Results 1 to 6 of 6

Thread: Intel Graphics question / support request

  1. #1

    Intel Graphics question / support request

    Hello everyone I am fairly new to kali. I admit i've been still using BT2 until I installed kali today. Here is my one and only problem so far... I wanted to get my graphics driver installed, however I can't seem to figure it out. Here is the details of said integrated graphics.


    VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) (prog-if 00 [VGA controller])
    Subsystem: Dell Device 05e9
    Flags: bus master, fast devsel, latency 0, IRQ 63
    Memory at b0000000 (64-bit, non-prefetchable) [size=4M]
    Memory at a0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at 4000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [d0] Power Management version 2
    Capabilities: [a4] PCI Advanced Features
    Kernel driver in use: i915


    Any help would be greatly appreciated!

  2. #2
    Join Date
    2014-Aug
    Posts
    7
    Not to Hijack your thread, but I'm also having issues with Intel integraded graphics and the HD 4600.

    When connected to the VGA or HDMI the output only gets displayed in the corner of the monitor.

    In Displays in System Settings the resolutions are greyed out and marked as unkown.

    aptitude show xserver-xorg-video-intel
    Package: xserver-xorg-video-intel
    State: installed
    Automatically installed: yes
    Version: 2:2.19.0-6
    Priority: optional
    Section: x11
    Maintainer: Debian X Strike Force <[email protected]>
    Architecture: amd64
    Uncompressed Size: 2,085 k
    Depends: libc6 (>= 2.8), libdrm-intel1 (>= 2.4.29), libdrm2 (>= 2.4.30),
    libpciaccess0 (>= 0.8.0+git20071002), libudev0 (>= 146), libx11-6,
    libx11-xcb1, libxcb-dri2-0, libxcb-util0 (>= 0.3.8), libxcb1, libxext6,
    libxfixes3, libxv1, libxvmc1, xorg-video-abi-12, xserver-xorg-core (>=
    2:1.12.3.901)
    Provides: xorg-driver-video
    Description: X.Org X server -- Intel i8xx, i9xx display driver
    This package provides the driver for the Intel i8xx and i9xx family of
    chipsets, including i810, i815, i830, i845, i855, i865, i915, i945 and i965
    series chips.

    This package also provides XvMC (XVideo Motion Compensation) drivers for
    i810/i815 and i9xx and newer chipsets.

    More information about X.Org can be found at: <URL:http://www.X.org>

    This package is built from the X.org xf86-video-intel driver module.

    Tags: admin::hardware, hardware::video, implemented-in::c, role:lugin,
    use::driver, x11::xserver

    lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)


    Maybe someone can help us?

  3. #3
    Join Date
    2014-Aug
    Posts
    4
    Same problem here...Ive been googling it for a few weeks to no help lol...I have intel 4400 graphics been trying **** near everything within my knowledge base :/ good luck

  4. #4
    Join Date
    2014-Aug
    Posts
    7
    Hoping someone here can help with this.

    There doesn't seem to be much response on these forums.

    I've been asking over at Debian forums but with no such luck.

    The Intel Haswell integrated graphics has been out for a year so I'm confusd into why its not supported properly.

    Please can someone help?

  5. #5
    Join Date
    2013-Mar
    Location
    Canada
    Posts
    30

  6. #6
    Join Date
    2015-Apr
    Posts
    2
    I had hd 4000 my cali in fallback mode can anyone help me with that issue

Similar Threads

  1. Intel Graphics not working
    By sharmamadhus in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2020-11-28, 15:01
  2. Intel graphics
    By Francois072 in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2020-02-14, 14:53
  3. [Support Request] Installing WiFi Dongle
    By dennisblah in forum TroubleShooting Archive
    Replies: 0
    Last Post: 2016-08-24, 19:12
  4. Intel HD graphics drivers, I'm guessing theres no support yet?
    By markwerline in forum General Archive
    Replies: 0
    Last Post: 2015-04-26, 02:48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •