Page 2 of 6 FirstFirst 123456 LastLast
Results 51 to 100 of 256

Thread: Howto frankenScript

  1. #51
    Join Date
    2013-Oct
    Posts
    321

  2. #52
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    oki I'm back. I will do my best to experiment with oclHashcat and Crunch this week...
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  3. #53
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    What I was looking for is actually called "Markov Chains". http://blog.spiderlabs.com/2012/07/h...ov-chains.html

    i'm following a very interesting lead http://hashcat.net/forum/thread-1291.html for injecting 'intelligence' into oclhashcat.

    Atom, has created a .bin called "statsprocessor-0.083" based upon "Markov Chains". http://hashcat.net/wiki/doku.php?id=statsprocessor


    Edit: Actually "Markov Chains" is already included in ocl/cudaHashcat

    * Markov:

    --markov-hcstat=FILE Specify hcstat file to use, default is hashcat.hcstat
    --markov-disable Disables markov-chains, emulates classic brute-force
    --markov-classic Enables classic markov-chains, no per-position enhancement
    -t, --markov-threshold=NUM Threshold when to stop accepting new markov-chains
    http://hashcat.net/wiki/doku.php?id=oclhashcat

    Now just need to figure it out. If anyone has some experience using the above arguments, please share.
    Last edited by Quest; 2014-09-11 at 16:22.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  4. #54
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    can't stop progress

    philsmd, over at Hashcat.net was good enough to help me out with my quest http://hashcat.net/forum/thread-3668.html Thank you Phil

    Can you work with that information Slim? Let me know. I will do some experimenting on my end also..
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  5. #55
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    can't stop progress

    philsmd, over at Hashcat.net was good enough to help me out with my quest http://hashcat.net/forum/thread-3668.html Thank you Phil

    Can you work with that information Slim? Let me know. I will do some experimenting on my end also..
    Yeah I think so, it shouldn't be to difficult to build it into FrankenScript.
    I've scrapped the other versions of FrankenScript due to it having to many issue's, so I'm rewritting everything again.

  6. #56
    I have to say ive been following the growth of this script and find it very interesting. Its not the normal approach to a how too, in fact i'd personally say its far more informative. The collaberation between you guys to create and over come problems, should be encouraged and admired. Keep up the good work.

  7. #57
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Hey skycrazy! Glad you enjoy the show =]

    I'm just a user with a big mouth. Slim does it all, it's his creation. I would love however to see staticn0de work on this project..



    @Slim, any ideas to invoke ocl/cudaHashcat without the full path? Now I'm using this syntax..

    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -m 2500 /root/capture.hccap -a 3 ?u?l?l?l?l?l?d?d
    That will be a small problem, as there will be 4 sets of command lines. Two for ocl(i386 and x64) and two for CUDA(i386 and x64).

    Also, Markov Chains doesn't seem to kick in. May have to use a mask...
    Last edited by Quest; 2014-09-13 at 13:46.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  8. #58
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    Hey skycrazy! Glad you enjoy the show =]

    I'm just a user with a big mouth. Slim does it all, it's his creation. I would love however to see staticn0de work on this project..



    @Slim, any ideas to invoke ocl/cudaHashcat without the full path? Now I'm using this syntax..

    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -m 2500 /root/capture.hccap -a 3 ?u?l?l?l?l?l?d?d
    That will be a small problem, as there will be 4 sets of command lines. Two for ocl(i386 and x64) and two for CUDA(i386 and x64).

    Also, Markov Chains doesn't seem to kick in. May have to use a mask...
    Sorry mate but I still haven't had chance to look into hashcat, I've been busy decorating and and rewritting FrankenScript in my spare time.
    If you can look into hashcat I can get all the info from you once I've finished FrankenScript.

  9. #59
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    yes don't worry. Making progress http://hashcat.net/forum/thread-3668....html#pid20987 went from 45days -to- 4hrs for a 8 character set.

    Can't see options for Crunch for injecting intelligence into it. So it will stay brutforce(and dumb) unless someone has an idea.

    For decorating, lighting is very important and often neglected
    Last edited by Quest; 2014-09-14 at 00:10.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  10. #60
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Quest View Post
    Hey skycrazy! Glad you enjoy the show =]

    I'm just a user with a big mouth. Slim does it all, it's his creation. I would love however to see staticn0de work on this project..



    @Slim, any ideas to invoke ocl/cudaHashcat without the full path? Now I'm using this syntax..

    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -m 2500 /root/capture.hccap -a 3 ?u?l?l?l?l?l?d?d
    That will be a small problem, as there will be 4 sets of command lines. Two for ocl(i386 and x64) and two for CUDA(i386 and x64).

    Also, Markov Chains doesn't seem to kick in. May have to use a mask...
    Hey Quest,

    I've made a short shell script that will check if hashcat is installed and then offer to set up links so that it can be called without full path (can be called with cudahashcat32 and cudahashcat64)

    I was toying around within Frankenscript to insert it as a menu check when hashcat was selected for use.

    I don't see it being hard to check the arch type running the script so it can select if you want cudahashcat32/64 and install only the correct one so it is called with the "cudahashcat" command. Could be the same for oclhashcat, nothing a grep of pci devices wont fix (as it looks for nvidia or ATI)

    either way, the script I just made in about 5 minutes (don't judge my terrible coding skills) which works (just)

    Code:
    #!/bin/bash
    #staticn0des hashcat insert
    #check if installed
    if [ -f /usr/share/cudahashcat/cudaHashcat32.bin ] && [ -f /usr/share/cudahashat/cudaHashcat64.bin ]; then
    echo "cudaHashcat32.bin and cudaHashcat64.bin found"
    else
    echo "cudaHashcat32.bin and cudaHashcat64.bin not found in /usr/share/cudahashcat/."
    echo "Download them from hashcat.net and extract to /usr/share/cudahashcat/"
    echo ""
    read -p "Press any key..."
    
    fi
    
    #check if bin links are installed 
    if [ -f /usr/bin/cudahashcat32 ] && [ -f /usr/bin/cudahashcat64 ]; then
    echo "cudahashcat bin links found. Call directly with cudahashcat32 and cudahashcat64 from terminal"
    else
    echo "cudahashcat bin links not found. cudaHashcat cannot be called without full path"
    echo "Install bin links now?"
    
    read -p $GREEN"[y/n]:$STAND " bin_link_option
    
    #Install bin links
    if [[ $bin_link_option == "y" ]]; then
    cat > /usr/bin/cudahashcat32 <<EOF
    #!/bin/bash
    cd /usr/share/cudahashcat/ && ./cudaHashcat32.bin "$@"
    EOF
    
    cat > /usr/bin/cudahashcat64 <<EOF
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin "$@"
    EOF
    
    chmod +x /usr/bin/cudahashcat64
    chmod +x /usr/bin/cudahashcat32
    
    fi
    fi

  11. #61
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    you rock my friend! That will actually solve the problem of implementing cuda/ocl into FS. Let's see what Slim has to say..


    I'm very happy with Markov Chains also...

    Code:
    Mampho80
    Mannti91
    Maasos33
    Markse91
    Maetro80
    Maltro80
    Masoti91
    Maiamo80
    Maosos33
    Matryo80
    Mambul91
    Manoti91
    Maadro80
    Mardro80
    Maedro80
    Malues33
    Mascia80
    Mairyo80
    Maooti91
    Matsos33
    Mamsos33
    Mankse91
    Maaiti91
    
    
    Sarint98
    Sasers01
    Salant98
    Satint98
    Samint98
    Saastr98
    Saelet98
    Saiant98
    Saomam34
    Sanint98
    Saront98
    Sasham34
    Salont98
    Satont98
    Samont98
    Saatet98
    Saeant98
    Saitet98
    Saouss01
    Sandet98
    Sartet98
    Sasint98
    
    
    Elmpil29
    Elamol29
    Eletol29
    Elices29
    Elosho29
    Elntol29
    Elrsho29
    Elssho29
    Ellula29
    Eltrol29
    Elmmol29
    Eladol29
    Eledol29
    Eliela29
    Eloomi29
    Elnomi29
    Elrula29
    Elsomi29
    Ellyla29
    Elttol29
    Elmula29
    Elaces29
    Eleela29
    Eliomi29
    Elotol29
    Elnsho29
    Elrdol29
    Elsula29
    Ellsho29
    
    Ansina33
    Anlles33
    Anthal33
    Anmpal33
    Anamal33
    Anetes33
    Anicho33
    Anosti87
    Anntes33
    Anrsti87
    Anssti87
    Anluse33
    Antres33
    Anmmal33
    Anades33
    Anedes33
    Anieri87
    Anoona33
    Annona33
    Anruse33
    Ansona33
    Anlyal33
    Anttes33
    Anmuse33
    funky words, but words non-the-less.


    Stay tuned kids, this is interesting
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  12. #62
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    you rock my friend! That will actually solve the problem of implementing cuda/ocl into FS. Let's see what Slim has to say..


    I'm very happy with Markov Chains also...

    Code:
    Mampho80
    Mannti91
    Maasos33
    Markse91
    Maetro80
    Maltro80
    Masoti91
    Maiamo80
    Maosos33
    Matryo80
    Mambul91
    Manoti91
    Maadro80
    Mardro80
    Maedro80
    Malues33
    Mascia80
    Mairyo80
    Maooti91
    Matsos33
    Mamsos33
    Mankse91
    Maaiti91
    
    
    Sarint98
    Sasers01
    Salant98
    Satint98
    Samint98
    Saastr98
    Saelet98
    Saiant98
    Saomam34
    Sanint98
    Saront98
    Sasham34
    Salont98
    Satont98
    Samont98
    Saatet98
    Saeant98
    Saitet98
    Saouss01
    Sandet98
    Sartet98
    Sasint98
    
    
    Elmpil29
    Elamol29
    Eletol29
    Elices29
    Elosho29
    Elntol29
    Elrsho29
    Elssho29
    Ellula29
    Eltrol29
    Elmmol29
    Eladol29
    Eledol29
    Eliela29
    Eloomi29
    Elnomi29
    Elrula29
    Elsomi29
    Ellyla29
    Elttol29
    Elmula29
    Elaces29
    Eleela29
    Eliomi29
    Elotol29
    Elnsho29
    Elrdol29
    Elsula29
    Ellsho29
    
    Ansina33
    Anlles33
    Anthal33
    Anmpal33
    Anamal33
    Anetes33
    Anicho33
    Anosti87
    Anntes33
    Anrsti87
    Anssti87
    Anluse33
    Antres33
    Anmmal33
    Anades33
    Anedes33
    Anieri87
    Anoona33
    Annona33
    Anruse33
    Ansona33
    Anlyal33
    Anttes33
    Anmuse33
    funky words, but words non-the-less.


    Stay tuned kids, this is interesting
    I can do a copy and paste if that's what you want, that's if it's ok with staticn0de?.

  13. #63
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    well yes that's a piece of the puzzle. Otherwise there will be 4 different command lines to invoke oclHashcat to match what setup a person has..

    - nVidia (CUDA) i386 (cudaHashcat32.bin)
    - nVidia (CUDA) x64 (cudaHashcat64.bin)
    - ATi (ocl) i386 (oclHashcat32.bin)
    - ATi (ocl) x64 (oclHashcat64.bin)

    The script statcn0de has created will make your life easier to include oclHashcat in the next FS, I would imagine.

    I do believe that it is ok with staticn0de for you to steal his code and run away. I will not tell.
    Last edited by Quest; 2014-09-15 at 00:06.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  14. #64
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by slim76 View Post
    I can do a copy and paste if that's what you want, that's if it's ok with staticn0de?.
    Sure, use what you can.

    I'll make It less terrible when I get a chance. Add auto detect for ati / NVIDIA and detect 32/64 bit.

  15. #65
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    well I object!

    It is called FrankenScript!! To make it less terrible would go against all international monster conventions. *Geez do I have to explain everything?*


    :P

    .............and now back to our regular broadcasting...........


    so I'm working with 3 different .hcmask files(2 of them I will probly endup fusing together) that I would like to submit under peer review. All 3 files share common features. Minimum 8, maximum 10, last 4 characters can be anything including symbols...

    Code:
    ?d?d?d?d?d?d?a?a?a?a = min8 max10 | 6 numbers |*4 all characters
    
    001999L*
    002999L!
    113999a?
    004999nt
    005999w$T3
    1234567890
    
    
    ?l?l?l?l?l?l?a?a?a?a = min8 max10 | 6 lowercases | 4 all characters
    
    salonang
    saserang
    saichang
    saoteran
    satonang
    sammanges
    sarter7*2b
    saeanang$5
    
    
    ?u?l?l?l?l?l?a?a?a?a = min8 max10 | 1 uppercase | 5 lowercases | 4 all characters
    
    Salonang
    Saserang
    Saichang
    Saoteran
    Satonang
    Sammanges
    Sarter7*2b
    Saeanang$5
    What do you all think? Good or not good?

    also Slim, it will be good to see if you can find a way for the user to build his own syntax, like you did with Crunch, where the user decides the character set, number of characters...
    Last edited by Quest; 2014-09-15 at 00:40.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  16. #66
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580

    sequence

    here is the oclHashcat operational sequence of events (as I see them).

    I've created a wildHashcat folder inside the FrankenScript2 folder.
    Path: /root/FrankenScript2/wildHashcat
    This is only to gather all files oclHashcat FrankenScript related into one place.
    In that wildHashcat folder I've placed 3 .hcmask files.
    8-10-6numbers-4all.hcmask
    8-10-6lower-4all.hcmask
    8-10-1Capitalized-5lower-4all.hcmask

    These files will be used as predefined user options to attack a captured handshake and to make Markov Chains 'kick in'.

    1. The oclHashcat operational sequence should start with a captured handshake and creating a .cap file, just like before. So at this point nothing new for FrankenScript, as it can already do that.

    2. That .cap file must be transformed into a .hccap for oclHashcat to use it.
    Convert .cap into .hccap
    Copy the .cap file to your Home folder. Then enter this command(replace the XXXXXXXXX with the file name).
    Code:
    aircrack-ng XXXXXXXXXXXX.cap -J capture
    A capture.hccap will be created in Home
    I would like a more logical way to do this, so that everything is in the wildHashcat folder...

    3. At this point an attack can be initiated on that newly created .hccap

    Here one syntax that I'm using.
    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin --status -w 3 -t 10 -m 2500 /root/FrankenScript2/wildHashcat/capture.hccap -a 3 /root/FrankenScript2/wildHashcat/8-10-6numbers-4all.mask
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin Path to directory && to start the program.
    --status Will update the progression status automatically every 10 seconds or so.
    -w 3 Not even sure what that does but it works. lol
    -t 10 Markov threshold. Super important. Without the -t argument, Markov will go into "smart brutforce" and now the estimated time will be 45days. -t 10 is about 4hours.
    -m 2500 WPA/2 Hash-type
    /root/FrankenScript2/wildHashcat/capture.hccap Path to capture.hccap file
    -a 3 Attack mode.
    /root/FrankenScript2/wildHashcat/8-10-6numbers-4all.mask Path to .mask file

    would like for staticn0de to shine in on all this...
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  17. #67
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Hey quest, I'm not sure what you want me to shine in on. It all looks good!

    If you wanted hashcat to see the hccap file in the home folder after it was converted, don't use the full path. Replace the path to home with $HOME in the script so it always has a good starting point.

    It would be good to package this script in a deb so it could place files and configs in etc for use. On that, the installer could set up links for hashcat. But, that's all up to slim as I'm just here to appreciate the great work he does.

    @quest, the -w option sets a work load profile.

    The options are 1,2 or 3. Details from hashcat below

    * Workload Profile:

    1 = Reduced performance profile (low latency desktop)
    2 = Default performance profile
    3 = Tuned performance profile (high latency desktop)
    Last edited by staticn0de; 2014-09-16 at 05:26.

  18. #68
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    @Slim

    I was trying out Frankenscript with my new adapter which arrived in the mail. I had the -1 error and could not capture any handshakes.

    I added a one liner at line 232 which looks like this

    Enable_Attack_Mode(){
    <-snip out all of the attack mode section until the last few lines as I'm not copying and pasting ->

    clear
    ifconfig $wlanX down
    airmon-ng start $wlanX

    MAC_Address_Options(){

    I only inserted the line ifconfig $wlanX down. This has fixed the -1 error and i'm capturing handshakes again. I can't see this change causing any errors down the road but it's not fully tested. Would you consider adding it in to the script as I doubt i'm the only person who will run into it.

    Edit:
    @Slim again
    Mate, I was just trying to do an iw dev scan from the menu. It failed so I added a catch so I could see the error and go have a read.

    I have two wifi adapters and am using wlan1 to scan the network. At line 334 you have defined wlan0 as the adapter so it can't detect if I selected a seperate one. I changed the start of this line to:

    iw dev $wlanX scan

    and the problem was solved.
    Last edited by staticn0de; 2014-09-16 at 09:38.

  19. #69
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by staticn0de View Post
    @Slim

    I was trying out Frankenscript with my new adapter which arrived in the mail. I had the -1 error and could not capture any handshakes.

    I added a one liner at line 232 which looks like this

    Enable_Attack_Mode(){
    <-snip out all of the attack mode section until the last few lines as I'm not copying and pasting ->

    clear
    ifconfig $wlanX down
    airmon-ng start $wlanX

    MAC_Address_Options(){

    I only inserted the line ifconfig $wlanX down. This has fixed the -1 error and i'm capturing handshakes again. I can't see this change causing any errors down the road but it's not fully tested. Would you consider adding it in to the script as I doubt i'm the only person who will run into it.

    Edit:
    @Slim again
    Mate, I was just trying to do an iw dev scan from the menu. It failed so I added a catch so I could see the error and go have a read.

    I have two wifi adapters and am using wlan1 to scan the network. At line 334 you have defined wlan0 as the adapter so it can't detect if I selected a seperate one. I changed the start of this line to:

    iw dev $wlanX scan

    and the problem was solved.
    Yeah I'm sorry about the issue's, hopefully this next version will be better. LOL
    I've rewritten most of FrankenScript again and I've made several changes:
    FrankenScript now detects all available WiFi devices and all enabled monitor modes, you can now use multiple WiFi devices and monitor modes.
    You can now perform multiple attacks against the same target or a different target at the same time.

  20. #70
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    sounds good! Maybe what happened to you with the HDD failure, had a purpose? Create new and better things? I've seen it numerous times where something bad would happen, but endedup, ultimately, being a good thing. That is what the apocalypse is, changes by disaster. Maybe the universe is trying to tell you something

    Quote Originally Posted by staticn0de View Post
    ...

    It would be good to package this script in a deb so it could place files and configs in etc for use.

    ...
    oh yes I would like to see that. Hopefully Slim, will take your knowhow and that opportunity to move things ahead


    little more testing with oclHashcat, and a couple of things stands out.

    1. There is nothing to gain by having different lines in one .hccap file, for this reason..
    Mask (?d?d?d?d?d?d?a?a) [8] = 3 hours, 27 mins
    Mask (?d?d?d?d?d?d?a?a?a) [9] = 1 day, 10 hours
    Mask (?d?d?d?d?d?d?a?a?a?a) [10] = 14 days, 11 hours
    In other words, the command line and the 't' argument must be adapted according to the length of the passphrase in relation to the GPU capabilities to keep the time reasonable.

    2. It is obvious now that the user will have to specify his own '-t XX' argument, as we do not have the same GPU, and what is true for me and my GPU is not true for others and their GPUs.
    Here a couple of interesting leads as for building oclHashcat command lines..
    PACK https://thesprawl.org/projects/pack/
    pyHashcat http://hashcat.net/forum/thread-3478.html
    RubyHashcat Wrapper http://hashcat.net/forum/thread-3505.html
    (have not tried any of them)

    3. Not using the '--status' argument anymore, as it remove the ability to pause, resume, bypass, stop.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  21. #71
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Quote Originally Posted by staticn0de View Post

    It would be good to package this script in a deb so it could place files and configs in etc for use. On that, the installer could set up links for hashcat. But, that's all up to slim as I'm just here to appreciate the great work he does.
    and speaking of wrapping FS into a .deb, if FS can be invoked into a simple command, then what would prevent it from making the cut for Kali 1.1.0 ?

    It is scheduled for 1-1-15
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  22. #72
    Join Date
    2013-Oct
    Posts
    321
    Can someone test this out for me and report back please.

    FrankenScript Download:
    http://mir.cr/1XYIKG3H

  23. #73
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    - Kali 1.0.7 x64 -

    Hopefully this is only on my end...


    When choosing:

    # [1] = Deauthenticate all connected clients #
    # [2] = Deauthenticate a specific client #

    or
    # [1] = WEP Chopchop Without Association #
    # [2] = WEP ARPreplay With Association #
    # [3] = WEP Chopchop With Association #
    # [4] = WEP Fragment With Association m

    or
    # [1] = Reaver & Default WPS Pin Keygens #
    # [2] = Reaver Basic Settings #
    # [3] = Reaver Custom Settings #
    # [4] = Bully & Default WPS Pin Keygens #
    # [5] = Bully Bruteforce Settings #
    # [6] = Bully Custom Settings

    all return with the same error:


    There was an error creating the child process for this terminal

    Failed to execute child process "/root/FS3/Scripts/Deauthenticate_all_clients.sh" (Permission denied)

    and does not empty Temp_Working_Dirctory, or exits when choosing [q] = Clean & Exit Script
    Last edited by Quest; 2014-10-03 at 00:39.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  24. #74
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by Quest View Post
    - Kali 1.0.7 x64 -

    Hopefully this is only on my end...


    When choosing:

    # [1] = Deauthenticate all connected clients #
    # [2] = Deauthenticate a specific client #

    or
    # [1] = WEP Chopchop Without Association #
    # [2] = WEP ARPreplay With Association #
    # [3] = WEP Chopchop With Association #
    # [4] = WEP Fragment With Association m

    or
    # [1] = Reaver & Default WPS Pin Keygens #
    # [2] = Reaver Basic Settings #
    # [3] = Reaver Custom Settings #
    # [4] = Bully & Default WPS Pin Keygens #
    # [5] = Bully Bruteforce Settings #
    # [6] = Bully Custom Settings

    all return with the same error:





    and does not empty Temp_Working_Dirctory, or exits when choosing [q] = Clean & Exit Script
    I'm compiling a new live build now from 1.0.9. I'll have a try soon. Also, was the above a typo from you, Quest or the script?
    chown -R us ./base

  25. #75
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    all the .sh permissions "allow executing file as program" are OFF Slim..

    There was an error creating the child process for this terminal

    Failed to execute child process "/root/FS3/Scripts/
    WEP_Chopchop_Without_Association.sh" (Permission denied)
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  26. #76
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Quote Originally Posted by staticn0de View Post
    I'm compiling a new live build now from 1.0.9. I'll have a try soon. Also, was the above a typo from you, Quest or the script?
    no it's a Copy/Paste

    Decompress FS3 yourself and you will see the Temp_Working_Dirctory
    Last edited by Quest; 2014-10-03 at 01:02.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  27. #77
    Join Date
    2013-Oct
    Posts
    321
    Right click on FS3.sh, choose Properties and then select the permissions tab, now tick the Allow executing file as program.
    Then open the Script folder and highlight all of the scripts, right click and then choose Properties and then select the permissions tab, now tick the Allow executing file as program.

  28. #78
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Yes that's what I did. It works better now

    New prbs:

    1.
    [1] = Choose A Visable Client To Deauthenticate.
    [2] = Input A Client To Deauthenticate.
    [q] = Clean & Exit Script.

    Please choose an option: 1

    Input the number of a client or choose an option: 1

    [1] = Basic Set Amount (Is set to send 4 deauth-requests).
    [2] = Custom Amount (Input an amount of deauth-requests to send).
    [q] = Clean & Exit Script.

    Please choose an option: 2

    Input the amount of deauthetication requests to send: 10
    Invalid destination MAC address.
    "aireplay-ng --help" for help.
    Invalid destination MAC address.
    "aireplay-ng --help" for help.
    Checking for a handshake every 7 seconds...
    2.

    or

    [1] = Basic Set Amount (Is set to send 4 deauth-requests).
    [2] = Custom Amount (Input an amount of deauth-requests to send).
    [q] = Clean & Exit Script.

    Please choose an option: 1

    The captured handshake is bad, the file will be deleted.
    Last edited by Quest; 2014-10-03 at 13:21.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  29. #79
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    3.

    still does not clean the Temp folder
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  30. #80
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    3.

    still does not clean the Temp folder
    What's left in the temp folder after you've tried to clen it?.
    Are you running any attacks while trying to clean the temp folder?.

  31. #81
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    - Chosen_AP_Line.txt
    - Scanned_APs.txt

    I choose to exit with [q] at the end. After an attack or after simply after scanning and choosing an AP.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  32. #82
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    - Chosen_AP_Line.txt
    - Scanned_APs.txt

    I choose to exit with [q] at the end. After an attack or after simply after scanning and choosing an AP.
    Scanned_APs.txt isn't meant to be deleted, but it does get overwritten each time you do a scan.
    Chosen_AP_Line.txt I just didn't write a delete option for it, it doesn't effect anything as it get overwritten too.
    Everything else excluding the Handshake_Cracking folder should get deleted.

    Note:
    Attack temp files won't be deleted while running two or more of the same attacks at the same time, the files will remain until the attacks have finished.
    Last edited by slim76; 2014-10-03 at 23:42.

  33. #83
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    and speaking of wrapping FS into a .deb, if FS can be invoked into a simple command, then what would prevent it from making the cut for Kali 1.1.0 ?

    It is scheduled for 1-1-15
    I would package it if I knew how to.
    Does anyone know how to make an installable package?. LOL

  34. #84
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Quote Originally Posted by slim76 View Post
    I would package it if I knew how to.
    Does anyone know how to make an installable package?. LOL
    I certainly do! made one to automatically install cudahashcat because I'm impatient and didn't want to wait for the latest release to appear in the repo.

    I'm going to install everything in the /usr/share folder and have /usr/bin links so users can call frankenscript with the 'frankenscript' command in bash. The catch is, you are normally using /root/ (or $USER, I have not checked.) and you will need to replace instances of $USER or /root/ with /usr/share/frankenscript/

    1. make a folder with name based on the release (i'll assume its in your home directory)

    Code:
    cd ~
    mkdir frankenscript_3.0-1
    2. Make some folders for the scripts that will let frankenscipt be called with the bash command 'frankenscript' and somewhere to install the software.
    Code:
    mkdir frankenscript_3.0-1
    mkdir -p ./usr/bin/
    mkdir -p ./usr/share/frakenscript
    3. Make the script to launch frankenscript from bash
    Code:
    cd ./usr/bin/
    cat <<EOF > frankenscript
    #!/bin/bash 
    cd /usr/share/frankenscript/ && ./FS3.sh "$@"
    EOF
    4. Make it executable
    Code:
    chmod +x frankenscript
    5. Put frankenscript in it's new home
    Code:
    cd ../share/frankenscript/
    unrar -x FS3*.rar
    rm FS3*.rar
    mv FS3/* .
    For this version, you will need to fix the script flags (add +x, but I'm sure you know how to do that)

    6. Move back to the parent folder (frankenscript_3.0-1) and make the metadata files
    Code:
    cd ../../../
    mkdir DEBIAN
    cd DEBIAN
    7. Update the metadata file (this is altered each time you make changes)
    Code:
    cat <<EOF > control
    Package: frankenscript
    Version: 3.0-1
    Section: base
    Priority: optional
    Depends: 
    Maintainer: Slim <slim@frankenscript.com>
    Description: This script allows holistic wireless penetration testing
     for kali linux
     systems
    EOF
    8. Build the deb
    Code:
    cd ../../
    dpkg-deb --build frankenscript_3.0-1
    9. It can now be installed with
    Code:
    dpkg -i frankenscript_3.0-1.deb
    10. Or removed with the following (note the name is the name set in the /DEBIAN/control field 'package' Package: frankenscript
    Code:
    dpkg -r frankenscript
    Last edited by staticn0de; 2014-10-05 at 04:23.
    chown -R us ./base

  35. #85
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Good stuff!

    i do not want to muddy the water at this point, but, let's put some thought into this.

    - me thinks it would easier to invoke FS with 'franken' only, and also, as it will no longer be considered as a simple script as it was before.

    It's like calling Wifite, 'wifitescript'.

    thoughts?
    Last edited by Quest; 2014-10-04 at 14:04.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  36. #86
    Join Date
    2013-Oct
    Posts
    321
    @ staticn0de

    I've managed to successfully pack FrankenScript into an installable .deb file. :-)

    Many thanks for your help mate.

  37. #87
    Join Date
    2013-Oct
    Posts
    321
    I've had a quick look into hashcat but couldn't get it working using a mask file.
    If anyone could help I'd be most greatful.

    This worked:
    hashcat -m 2500 -a 3 XXXXX.hccap ?d?d?d?d?d?d?d?d

    This didn't work:
    hashcat -m 2500 -a 3 XXXXX.hccap Default.hcmask

    Here's the output:
    Code:
    Initializing hashcat v0.47 by atom with 8 threads and 32mb segment-size...
    
    Added hashes from file XXXXX.hccap: 1 (1 salts)
    Activating quick-digest mode for single-hash with salt
    
    NOTE: press enter for status-screen
    
    
    Input.Mode: Mask (D) [1]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (De) [2]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Def) [3]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Defa) [4]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Defau) [5]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Defaul) [6]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default) [7]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default.) [8]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default.h) [9]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default.hc) [10]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default.hcm) [11]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default.hcma) [12]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default.hcmas) [13]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    
    Input.Mode: Mask (Default.hcmask) [14]
    Index.....: 0/1 (segment), 1 (words), 0 (bytes)
    Recovered.: 0/1 hashes, 0/1 salts
    Speed/sec.: - plains, - words
    Progress..: 1/1 (100.00%)
    Running...: --:--:--:--
    Estimated.: --:--:--:--
    
    Started: Sat Oct  4 23:26:04 2014
    Stopped: Sat Oct  4 23:26:04 2014
    Last edited by slim76; 2014-10-04 at 22:32.

  38. #88
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    Edit: you're using hashcat, not ocl/cuda?



    Hey Slim,

    below are two syntax I'm using. The .hccap and .hcmask files being in FrankenScript2/wildHashcat/

    ?l?u?d,?u?l,?2?l?l?l?1?1?1?1 = min8 max8 | 1 uppercase and lowercase | 3 lowercases | 4 all characters no symbols

    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -t 10 -m 2500 /root/FrankenScript2/wildHashcat/capture.hccap -a 3 /root/FrankenScript2/wildHashcat/8=1Capandlower-3lower-4allnosymbols.hcmask
    8=1Capandlower-3lower-4allnosymbols.hcmask
    content of that .hcmask
    Code:
    ?l?u?d,?u?l,?2?l?l?l?1?1?1?1

    sammange
    Cabo2012
    bali35dC





    ?l?u?d,?d?d?d?d?1?1?1?1 = min8 max8 | 4 numbers |*4 all characters no symbols


    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -m 2500 /root/FrankenScript2/wildHashcat/capture.hccap -a 3 /root/FrankenScript2/wildHashcat/8=4numbers-4allnosymbols.hcmask
    8=4numbers-4allnosymbols.hcmask
    content of that .hcmask
    Code:
    ?l?u?d,?d?d?d?d?1?1?1?1

    87654321
    1221JP69
    1975Jack
    Last edited by Quest; 2014-10-04 at 23:05.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  39. #89
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    Edit: you're using hashcat, not ocl/cuda?



    Hey Slim,

    below are two syntax I'm using. The .hccap and .hcmask files being in FrankenScript2/wildHashcat/

    ?l?u?d,?u?l,?2?l?l?l?1?1?1?1 = min8 max8 | 1 uppercase and lowercase | 3 lowercases | 4 all characters no symbols

    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -t 10 -m 2500 /root/FrankenScript2/wildHashcat/capture.hccap -a 3 /root/FrankenScript2/wildHashcat/8=1Capandlower-3lower-4allnosymbols.hcmask
    8=1Capandlower-3lower-4allnosymbols.hcmask
    content of that .hcmask
    Code:
    ?l?u?d,?u?l,?2?l?l?l?1?1?1?1

    sammange
    Cabo2012
    bali35dC





    ?l?u?d,?d?d?d?d?1?1?1?1 = min8 max8 | 4 numbers |*4 all characters no symbols


    Code:
    cd /usr/share/cudahashcat/ && ./cudaHashcat64.bin -w 3 -m 2500 /root/FrankenScript2/wildHashcat/capture.hccap -a 3 /root/FrankenScript2/wildHashcat/8=4numbers-4allnosymbols.hcmask
    8=4numbers-4allnosymbols.hcmask
    content of that .hcmask
    Code:
    ?l?u?d,?d?d?d?d?1?1?1?1

    87654321
    1221JP69
    1975Jack
    Yeah I'm using hashcat at the moment, I really need a new laptop. LOL
    I still cant get the mask attack working, I might have another try at some point though.

  40. #90
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    if I may suggest, sub-contract that portion to staticn0de.

    Rap it up, then staticn0de can ship it right back at you with oclHashcat implemented.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  41. #91
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    if I may suggest, sub-contract that portion to staticn0de.

    Rap it up, then staticn0de can ship it right back at you with oclHashcat implemented.
    I might do that if staticn0de is up for the job, but I'd still need the standard CPU hashcat implemented too.

  42. #92
    Join Date
    2014-Apr
    Location
    Down Under
    Posts
    315
    Of course I can help.

    What do you want to see? This is what i am guessing.

    Maybe a menu option (can be burried in the hascat menu) that lets the user select if they use hashcat, oclhashcat or cudahashcat. Depending on the option they select, it can set an option in a file (perhaps /etc/franken.conf) that will make frankeknscript no longer prompt for what they are using. Another menu option will let the user change their selection.

    I can make it check it hashcat / oclhashcat is installed and if it isn't ask if the user wants it.

    cudahashcat is harder as it's not in the repo. It can link back to my deb I made, otherwise the user will need to download and manually install it.
    chown -R us ./base

  43. #93
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    my friend to the rescue!

    I would not deal with installation of ocl/cuda at all. FS is not a software installation program. Don't go there. Plus as you've mentioned, it's a little too tricky. Let the user deal with that separately.

    for the menu, yes,

    hashcat
    oclhashcat
    cudahashcat

    after selection maybe

    convert .cap into .hccap?

    then

    select the length of the password:user input 8 9 10 ??


    Let's see what you come up with....
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  44. #94
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580

    hash type(s)?

    do we want to cover the whole hashes spectrum, or stay within WPA/2 only? Would be nice to cover every possibility but that's alot of work...

    * Generic hash types:

    0 = MD5
    10 = md5($pass.$salt)
    20 = md5($salt.$pass)
    30 = md5(unicode($pass).$salt)
    40 = md5($salt.unicode($pass))
    snip
    2500 = WPA/WPA2
    snip
    8900 = scrypt
    9000 = Password Safe v2
    9100 = Lotus Notes/Domino 8

    * Specific hash types:

    11 = Joomla < 2.5.18
    12 = PostgreSQL
    snip
    3711 = Mediawiki B type
    62XY = TrueCrypt 5.0+
    snip
    http://hashcat.net/wiki/doku.php?id=oclhashcat
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  45. #95
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580

    .hcmask

    staticn0de,

    Here are the .hcmask I'm using (descriptive name of the file and content of that file). I do believe that it would be a good starting point for any user. FS, however, should be able to go into the wildHashcat folder and bring up any .hcmask file it finds.

    8=1Capandlower-3lower-4allnosymbols.hcmask
    Code:
    ?l?u?d,?u?l,?2?l?l?l?1?1?1?1
    8=4numbers-4allnosymbols.hcmask
    Code:
    ?l?u?d,?d?d?d?d?1?1?1?1
    9=1Capandlower-4lower-4allnosymbols.hcmask
    Code:
    ?l?u?d,?u?l,?2?l?l?l?l?1?1?1?1
    9=5numbers-4allnosymbols.hcmask
    Code:
    ?l?u?d,?d?d?d?d?d?1?1?1?1
    10=1Capandlower-5lower-4allnosymbols.hcmask
    Code:
    ?l?u?d,?u?l,?2?l?l?l?l?l?1?1?1?1
    10=6numbers-4allnosymbols.hcmask
    Code:
    ?l?u?d,?d?d?d?d?d?d?1?1?1?1
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  46. #96
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580

    Exclamation FS3 still cannot create a .cap file...

    Slim,


    The captured handshake is bad, the file will be deleted.

    [1] = Retry attack.
    [q] = Exit attack.
    Please choose an option?:

    can anyone else reproduce this?
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  47. #97
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    Slim,





    can anyone else reproduce this?
    Nothing wrong with FS3.
    Pyrit checks the capture.cap file for a valid handshake, it looks like yours was bad. lol
    Use the retry option until you get a good handshake.

  48. #98
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    really?

    - I've not had 1 good handshake with FS3
    - That never happened, not once, with previous versions

    completely mystified and skeptic here
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  49. #99
    Join Date
    2013-Aug
    Location
    lost in space
    Posts
    580
    what about that?..

    [1] = Basic Set Amount (Is set to send 4 deauth-requests).
    [2] = Custom Amount (Input an amount of deauth-requests to send).
    [q] = Clean & Exit Script.
    Please choose an option: 2
    Input the amount of deauthetication requests to send: 8
    Invalid destination MAC address.
    "aireplay-ng --help" for help.
    Invalid destination MAC address.
    "aireplay-ng --help" for help.
    Checking for a handshake every 7 seconds...
    Invalid destination MAC address.
    "aireplay-ng --help" for help.
    Checking for a handshake every 7 seconds...


    something is outa wack =( not getting anywhere with handshakes.
    Kali Linux USB Installation using LinuxLive USB Creator
    Howto Install HDD Kali on a USB Key
    Clean your laptop fan | basic knowledge

  50. #100
    Join Date
    2013-Oct
    Posts
    321
    Quote Originally Posted by Quest View Post
    what about that?..







    something is outa wack =( not getting anywhere with handshakes.
    I found it, it happens after the option "[2] = Deauthenticate a specific client" but before option "[2] = Custom Amount (Input an amount of deauth-requests to send).".

    I'll try and fix it as soon as I get chance.

Similar Threads

  1. Howto live usb on a uefi32 and X64 HW :confused:
    By snoopy1949 in forum General Archive
    Replies: 3
    Last Post: 2016-12-27, 06:49
  2. Replies: 492
    Last Post: 2016-10-27, 05:30
  3. Kali 2.0 USB persistent: old howto no more valid
    By ovosodo in forum Installing Archive
    Replies: 5
    Last Post: 2015-08-15, 09:45
  4. Howto HDD installation on a USB key
    By Quest in forum How-To Archive
    Replies: 5
    Last Post: 2015-02-12, 16:18

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •