/136302297088 (100.00%)
    Skipped........: 0/136302297088 (0.00%)
    Rejected.......: 0/136302297088 (0.00%)
    HWMon.GPU.#1...: -1% Util, 70c Temp, -1% Fan
    
    Started: Tue Mar  3 13:18:58 2015
    Stopped: Tue Mar  3 13:25:21 2015 
    
    
    cudahashcat 1.33
                        
    Session.Name...: cudaHashcat
    Status.........: Exhausted
    Input.Left.....: Mask (?a?a?a?a) [4]
    Input.Right....: File (example.dict)
    Hash.Target....: File (example0.hash)
    Hash.Type......: MD5
    Time.Started...: Tue Mar  3 13:28:33 2015 (12 mins, 15 secs)
    Time.Estimated.: 0 secs
    Speed.GPU.#1...:   185.8 MH/s
    Recovered......: 2190/6494 (33.72%) Digests, 0/1 (0.00%) Salts
    Progress.......: 136302297088/136302297088 (100.00%)
    Skipped........: 0/136302297088 (0.00%)
    Rejected.......: 0/136302297088 (0.00%)
    HWMon.GPU.#1...: -1% Util, 66c Temp, -1% Fan
    
    Started: Tue Mar  3 13:28:33 2015
    Stopped: Tue Mar  3 13:40:52 2015
    Decent difference there. It's clear that 1.31 is much faster than 1.33.

    I'm using CUDA 6.0 and the latest NVIDIA driver (I get better performance on the older CUDA)

    I'll put the 1.31 link back up again.
    chown -R us ./base

  7. #207
    Join Date
    2015-Feb
    Posts
    2
    Thank you staticn0de & Quest, I got it installed and it was the nouveau module causing the problem, I appreciate the help greatly.

    I can now concentrate on obtaining my sanity once again!

  8. #208
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    atom basically says that 1.33 is faster in real life. When pointed out that a benchmark IS real life, he replied that it's just a script. Unfortunately I was never successful cracking a .hccap file with cudaHashcat, so I cannot compare the two versions. If someone does have such comparative sessions please post. I asked over at http://hashcat.net/ for anyone to post comparative benchmarks. No one did.

    Ok you have me doubting about 6.5 now. What is your benchmark to test CUDA? The one we usually do with the "Result = PASS" ?
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  9. #209
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580

    Question GRUB boot menu

    but wait... now that everything seems to be back to normal for installing the headers and NVIDIA, the GRUB boot menu has 4 entries..

    Kali GNU/Linux, with Linux 3.18.0-kali3-amd64
    Kali GNU/Linux, with Linux 3.18.0-kali3-amd64 (recovery mode)
    Kali GNU/Linux, with Linux 3.18.0-kali1-amd64
    Kali GNU/Linux, with Linux 3.18.0-kali1-amd64 (recovery mode)
    can anyone point me to the form to signup for the nut house please?
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  10. #210
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580

    Arrow updated NVIDIA sequence (step #14)

    Record what you need now. If you don't get a login screen when you close gdm3, press [Ctrl]+[Alt]+[F1]
    Code:
    /etc/init.d/gdm3 stop
    Unload the Nouveau module after stopping the gdm3 service with:
    Code:
    modprobe -r nouveau
    Now the NVIDIA install.
    cd ~
    Code:
    ./NVIDIA*.run --dkms -Z
    <--Cap [Z]



    - Accept the EULA
    - Nouveau disabled Yes
    - Files written Ok
    - Register the kernel Yes
    - WARNING 32-bit libraries Ok
    - Install the libvdpau libraries Ok
    …the install will take place
    x Run the nvidia-xconfig No
    - Installation complete Ok

    Code:
    shutdown -r now
    or [Ctrl]+[Alt]+[Del]
    Last edited by Quest; 2015-03-03 at 16:00.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  11. #211
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Quest View Post
    but wait... now that everything seems to be back to normal for installing the headers and NVIDIA, the GRUB boot menu has 4 entries..



    can anyone point me to the form to signup for the nut house please?
    No need for the nut house, run the following to remove the older entries.

    Code:
    apt-get remove --purge linux-headers-3.18.0-kali1-amd64 linux-headers-3.18.0-kali1-common linux-image-3.18.0-kali1-amd64
    chown -R us ./base

  12. #212
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    https://hashcat.net/forum/thread-4161.html

    How to deal with small wordlists

    With oclHashcat v1.32 we added the AMP kernel that compute the password candidates on GPU. That had one advantage and one disadvantage.

    The advantage was that you can now get full cracking speed even for the faster ones of the slow hashes like md5crypt because there's no bottleneck on the candidate generator engine.

    ...

    http://hashcat.net/forum/thread-4162.html

    I've reproduced the case, it's actually slower. Thanks for reporting!

    But no worries, I already found the reason and fixed it. The bitmaps were optimized to run faster on a different hashlist size (much smaller one), but I an see that hashlist size around 500k is what we deal most of the time.
    so i dunno. Confusing. Went from "everything is normal" to "actually slower". Hopefully they will get it sorted out with 1.34
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  13. #213
    Join Date
    2014-Feb
    Posts
    2
    modprobe -r nouveau
    FATAL: nouveau is in use

    how can i ?

  14. #214
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    so v1.1.0a solved all my kernel problems. All is back to normal.

    Now we seem to have a new error message after running modprobe -r nouveau (with gdm3 being shut down)..

    [ 872.758616] nouveau E[ PFIFO] [0000:01:00.0] SCHED_ERROR [ UNK00 ]
    [ 872.758698] nouveau E[ PFIFO] [0000:01:00.0] ...
    ...
    no consequence though. Everything installed



    - Post#4 (off-line install) is good.
    - Waiting for cHc 1.34. No one has reported better performances under 1.33 so that's an X-file
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  15. #215
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    ...in the latest news...

    no one knows how to install or run maskprocessor/linux over @ http://hashcat.net/forum/ and their wiki is useless.

    If anyone knows how to install maskprocessor in kali, let me know.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  16. #216
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Hey quest, what fails for you when you try and install?
    chown -R us ./base

  17. #217
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    hi friend!

    actually it's not to install it(like previously thought), but it's a dependency problem..

    Code:
    :~# cd /usr/share/cudahashcat/ && ./mp64.bin -q 3 -r 4 ?d?d?d?d?d?d?d?d?d?d
    returns
    Code:
    ./mp64.bin: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by ./mp64.bin)
    further inquiry indicates that wheezy uses 2.13. So I will try to modify my sources.list with a jessie repo to get libc6_2.19-15_amd64.deb and libc6-dev_2.19-15_amd64.deb, because to install those package manually got ugly.

    I thought I was out of the woods with 1.1.0a... Never a dull moment i tell ya.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  18. #218
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Try my custom deb:

    https://mega.co.nz/#!NIslBaaL!tHP5tI...Enq8LzoEHIape8

    test it with

    mp64 -q 3 -r 4 ?d?d?d?d?d?d?d?d?d?d
    chown -R us ./base

  19. #219
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    it works, but why is it, if I move the mp64.bin into the cudahashcat dir I get this..

    ~# cd /usr/share/maskprocessor-0.73 && ./mp64.bin -q 3 -r 4 ?d?d?d?d?d?d?d?d?d
    ./mp64.bin: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by ./mp64.bin)
    That's my problem.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  20. #220
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Why are you moving it into a new directory? The directory "cd /usr/share/maskprocessor-0.73" is not where that deb installs it

    I move my mp64.bin file all over the place and it works fine each time. I compiled it with the kali native glibc.

    If you are seeing that error, are you sure that you are using the file from my deb, and not the binary you can download off the web?
    Last edited by staticn0de; 2015-03-16 at 05:43.
    chown -R us ./base

  21. #221
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    what I'm trying to do:

    markov chains is very efficient at creating words, but still spews out things like "arocassse" or with numbers "aroca7999". The odds of 3 repetitions for a human generated password are slim to none. I'm trying to eliminate those useless words using maskprocessor with the arguments '-q' and '-r' as those options are not included with cudahashcat.

    -q 3 = no more than 1 repetition. Ex: aa
    -r 4 = no more than 3 of the same char. Ex: aXaXa

    ok so it's pretty simple, but when trying to pipe maskprocessor in cudahashcat it doesn't work in linux.

    One solution proposed was to place mp64 in the cudahashcat dir. That is why I was trying that.

    That was my original syntax, and since I've tried many..
    Code:
    cd /usr/share/cudahashcat/usr/share/maskprocessor && ./mp64.bin -q 3 -r 4 ?d?d?d?d?d?d?d?d?d?d | cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -t 10 -m 2500 /root/capture.hccap -a 3
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  22. #222
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Quest View Post
    what I'm trying to do:

    markov chains is very efficient at creating words, but still spews out things like "arocassse" or with numbers "aroca7999". The odds of 3 repetitions for a human generated password are slim to none. I'm trying to eliminate those useless words using maskprocessor with the arguments '-q' and '-r' as those options are not included with cudahashcat.

    -q 3 = no more than 1 repetition. Ex: aa
    -r 4 = no more than 3 of the same char. Ex: aXaXa

    ok so it's pretty simple, but when trying to pipe maskprocessor in cudahashcat it doesn't work in linux.

    One solution proposed was to place mp64 in the cudahashcat dir. That is why I was trying that.

    That was my original syntax, and since I've tried many..
    Code:
    cd /usr/share/cudahashcat/usr/share/maskprocessor && ./mp64.bin -q 3 -r 4 ?d?d?d?d?d?d?d?d?d?d | cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -t 10 -m 2500 /root/capture.hccap -a 3
    Works here with the following syntax. Also, I saw your other thread about handshakes and I captured mine as soon as the deauth packet was sent so I don't know why you are having problems.

    Code:
    root@kali ~$ mp64 -q 3 -r 4 ?d?d?d?d?d?d?d?d?d?d  | optirun cudahashcat64 -m 2500 ~/out.hccap    2 ↵  
    cudaHashcat v1.31 starting...
    
    Device #1: GeForce GT 740M, 2047MB, 1032Mhz, 2MCU
    Device #1: WARNING! Kernel exec timeout is not disabled, it might cause you errors of code 702
    
    Hashes: 1 hashes; 1 unique digests, 1 unique salts
    Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
    Rules: 1
    Applicable Optimizers:
    * Zero-Byte
    * Single-Hash
    * Single-Salt
    Watchdog: Temperature abort trigger set to 90c
    Watchdog: Temperature retain trigger set to 80c
    Device #1: Kernel ./kernels/4318/m02500.sm_35.64.ptx
    Device #1: Kernel ./kernels/4318/bzero.64.ptx
    
    Starting attack in stdin mode...
    
                                                 
    Session.Name...: cudaHashcat
    Status.........: Running
    Input.Mode.....: Pipe
    Hash.Target....: TESTROUTER IM:AM:AC:AD:DR <-> SE:CE:RE:T:MA:CC)
    Hash.Type......: WPA/WPA2
    Time.Started...: Tue Mar 17 16:14:19 2015 (9 secs)
    Speed.GPU.#1...:    15393 H/s
    Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
    Progress.......: 151552
    Skipped........: 0
    Rejected.......: 0
    HWMon.GPU.#1...: -1% Util, 71c Temp, -1% Fan
    
                                                 
    Session.Name...: cudaHashcat
    Status.........: Running
    Input.Mode.....: Pipe
    Hash.Target....: TESTROUTER IM:AM:AC:AD:DR <-> SE:CE:RE:T:MA:CC)
    Hash.Type......: WPA/WPA2
    Time.Started...: Tue Mar 17 16:14:19 2015 (19 secs)
    Speed.GPU.#1...:    15435 H/s
    Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
    Progress.......: 303104
    Skipped........: 0
    Rejected.......: 0
    HWMon.GPU.#1...: -1% Util, 75c Temp, -1% Fan
                                                 
    Session.Name...: cudaHashcat
    Status.........: Aborted
    Input.Mode.....: Pipe
    Hash.Target....: TESTROUTER IM:AM:AC:AD:DR <-> SE:CE:RE:T:MA:CC)
    Hash.Type......: WPA/WPA2
    Time.Started...: Tue Mar 17 16:14:19 2015 (24 secs)
    Speed.GPU.#1...:    15420 H/s
    Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
    Progress.......: 352256
    Skipped........: 0
    Rejected.......: 0
    HWMon.GPU.#1...: -1% Util, 68c Temp, -1% Fan
    
    Started: Tue Mar 17 16:14:19 2015
    Stopped: Tue Mar 17 16:14:43 2015
    chown -R us ./base

  23. #223
    Great guide - keep up the good work.
    This is a Kali-Linux support forum - not general IT/infosec help.

    Useful Commands: OS, Networking, Hardware, Wi-Fi
    Troubleshooting: Kali-Linux Installation, Repository, Wi-Fi Cards (Official Docs)
    Hardware: Recommended 802.11 Wireless Cards

    Documentation: http://docs.kali.org/ (Offline PDF version)
    Bugs Reporting & Tool Requests: https://bugs.kali.org/
    Kali Tool List, Versions & Man Pages: https://tools.kali.org/

  24. #224
    Join Date
    2014-Oct
    Posts
    10
    I have a new system that I plan to run the latest Kali 1.1.0, which has installed the GeForce GTX 970. This guide looks like a great reference for getting started, but considering this isn't a laptop with Optimus enabled I'm not sure this will work for me. I tried following blackmoreops instructions http://www.blackmoreops.com/2015/02/.../#comment-2758 , but keep getting a solid black screen w/o the cursor after my reboot (see comments in the link for reference to my comments there).

    Has anyone been successful on a non-optimus with these instructions or have a different resource for the proper instructions? My Google-foo did not produce anything worth-while.
    Last edited by upinarms247365; 2015-03-18 at 17:22. Reason: clarification

  25. #225
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Quote Originally Posted by g0tmi1k View Post
    Great guide - keep up the good work.


    Quote Originally Posted by staticn0de View Post
    Works here with the following syntax.
    yes and thanks. Basically I was trying to make it do something that it was not supposed to do, which is to keep the '-t' argument and limit char recurrence with 'r' and 'q'. That failed. The rest of my problems were just me having another linux esoteric experience.

    Quote Originally Posted by staticn0de View Post
    Also, I saw your other thread about handshakes..
    that's another can of worms. Just read the last post from mmusket33. He's having a linux paranormal experience of his own

    meh, it's interesting, and the nurses here in the nuthouse are nice..
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  26. #226
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by upinarms247365 View Post
    I have a new system that I plan to run the latest Kali 1.1.0, which has installed the GeForce GTX 970. This guide looks like a great reference for getting started, but considering this isn't a laptop with Optimus enabled I'm not sure this will work for me. I tried following blackmoreops instructions http://www.blackmoreops.com/2015/02/.../#comment-2758 , but keep getting a solid black screen w/o the cursor after my reboot (see comments in the link for reference to my comments there).

    Has anyone been successful on a non-optimus with these instructions or have a different resource for the proper instructions? My Google-foo did not produce anything worth-while.
    Hi there,

    I don't have any nvidia cards in my desktop installs so I can't write a guide for you.

    It should be much the same. As in, update fully, Install Kali Linux headers, chmod the nvidia installer, install the driver and then actually run nvidia-xconfig.

    Include the - - dkms and - Z flag on the installer.

    Edit: I had a look at BMO guide, without checking it is possible that the drivers from the repo are too old for your modern card.

    Hit control + all + f2 for another console and check dmesg when it tries to load your nvidia module.

    Otherwise, grab the nvidia installer from the nvidia website like the guide here uses.
    Last edited by staticn0de; 2015-03-19 at 09:32.
    chown -R us ./base

  27. #227
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  28. #228
    Join Date
    2015-Mar
    Posts
    4

    probe of 0000:01:00.0 failed with error -1

    Hello, I'm having some issues that I'm not entirely sure are actual issues. I've followed the install procedure to the letter, and glxspheres64 runs without issue. However When I reach the final step I reach an impasse. I've created a pastebin account, and did the troubleshooting steps (find it here: http://pastebin.com/cwpA6XNz )

    Hardware:
    Lenovo ideapad y580
    Intel HD4000 integrated
    Nvidia gtx 660M
    Intel I7 quad core 64 bit

    I'm assuming I could continue with the optional installs, however I'm loathe to continue without having dealt with the errors. Any assistance would be appreciated greatly.

    Thank you
    Last edited by ZeroTrace; 2015-03-25 at 05:38.

  29. #229
    Join Date
    2015-Mar
    Posts
    4
    *Couldn't delete*
    Last edited by ZeroTrace; 2015-03-25 at 05:37. Reason: trying to delete multiple posts
    '(◣_◢)' <- This is Bob. Bob is angry because for years he's been asking people to help him take over the world. He's only managed a small fraction of his goal so far, but with your help he can finally realize his dreams! Simply copy and paste him into your signature and enjoy the feeling of knowing you've helped someone reach their full potential.

  30. #230
    Join Date
    2015-Mar
    Posts
    4

    probe of 0000:01:00.0 failed with error -1

    *Couldn't delete*
    Last edited by ZeroTrace; 2015-03-25 at 05:36. Reason: trying to delete multiple posts
    '(◣_◢)' <- This is Bob. Bob is angry because for years he's been asking people to help him take over the world. He's only managed a small fraction of his goal so far, but with your help he can finally realize his dreams! Simply copy and paste him into your signature and enjoy the feeling of knowing you've helped someone reach their full potential.

  31. #231
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by g0tmi1k View Post
    Great guide - keep up the good work.
    Thanks g0tmi1k, I do appreciate the comment.
    chown -R us ./base

  32. #232
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Quest View Post
    Thanks for linking Quest, I'm uploading a new deb now.

    Edit:

    Uploaded:

    https://mega.co.nz/#!0Z9DHBob!0QA3cl...iBwBepiYgWZbew

    MD5
    e611e16ab1f3c42c5e98d3ef615a0cd4
    Last edited by staticn0de; 2015-03-22 at 00:32.
    chown -R us ./base

  33. #233
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    well thank you...

    Are you sitting down right now? http://hashcat.net/oclhashcat/

    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  34. #234
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Quest View Post
    well thank you...

    Are you sitting down right now? http://hashcat.net/oclhashcat/

    And.... done! again.

    On the plus side, I changed the compression type and reduced the file size by 20% which is awesome.

    https://mega.co.nz/#!dN8ESI7D!-jxoTZ...SOnkrNvxpDuNNg

    md5sum

    ccdc7ebf4c4a947d14fa663a982e3c10
    Last edited by staticn0de; 2015-03-22 at 06:55.
    chown -R us ./base

  35. #235
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    xD

    AH YES 100mb smaller! Downloading now. Thank you.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  36. #236
    Join Date
    2015-Mar
    Posts
    3
    Hey, I have a problem with installing CUDA. I'm trying this with package for ubuntu 14.04 and 12.04 but for both I got the same warning massage:
    Code:
    ***WARNING: Incomplete installation! This installation did not install the CUDA Driver. A driver of version at least 346.00 is required for CUDA 7.0 functionality to work.
    To install the driver using this installer, run the following command, replacing <CudaInstaller> with the name of this run file:
        sudo <CudaInstaller>.run -silent -driver
    You wrote to grab x64 package, but in table i see only Linux x86, maby thats the point.
    There is my test
    Code:
    Polygons in scene: 62464 (61 spheres * 1024 polys/spheres)
    Visual ID of window: 0x21
    Context is Direct
    OpenGL Renderer: GeForce GT 740M/PCIe/SSE2
    253.956557 frames/sec - 213.506356 Mpixels/sec
    253.252170 frames/sec - 212.914165 Mpixels/sec
    254.893954 frames/sec - 214.294445 Mpixels/sec
    254.001783 frames/sec - 213.544379 Mpixels/sec
    254.973161 frames/sec - 214.361036 Mpixels/sec
    254.204086 frames/sec - 213.714460 Mpixels/sec
    254.366610 frames/sec - 213.851096 Mpixels/sec
    254.329671 frames/sec - 213.820041 Mpixels/sec
    253.751591 frames/sec - 213.334037 Mpixels/sec
    254.276085 frames/sec - 213.774990 Mpixels/sec
    There is my modinfo
    Code:
    filename:       /lib/modules/3.18.0-kali3-amd64/kernel/drivers/video/nvidia.ko
    alias:          char-major-195-*
    version:        346.47
    supported:      external
    license:        NVIDIA
    alias:          pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias:          pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias:          pci:v000010DEd*sv*sd*bc03sc02i00*
    alias:          pci:v000010DEd*sv*sd*bc03sc00i00*
    depends:        drm,i2c-core
    vermagic:       3.18.0-kali3-amd64 SMP mod_unload modversions 
    parm:           NVreg_Mobile:int
    parm:           NVreg_ResmanDebugLevel:int
    parm:           NVreg_RmLogonRC:int
    parm:           NVreg_ModifyDeviceFiles:int
    parm:           NVreg_DeviceFileUID:int
    parm:           NVreg_DeviceFileGID:int
    parm:           NVreg_DeviceFileMode:int
    parm:           NVreg_RemapLimit:int
    parm:           NVreg_UpdateMemoryTypes:int
    parm:           NVreg_InitializeSystemMemoryAllocations:int
    parm:           NVreg_UsePageAttributeTable:int
    parm:           NVreg_MapRegistersEarly:int
    parm:           NVreg_RegisterForACPIEvents:int
    parm:           NVreg_CheckPCIConfigSpace:int
    parm:           NVreg_EnablePCIeGen3:int
    parm:           NVreg_EnableMSI:int
    parm:           NVreg_MemoryPoolSize:int
    parm:           NVreg_RegistryDwords:charp
    parm:           NVreg_RmMsg:charp
    parm:           NVreg_AssignGpus:charp
    I checked gcc version:
    Code:
     gcc (Debian 4.7.2-5) 4.7.2
    So i should be abble to run this 12.04 package.

    I'm w8ing for your opinions about this problem and hope some solutions.

  37. #237
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by TheSeed View Post
    Hey, I have a problem with installing CUDA. I'm trying this with package for ubuntu 14.04 and 12.04 but for both I got the same warning massage:

    ***WARNING: Incomplete installation! This installation did not install the CUDA Driver. A driver of version at least 346.00 is required for CUDA 7.0 functionality to work.
    To install the driver using this installer, run the following command, replacing <CudaInstaller> with the name of this run file:
    sudo <CudaInstaller>.run -silent -driver
    Hi there and welcome to the forum.

    I'm taking a wild guess that you are trying to install the latest CUDA (version 7). Did you happen to use this link?

    http://developer.download.nvidia.com...0.28_linux.run

    CUDA can't find the version of the driver you currently have installed.

    Did you follow the message provided by the installer?

    You don't want to use the --driver flag as it will already be installed if you followed the guide.

    I haven't downloaded the CUDA 7.0 installer yet (it's going now). Try the --help flag on your cuda*.run installer and look for a flag that will disable the driver check.

    If you can't find one, --override should do it.

    Edit: If you see that message at the end of the install (as in CUDA has installed samples and all that goodness) just ignore the message. You didn't really post what you were doing at the time so I'm not sure how to help.
    Last edited by staticn0de; 2015-03-23 at 10:36.
    chown -R us ./base

  38. #238
    Join Date
    2015-Mar
    Posts
    3
    Thanks, staticn0de, for respond. Sorry for uncomplet description of problem, I'm going to suplement this now.

    Quote Originally Posted by staticn0de View Post
    I'm taking a wild guess that you are trying to install the latest CUDA (version 7). Did you happen to use this link?

    http://developer.download.nvidia.com...0.28_linux.run

    CUDA can't find the version of the driver you currently have installed.

    Did you follow the message provided by the installer?

    You don't want to use the --driver flag as it will already be installed if you followed the guide.

    I haven't downloaded the CUDA 7.0 installer yet (it's going now). Try the --help flag on your cuda*.run installer and look for a flag that will disable the driver check.

    If you can't find one, --override should do it.
    Yes, I was running exactly step by step through your guide till moment of CUDA installation. And I'm trying to do so with latest (cuda-7.0). Now with installer from your link. I understand that i don't need to use --driver. I was looking for flag to disable the driver check, but i didn't find any. Also tried --override, but this didn't help me.

    Quote Originally Posted by staticn0de View Post
    Edit: If you see that message at the end of the install (as in CUDA has installed samples and all that goodness) just ignore the message. You didn't really post what you were doing at the time so I'm not sure how to help.
    Yes, this message appears at the end of installation. I'm new in useing CUDA technology, so for me message: "This installation did not install the CUDA Driver." is critical, and i received "CUDA Driver" as critical part of installation, meaning, for me, that I can't use this technology. So I started to find the way out.
    But if you suggests me to ignore this message, as it appears at the end of installation informations, I'll set up dynamic linker for CUDA and try to build some samples to check it out.

    I'll notify the results here soon.

  39. #239
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    No worries TheSeed.

    You don't need CUDA to ins the driver as we already installed it. All we need from CUDA is the toolkit and the samples.
    chown -R us ./base

  40. #240
    Join Date
    2015-Mar
    Posts
    4

    Unhappy Sorry

    Sorry guys, didn't realize there was moderator approval for posts and didn't mean to post 3 times. lesson learned lol
    Last edited by ZeroTrace; 2015-03-25 at 05:35.
    '(◣_◢)' <- This is Bob. Bob is angry because for years he's been asking people to help him take over the world. He's only managed a small fraction of his goal so far, but with your help he can finally realize his dreams! Simply copy and paste him into your signature and enjoy the feeling of knowing you've helped someone reach their full potential.

  41. #241
    Join Date
    2015-Mar
    Posts
    3

    Exclamation

    I'm a very new to linux and am trying to learn i have some of the basics down and an ready to go in to more "harder" territories. I have been trying to get this to work for about 4 days and have reinstalled kali about 7 times because i just couldn't get past it.
    I followed this guide and actually got GDM3 to work, (unkike other times i have tried), after installing i installed pyrit, and tried to use it, At first i used the pyrit benchmark but i saw my speeds were slower than my aircrack speeds, this puzzled me because i saw people getting hudge speeds with far less advanced GPU than mine. (I am using a GTX 860m, with 640 Cuda cores)
    http://pastebin.com/DScfwXAJ
    Any suggestions? I'm coming to my wits end.

  42. #242
    Join Date
    2013-Jul
    Posts
    33
    staticn0de, not sure if I can thank you enough for all the effort you put into this.

    Out of curiosity, is there a way to perform these installations without breaking the Intel driver as bahha pointed out?
    (And maybe update his method of how to fix it?)

    Thanks!

  43. #243
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Ramrsoccer View Post
    I'm a very new to linux and am trying to learn i have some of the basics down and an ready to go in to more "harder" territories. I have been trying to get this to work for about 4 days and have reinstalled kali about 7 times because i just couldn't get past it.
    I followed this guide and actually got GDM3 to work, (unkike other times i have tried), after installing i installed pyrit, and tried to use it, At first i used the pyrit benchmark but i saw my speeds were slower than my aircrack speeds, this puzzled me because i saw people getting hudge speeds with far less advanced GPU than mine. (I am using a GTX 860m, with 640 Cuda cores)
    http://pastebin.com/DScfwXAJ
    Any suggestions? I'm coming to my wits end.
    Hi there,

    If the driver installed correctly and you don't get errors I would need to see your aircrack and pyrit speeds. Have you tried asking on the aircrack or pyrit forums?
    chown -R us ./base

  44. #244
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Rarity View Post
    staticn0de, not sure if I can thank you enough for all the effort you put into this.

    Out of curiosity, is there a way to perform these installations without breaking the Intel driver as bahha pointed out?
    (And maybe update his method of how to fix it?)

    Thanks!
    I've never had the Intel driver break. Have you tried this install with Kali 1.1.0?

    Have you had the driver break on you? if it does, please post output from dmesg
    chown -R us ./base

  45. #245
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by ZeroTrace View Post
    Hello, I'm having some issues that I'm not entirely sure are actual issues. I've followed the install procedure to the letter, and glxspheres64 runs without issue. However When I reach the final step I reach an impasse. I've created a pastebin account, and did the troubleshooting steps (find it here: http://pastebin.com/cwpA6XNz )

    Hardware:
    Lenovo ideapad y580
    Intel HD4000 integrated
    Nvidia gtx 660M
    Intel I7 quad core 64 bit

    I'm assuming I could continue with the optional installs, however I'm loathe to continue without having dealt with the errors. Any assistance would be appreciated greatly.

    Thank you
    Try editing your /etc/default/grub file to include this line (it will already be there but update it so it matches)

    GRUB_CMDLINE_LINUX_DEFAULT="quiet rcutree.rcu_idle_gp_delay=1"

    and then run "update-grub" and restart
    Last edited by staticn0de; 2015-03-29 at 03:29.
    chown -R us ./base

  46. #246
    Join Date
    2013-Jul
    Posts
    33
    Quote Originally Posted by staticn0de View Post
    I've never had the Intel driver break. Have you tried this install with Kali 1.1.0?

    Have you had the driver break on you? if it does, please post output from dmesg
    Yes, I just performed the install on 1.1.0a before posting this. Optirun works as it should but when I run glxgears I get this error:

    Code:
    Xlib:  extension "GLX" missing on display ":0.0".
    Error: couldn't get an RGB, Double-buffered visual
    dmesg output:
    Code:
    [ 9760.524958] nvidia 0000:01:00.0: irq 38 for MSI/MSI-X
    [ 9760.526928] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.526970] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.526993] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.527013] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.527033] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.527053] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.527085] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.527105] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.527451] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    [ 9760.711896] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
    Last edited by Rarity; 2015-03-29 at 06:49.

  47. #247
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    @Rarity

    What are the contents of your /etc/bumblebee/xorg.conf.nvidia file?

    Do you have any other monitors connected to your laptop?

    Toggle bumblebee with the following and post dmesg

    # tee /proc/acpi/bbswitch <<<OFF
    # tee /proc/acpi/bbswitch <<<ON

    Did you use option glxspheres?

    What version of CUDA are you running?
    chown -R us ./base

  48. #248
    Join Date
    2015-Mar
    Posts
    3
    My aircrack was approximately 3,000 K/s, and then the pyrit was appoxamatly 1,000 PMk/s

  49. #249
    Join Date
    2015-Apr
    Posts
    2

    ERROR: could not insert 'nvidia': No such device

    Hi staticn0de, I have ran into a similar problem but your solution did not seem to resolve it.

    As I got the error "Unable to load kernel module", I decided to load the module myself which resulted in this:

    modprobe -vv nvidia

    insmod /lib/modules/3.18.0-kali3-amd64/kernel/drivers/video/nvidia.ko
    libkmod: INFO ../libkmod/libkmod-module.c:829 kmod_module_insert_module: Failed to insert module '/lib/modules/3.18.0-kali3-amd64/kernel/drivers/video/nvidia.ko': No such device
    ERROR: could not insert 'nvidia': No such device
    libkmod: INFO ../libkmod/libkmod.c:319 kmod_unref: context 0x7f7bcd4a22c0 released

    Do you have any idea what is wrong? I have succeeded installing nvidia before so I think this is not a problem with having the wrong installer.

  50. #250
    Join Date
    2015-Apr
    Posts
    2
    Ignore this duplicate
    Last edited by HackerChai; 2015-04-04 at 08:36. Reason: Duplicate

Similar Threads

  1. Replies: 6
    Last Post: 2017-01-04, 19:39
  2. NVIDIA and CUDA with OPTIMUS
    By jolubedju in forum TroubleShooting Archive
    Replies: 1
    Last Post: 2014-06-03, 10:52
  3. Kali Linux 1.05 nvidia optimus cuda and pyrit
    By gfbaggio in forum TroubleShooting Archive
    Replies: 3
    Last Post: 2014-04-28, 20:15

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •